|
| |
Quotation Request Form
Click On Any Photo To Enlarge
|
Stock # |
Description |
Picture |
|
6707 |
MAGUIRE MODEL WSB420
WEIGH SCALE BLENDER, S/N 106557-26, 2 COMPONENTS, 1000-1200 LBS PER HOUR
CAPACITY, 110 VOLT OPERATION, 100 RECIPE PROGRAMMABLE CONTROLLER, GAYLORD
HEIGHT STAND, INCLUDES MLS180 CLEAR VIEW LOADER SYSTEM, S/N 70686-01, TWO
MODEL AVR-10 10 LB RECEIVERS, VACUUM LINES,
POSITIVE DISPLACEMENT LOADER PUMP, AND EIGHT
RECEIVER CONTROLLER, ALL IN LIKE NEW CONDITION,
2004 MODEL YEAR AND LESS THAN 1500 HOURS SYSTEM |
     |
|
6694 |
HYDRACLAIM MODEL RWIMB
WEIGH RATIO BLENDER, S/N 9668A, 300 LBS PER HOUR MAXIMUM THROUGHPUT, 120
VOLT OPERATION, PRESS MOUNT, APPROX 1 CUBIC FOOT
ADDITIVE HOPPER WITH DUAL PROPORTIONAL VALVES, 1.5" OD VACUUM INLETS,
FORKLIFT RAIL ENTRY FOR PORTABILITY, POSITIVE DISPLACEMENT LOADER PUMP,
CONTROLLER NOT INCLUDED. (11 AVAILABLE) |
 |
|
6450 |
MAGUIRE MODEL WSB240F 4 COMPONENT BLENDER,
S/N 91060, UP TO 900 LBS/HOUR, 4 SLIDE GATES, HOPPER MATERIAL LEVEL SENSORS,
HOPPER SITE GLASSES, GAYLORD GRAVITY DISCHARGE INTO APPROXIMATE 30 CUBIC
FOOT MATERIAL FLO-THRU BIN, 100 RECIPE PROGRAMMABLE CONTROLLER WITH 12
COMPONENT PROGRAMMING UPGRADE (ALLOWS FINER CONTROL OVER EACH
COMPONENT), ALSO INCLUDES THREE VACUUM MATERIAL RECEIVERS MANUFACTURED IN
10/1998
|
  |
|
6453 |
MAGUIRE MODEL WSB440F 4
COMPONENT BLENDER, S/N 93993-04, UP TO
1450 LBS/HOUR, 4 SLIDE GATES, HOPPER MATERIAL
LEVEL SENSORS, HOPPER SITE GLASSES, GAYLORD
GRAVITY DISCHARGE INTO APPROXIMATE 30 CUBIC FOOT MATERIAL FLO-THRU BIN, 100
RECIPE PROGRAMMABLE CONTROLLER WITH 12 COMPONENT PROGRAMMING UPGRADE (ALLOWS
FINER CONTROL OVER EACH COMPONENT), ALSO INCLUDES THREE VACUUM MATERIAL
RECEIVERS MANUFACTURED IN 2000 |
   |
|
6188 |
BLENDING SYSTEM
CONSISTING OF DAVIS 120 CUBIC FOOT CAPACITY RIBBON BLENDER, S/N 01166-520,
CARBON STEEL CONSTRUCTION, 10 HP MOTOR INTO CHAIN AND SPROCKET DRIVE, 12" X
16" END DISCHARGE WITH SAFETY GRATE AND MANUAL CRANK SLIDE GATE, 49"
DISCHARGE CLEARANCE. NATIONAL BULK EQUIPMENT POWER AUGER BIN,
APPROXIMATE 2 HP GEAR-MOTOR DRIVING A 12' LONG X 6" DIAMETER AUGER WHICH DISCHARGES INTO
THE BLENDER. IMCS MODEL 20-5018 GAYLORD DUMPER, S/N 13796, MOUNTED ON
16" FRAME TO FEED POWER AUGER |
    |
|
5618 |
CONAIR
AUTOWEIGH GRAVIMETRIC BLENDER, MODEL GB184X, S/N 59614, 39.7 LBS BATCH SIZE,
4114 LBS PER HOUR MAXIMUM THROUGHPUT, 6.7 CUBIC FOOT MAIN INGREDIENT BIN
CAPACITY, 3.8 CUBIC FOOT MINOR INGREDIENT CAPACITY, 8 MATERIALS MAXIMUM, 4
DISCHARGE VALVES, 4 BIN COMPARTMENTS, FOUR 15" DIAMETER VACUUM RECEIVERS AND
TWO 12" VACUUM RECEIVERS, UP TO 4 ADDITIVE FEEDERS CAN BE USED, 4 TO 12
COMPONENT DIGITAL CONTROLLER. SPECIFICATION SHEET CAN BE DOWNLOADED
HERE
|
     |
|
5619 |
CONAIR
AUTOWEIGH GRAVIMETRIC BLENDER, MODEL GB22X, S/N 67558, 2 COMPONENTS, 4.4 LBS
BATCH SIZE, 1239 LBS PER HOUR MAXIMUM THROUGHPUT, 2.2 CUBIC FOOT BIN
CAPACITY, 2 DISCHARGE VALVES, TWO 12" VACUUM RECEIVERS, 4 TO 12 COMPONENT
DIGITAL CONTROLLER, SPECIFICATION SHEET CAN BE DOWNLOADED
HERE |
  |
|
1550 |
PACIFIC ENGINEERING MODEL IIICS-FTOC, S/N 3AC2282-181, 3 COMPARTMENT
VIBRATORY BLENDER |
 |
|
3760 |
HYDROCLAIM 400HC, S/N 8456C, 4 Compartment Blender, Unit Has Two 2" Augers,
Two 3/4" Augers. Unit Also Includes 3 AEC Receivers & Newer 1998
Controller. 1997 model year |
 |
|
4431 |
S/N 34677, Gravimetric Blender, Consists of Two Hoppers,
1 ring Compressor And 1 FMC Magnetic Feeder, Mounted On a Frame |
 |
|
4828 |
CONAIR/FRANKLIN 5 COMPONENT WEIGHT IN LOSS MATERIAL BLENDER, ONE 1.5" AUGER,
ONE 2" AUGER, TWO 3" AUGERS, ONE MISSING, 3 HP CENTRAL AUGER, EACH MATERIAL
HOPPER HOLDS APPROXIMATELY 150 LBS EACH, BLENDER DISCHARGES INTO A CONAIR
MATERIAL BIN THAT MEASURES 22" STRAIGHT SIDE X 16" SLOPING SIDE X 30" WIDE
AND 3O" DEEP, BIN HAS FOUR 3" VACUUM TAKE OFFS, BLENDED MATERIAL PASSES
THROUGH MAGNETIC DRAWER FROM BLENDER TO BIN, ALL MATERIAL BINS HAVE HIGH/LOW
BINDICATORS. UNIT IS COMPLETE WITH CONTROLS AND A SOLA POWER STABILIZATION
UNIT. THIS BLENDER CAN BE EXPANDED TO 8 COMPONENTS BY ADDING BINS AND
AUGERS, CONTROL PANEL SUPPORTS UP TO EIGHT COMPONENTS |
   |
Quotation Request Form
Click On Any Photo To Enlarge
|
