750 Nicholas Blvd, Elk Grove Village, IL  60007 U.S.A. 847-439-2126

BLADES - THE GRANULATOR SUPERSTORE ®

Home Up Spare Parts Specials Just Arrived New Material Handling Rebuilt To 10 HP Rebuilt 15-30 HP Rebuilt 35+ HP Cumberland™ Sterling Kongskilde Re-Tech Shredders Financing Search About Us Contact Us Knife Sharpening

35-60 HP Granulators

 

Dull Knives?  We sharpen most knives for .55 cents per inch - Details Here

Quotation Request Form                                         Click On Any Photo To Enlarge

Stock # Description Picture
10216 CUMBERLAND MODEL 20C GRANULATOR, S/N 842-5913, 9" X 20" FEED THROAT, 3 KNIFE RADIAL ROTOR, 2 BED KNIFE, 50 HP 208-220/440 VOLT 1175 RPM DIRECT DRIVE MOTOR, CASE HARDENED CUTTING CHAMBER, TRAY FEED HOPPER, GRAVITY DISCHARGE, MOUNTED ON A 78"W X 36"D X 22.5"H BASE, COMPLETE WITH STARTER AND CONTROLS
6686 RAPID MODEL 1224K GRANULATOR, S/N 60.1226, 12" X 24" FEED THROAT, 3 KNIFE OPEN ROTOR, 2 BED KNIFE, 40 HP 230/460 VOLT MOTOR, INSULATED TRAY FEED HOPPER, INSULATED BODY PANELS, 6" RIGHT HAND AIRVEYOR DISCHARGE, ON CASTERS, COMPLETE WITH STARTER AND CONTROLS
3383 GLOUCESTER MODEL 1225, 12" X 25" FEED THROAT, 5 KNIFE OPEN ROTOR, 2 BED KNIFE, 40 HP 230/460 VOLT MOTOR  
6455 GRANUTEC MODEL 1424TF GRANULATOR, S/N 289-1111, 14" X 24" FEED THROAT, 3 KNIFE OPEN ROTOR, 2 BED KNIFE, 50 HP 230/460 VOLT MOTOR, INSULATED TRAY FEED HOPPER WITH MOTORIZED TILT BACK ASSIST, AIRVEYOR DISCHARGE TO INCLUDED KONGSKILDE POLYVAC SYSTEM, FORKLIFT RAIL ENTRY BASE, COMPLETE WITH STARTER AND CONTROLS FOR GRANULATOR AND POLYVAC
6814 WHITAKER MODEL 360B HEAVY DUTY PAPER DISINTEGRATOR
S/N 491546-97001, 14" X 26" FEED THROAT, 3 KNIFE TWIN SHEAR OPEN ROTOR, 2 BED KNIFE, 60 HP 230/460 VOLT MOTOR, DUAL FLYWHEEL, INSULATED TRAY FEED HOPPER, 6" OD LEFT HAND AIRVEYOR DISCHARGE, FORKLIFT RAIL BASE, STARTER & CONTROLS ARE NOT INCLUDED. EVALUATED AND APPROVED FOR PAPER AND KEY TAPE MATERIAL UP TO 3" THICK IN ACCORDANCE WITH NSA/CSS 02-02 DOCUMENT DESTRUCTION SPECIFICATIONS
6847 NELMOR MODEL G1454MB GRANULATOR, S/N 8607-24405, 14" X 54" FEED THROAT, 3 KNIFE SOLID ROTOR, 2 BED KNIFE, 50 HP 230/460 VOLT MOTOR, AMBIT 6" DIAMETER X 54" WIDE KNURLED STEEL CRUSHER FEED ROLL IN-FEED, FEED ROLLS ARE POWERED BY A 3 HP A/C MOTOR WITH VARIABLE SPEED CONTROLLER VIA CHAIN & SPROCKET DRIVE THROUGH A GEAR BOX, AIRVEYOR DISCHARGE WITH BINDICATOR AND 4" OD OUTLET, GRANULATOR IS MOUNTED ON 44" TALL LEG BASE MOUNTED TO A PLATE WITH V-CASTERS, INCLUDES STAND ALONE CONTROL PANEL WITH A SIZE 4 STARTER & CONTROLS FOR THE GRANULATOR
6844 NELMOR MODEL G1454MB GRANULATOR, S/N 8007-11566, 14" X 54" FEED THROAT, 3 KNIFE SOLID ROTOR, 2 BED KNIFE, 50 HP 230/460 VOLT MOTOR, TRAY FEED HOPPER, AIRVEYOR DISCHARGE WITH BINDICATOR AND 4" OD OUTLET, MOUNTED ON A 57" TALL LEG BASE MOUNTED TO A PLATE WITH V-CASTERS, INCLUDES CONTROL PANEL WITH NEMA SIZE 4 STARTER FOR THE GRANULATOR, SIZE 2 STARTER FOR A DISCHARGE BLOWER, PANEL HAS CONTROLS FOR GRANULATOR AND BLOWER (FEED ROLLS IN PICTURES ARE NOT INCLUDED)
10310 CUMBERLAND MODEL 1456I GRANULATOR, NO S/N, 14" X 56" FEED THROAT, 3 KNIFE TWIN SHEAR OPEN ROTOR, 2 BED KNIFE, 50 HP 230/460 VOLT 1185 RPM MOTOR, MOUNTED ON CASTERS, WITH FORKLIFT RAILS, 5.5" X 9.5" AIRVEYOR OUTLET, NO STARTER OR CONTROLS
6407 CUMBERLAND MODEL 1524B GRANULATOR, S/N 58500-7055R
15" X 24" FEED THROAT, 3 KNIFE RADIAL ROTOR, 2 BED KNIFE, 50 HP 230/460 VOLT MOTOR, TRAY FEED HOPPER, 6" AIRVEYOR DISCHARGE, MOUNTED ON 22" HIGH PLATE BASE, STARTER AND CONTROLS NOT INCLUDED 		 
2545 FOREMOST MODEL S45, S/N 24461, 16" X 45" FEED THROAT, 3 KNIFE SOLID ROTOR, 2 BED KNIFE, DUAL 30 HP 230/460 VOLT MOTORS, AIRVEYOR DISCHARGE  
10312 NELMOR MODEL G1820M GRANULATOR, S/N 8710-26079, 18" X 20' FEED THROAT, 3 KNIFE OPEN ROTOR, 2 BED KNIFE, 40 HP 460 VOLT MOTOR, REAR FACING TOP FEED HOPPER, 6" LEFT HAND AIRVEYOR DISCHARGE, FORKLIFT RAIL BASE, SOUND SUPPRESSION ENCLOSURE, COMPLETE WITH STARTER AND CONTROLS
3727 RAPID MODEL 1824K, S/N 150.19, 18" X 24" TANGENTIAL FEED THROAT, 3 OR 5 KNIFE NEW ROTOR (CUSTOMER SPECIFIED), 2 BED KNIFE, 50 HP 230/460 VOLT MOTOR, SOUND PROOFED, TILT BACK TRAY FEED HOPPER, 6" AIRVEYOR DISCHARGE, COMPLETE WITH STARTER AND CONTROLS, 1986 MODEL YEAR.
6293 RAPID MODEL 1824K GRANULATOR, NO S/N, 18" X 24", FEED THROAT, 3 KNIFE OPEN ROTOR, 2 BED KNIFE, 50 HP 230/460 VOLT MOTOR, INSULATED TRAY FEED HOPPER, INSULATED BODY PANELS, 6" LEFT HAND AIRVEYOR DISCHARGE, FORKLIFT STYLE BASE WITH MOUNT PADS, COMPLETE WITH STARTER AND CONTROLS
5583 RAPID MODEL 1824K GRANULATOR, S/N 150.149, 18" X 24" FEED THROAT, 3 KNIFE OPEN ROTOR, 2 BED KNIFE, 50 HP 230/460 VOLT MOTOR, DUAL FLYWHEELS, 4" X 23.25" SHEET FEED ONLY, SOUND PACKAGE, 6" AIRVEYOR DISCHARGE, MOUNTED ON VIBRATION CONTROL PADS  
5783 CUMBERLAND MODEL 1828B GRANULATOR, S/N 49410-686, 18" X 28" FEED THROAT, 3 KNIFE STEEP ANGLE ROTOR, 2 BED KNIFE, 40 HP 460 VOLT MOTOR, TRAY FEED HOPPER, GAYLORD DISCHARGE LEG BASE, INCLUDES STARTER AND CONTROLS  
6197 NELMOR MODEL G1830M GRANULATOR, NO S/N, 18" X 30"
FEED THROAT, 3 KNIFE OPEN ROTOR, 2 BED KNIFE, 50 HP 230/460 VOLT MOTOR, TRAY FEED HOPPER, 6" RIGHT HAND AIRVEYOR DISCHARGE, SOUND SUPPRESSION ENCLOSURE, FORKLIFT BASE, COMPLETE WITH STARTER AND CONTROLS FOR GRANULATOR AND A 5 HP BLOWER
6198 NELMOR MODEL G1830M GRANULATOR, NO S/N, 18" X 30"
FEED THROAT, 3 KNIFE OPEN ROTOR, 2 BED KNIFE, 40 HP 230/460 VOLT MOTOR, TRAY FEED HOPPER, 6" RIGHT HAND AIRVEYOR DISCHARGE, SOUND SUPPRESSION ENCLOSURE, FORKLIFT BASE, STARTER AND CONTROLS NOT INCLUDED
6232 NELMOR MODEL G1830M GRANULATOR, S/N 8804-27612,
18" X 30" FEED THROAT, 3 KNIFE OPEN ROTOR, 2 BED
KNIFE, 50 HP 230/460 VOLT MOTOR, TRAY FEED HOPPER WITH CLEAN OUT DOOR, 6" LEFT HAND AIRVEYOR
DISCHARGE, FORKLIFT BASE, COMPLETE WITH STARTER
AND CONTROLS FOR GRANULATOR AND A BLOWER
10214 RAPID MODEL 1831K GRANULATOR, S/N 70.124, 18" X 31" FEED THROAT, 3 KNIFE OPEN ROTOR, 2 BED KNIFE, 40 HP 230/460 VOLT MOTOR, INSULATED TRAY FEED HOPPER W/PNEUMATIC TILT BACK ASSIST, DUAL FLYWHEEL, PNEUMATIC DROP DOWN SCREEN CRADLE, 4" X 30.5" REAR SHEET FEED, INSULATED BODY PANELS, ON MOUNT PADS, 6" LEFT HAND AIRVEYOR DISCHARGE, INCLUDES STARTER WITH CONTROLS
10224 RAPID MODEL 1831K GRANULATOR, S/N 70.135, 18" X 31" FEED THROAT, 3 KNIFE OPEN ROTOR, 2 BED KNIFE, 50 HP 460 VOLT MOTOR, INSULATED TRAY FEED HOPPER WITH PNEUMATIC TILT BACK, INSULATED BODY PANELS, PNEUMATIC DROP DOWN SCREEN CRADLE, DUAL FLYWHEEL,
6" RIGHT HAND AIRVEYOR DISCHARGE, ON MOUNTING PADS
WITH STARTER AND CONTROLS
10113 CUMBERLAND MODEL 1836 GRANULATOR, S/N 36500-91011,
18" X 36" FEED THROAT, 3 KNIFE OPEN ROTOR WITH KNIFE CARRIERS, 2 BED KNIFE, 60 HP 460 VOLT MOTOR, DUAL FLYWHEEL, TANGENTIAL CUTTING CHAMBER, INSULATED TRAY FEED HOPPER AND BODY PANELS, 8" LEFT HAND AIRVEYOR DISCHARGE, FORKLIFT RAIL BASE, STARTER AND CONTROLS NOT INCLUDED		  
6897 NELMOR MODEL G2020M GRANULATOR, S/N 9401-34190, 20" X 20" FEED THROAT, 3 KNIFE OPEN ROTOR, 2 BED KNIFE, 40 HP 230/460 VOLT MOTOR, LEFT HAND CONVEYOR FEED HOPPER, SOUND SUPPRESSION PACKAGE, 6" RIGHT HAND AIRVEYOR DISCHARGE, FORKLIFT STYLE BASE, COMPLETE WITH STARTER AND CONTROLS
4463 CONAIR MODEL 2028, 5 KNIFE OPEN ROTOR, 2 BED KNIFE, 50 HP 230/460 VOLT 1760 RPM MOTOR, 26" X 30" TILT BACK TRAY FEED HOPPER DRIVEN BY A DUFF NORTON ACTUATOR, 19" LEG BASE, 6" AIRVEYOR DISCHARGE, FEED ROLL SYSTEM WITH KNURLED STEEL ROLLS 28" WIDE DRIVEN BY A FINCOR MODEL 2600 DC VARIABLE SPEED DRIVE, STAND ALONE STARTER/CONTROL PANEL FOR GRANULATOR INCLUDED
1725 CONDUX MODEL CS500/1000-III, S/N 44, 20" X 40" FEED THROAT, 6 KNIFE BEAM SUPPORT ROTOR, 2 BED KNIFE, 24" BASE
5279 WORTEX MODEL HD2056 GRANULATOR, S/N H1735, 20" X 56" FEED THROAT, 3 KNIFE OPEN ROTOR, 2 BED KNIFE DUAL 50 HP 460 VOLT MOTOR, DUAL FLY-WHEEL, TRAY FEED HOPPER WITH REAR PADDLE FEED DRIVEN BY A 3 HP 460 VOLT MOTOR THROUGH GEARBOX, 6" OD AIRVEYOR DISCHARGE EVACUATED BY A 5 HP 460 VOLT BLOWER WITH 6" OD INLET AND OUTLET, UNIT COMES CONTROL PANEL AND STARTERS FOR THE GRANULATOR, BLOWER, FEED ROLLS, CRUSHER ROLLS, AND HYDRAULIC PUMP
4349 CUMBERLAND 2428, 24" X 28" FEED THROAT, 3 KNIFE OPEN ROTOR, 2 BED KNIFE, 40 HP 230/460 VOLT MOTOR, TRAY FEED HOPPER, 24" TALL STEEL BASE, 8" AIRVEYOR DISCHARGE, CUSTOMER SUPPLIED STARTER AND CONTROLS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Home Up

Send mail to blades@bladesmachinery.com with questions or comments about this web site.
Copyright © 2000-2009 Blades Machinery Co., Inc.
Last modified: March 04, 2009

Notice:  Blades Machinery Co., Inc. buys, sells, and trades equipment on a daily basis, Therefore items contained on this entire web site are subject to prior sale or other disposition.  Although we strive for complete accuracy, Blades Machinery Co., Inc. can not be responsible for errors in description, omissions, typographical errors, etc.  Terms for used equipment require full payment prior to shipment and are F.O.B. shipping location.  Most equipment is available for inspection and or an arranged approval shipment.  Most photographs contained herein are of the actual equipment, but in a few cases a photo of a comparable item is used for visual reference only.