|
| |
Quotation Request Form
Click On Any Photo To Enlarge
|
Stock # |
Description |
Picture |
|
6684 |
BROWN THERMOFORMING LINE MODEL CS-4500, S/N 13331, MFG 1997, 40" W X 42" L MAX MOLD SIZE,
1600 LBS MAX TOOL WEIGHT ON TOP & BOTTOM PLATENS, 42" MAX SHEET WIDTH, 7" MAX DEPTH
OF DRAW ABOVE & BELOW SHEET LINE, 100 PSI MAX FORMING PRESSURE, JUST
INSTALLED NEW YASKAWA MODEL SGDH-1ADE & SGDH-60DE UPGRADED SERVO DRIVES FOR
TOP/BOTTOM PLATENS & MATERIAL INDEX, NEW YASKAWA DRIVE MOTORS, 4 STOP
OVEN-CAL ROD BOTTOM & CERAMIC TOP, 184" LONG OVEN LENGTH, AUTO LUBE
SYSTEM, BROWN MODEL T300 30 TON TRIM PRESS,
S/N 11028,
COMPLETE WITH CANOPY AND ALL DRIVES AND CONTROLS |
Photo Gallery |
|
6725 |
LYLE THERMOFORMING LINE MODEL 140FM, S/N
106020404/RW, 480 VOLTS, 433.8 AMPS, 12" TO 41" SHEET SIZE, CLAMSHELL RH
HINGE OVEN STYLE, 170" OVEN LENGTH, 9 HEATER ZONES TOP AND 6 ZONES BOTTOM,
42" MAX INDRAMAT SERVO DRIVE, 15" TOP PLATEN OPENING, 10.125 BOTTOM PLATEN
OPENING, 4" DEPTH OF DRAW, 40" X 40" MAX MOLD SIZE, AUTO LUBE STATION, UNWIND STAND, INCLUDES BROWN
MODEL T-301 TRIM PRESS, S/N 10727, 480 VOLTS, 80 AMPS, AUTO LUBE STATION,
COMPLETE WITH CANOPY AND STAND ALONE CONTROL PANEL, THERMO FORMER BUILT LATE
80'S AND REBUILT BY LYLE IN 1995 |
Photo Gallery |
|
6681 |
LYLE THERMOFORMING LINE MODEL 140FM, S/N
42440, MFG 6/99, 40"W X 42"L MAX MOLD SIZE, 45 MAX CPM STROKE SPEED, 9"
PLATEN STROKE, 80 TONS FORMING PRESSURE, 43" MAX SHEET WIDTH, 160" LONG
OVEN, 7" MAX DRAW, 25.125" MINIMUM DAYLIGHT PLATEN CLOSED, 15 1/16 SHEET TO
TOP OF PLATEN, 10 1/16 SHEET TO BOTTOM OF PLATEN, LYLE MODEL 140P2 TRIM
PRESS, S/N 42441, MFG 6/99, 30 TON WORKING CAP, 43" MAX SHEET SIZE, 10 HP
DRIVE, 80 CPM, 4, 5, 6, 7.5, 9, & 10.5" STROKE ADJUSTMENT, 12.25"H X 40.5"
WIDTH STATIONARY PLATEN OPENING |
Photo Gallery |
|
6635 |
BROWN THERMOFORMING LINE MODEL CS-4500, S/N 12881,
MFG 5/1995, 40"W X 42"L MAX MOLD SIZE,
MAX MOLD WEIGHT TOP PLATEN = 1000 LBS, MAX MOLD WEIGHT BOTTOM PLATEN = 1600
LBS, 7" MAX DEPTH
DRAW ABOVE & BELOW SHEET LINE, MAX SHEET WIDTH = 42", 100 PSI MAX FORMING PRESSURE, INDRAMAT 3 AXIS
A/C SERVO DRIVE - TOP PLATEN UP/DOWN - BOTTOM PLATEN UP/DOWN & MATERIAL
INDEX FORWARD, INDEX LENGTH 0-60", INDEX SPEED 0-206" PER SECOND, INDEX
ACCELERATION MAXIMUM 600" PER SECOND, INDEX JOG SPEED 0-30" PER SECOND,
OVEN: 168" LONG 4 STOP
OVEN-CAL ROD BOTTOM & CERAMIC TOP, AUTO LUBE
SYSTEM, 240 KVA AVERAGE POWER CONSUMPTION, BROWN T340 30 TON TRIM PRESS, S/N
13787, MFG 1999, 4.5" MIN ADJUST STROKE TO 16.5" MAX, 12.25" X 40"
MAX STATIONARY PLATEN OPENING, 43" MAX SHEET WIDTH, 10 HP VARIABLE DRIVE,
17 KVA, SERVO EJECTOR KIT MFG 4/99 S/N 31807, COMPLETE WITH CANOPY AND
ALL DRIVES AND CONTROLS (TWO COMPLETE LINES AVAILABLE - STOCK NO. 6684) |
Photo Gallery |
|
6523 |
LYLE INC LAB SIZE THERMO FORMER (SHUTTLE
MACHINE), 42" X 32" APPROXIMATE SHEET SIZE, S/N DM1229, 480 VOLT OPERATION,
NEEDS CONTROLS AND SOME WORK |
 |
|
4805 |
BROWN MODEL T30 TRIM PRESS, 17" X 58" CAST PLATEN |
 |
INDRAMAT ELECTRICAL COMPONENTS
|
Stock # |
Description |
|
10123 |
INDRAMAT A/C DRIVE POWER SUPPLY, MODEL
KVR-1.3-30-3, PART # 11263543, S/N 266841-01268, MFG 1998, NOT USED SINCE
SERVICED 12-13-04, VERIFIED AND CALIBRATED |
|
10124 |
INDRAMAT A/C DRIVE POWER SUPPLY MODEL
KVR-1.3-30-3, S/N 266841-01752, PART # 11263543R, MFG 1998, NEW POWER SUPPLY
AND MAIN CONTROLLER CARD, LOAD
TESTED 2 HOURS AND CALIBRATED |
|
10125 |
INDRAMAT A/C SERVO POWER SUPPLY, MODEL
TVD-1.3-15-03, S/N 268595-03481, PART # 11268888, MFG 1997 |
|
10126 |
INDRAMAT PERMANENT MAGNETIC MOTOR, S/N
MDD093-14956, PART # MDD093B-N-020-N2L-110PB0, MFG 1997, CLEANED, NEW
BEARINGS & FLANGES, TESTED
CLOSED LOOP FOR ONE HOUR, FULLY CALIBRATED |
|
10127 |
INDRAMAT PERMANENT MAGNETIC MOTOR, S/N
MDD093-25417, MODEL # MDD093B-N-020-N2L-110PB0, PART # 254267, MFG 2002
|
|
10128 |
INDRAMAT A/C SERVO DRIVE UNIT, S/N
245552-06628, MODEL CLM-01.3-X-0-4-0, HARDWARE # CLM01.2/CLM1.3, SOFTWARE #
LA1-03V14, MFG 1992 |
Quotation Request Form
Click On Any Photo To Enlarge |
