|
| |
Quotation Request Form
Click On Any Photo To Enlarge
|
Stock # |
Description |
Picture |
|
9059 |
1998 MODEL
YEAR STERLING
MODEL SE630D ACCUMULATOR HEAD BLOW MOLDER, TWO HEADS ON 42" CENTERS, 30 LB
HEAD SHOT CAPACITY 84" X 84" CLEAR PLATEN, 72" MAXIMUM & 16" MINIMUM
DAYLIGHT, 180 TON CLAMP FORCE, 6" EXTRUDER 24:1 L/D, 300 HP, BARBER COLEMAN
MACO 6500 100 PT
PARISON PROGRAMMER, SYSTEM INCLUDES - MAGUIRE 3
COMPONENT BLENDING SYSTEM, DRYER, HOPPER, HOPPER
& CYCLONE FOR MATERIAL HANDLING UNIT, GRANUTEC
TFG2530 100 HP GRANULATOR. UNIT RAN HDPE AND WAS UNDER POWER, APPROX FOOT
PRINT 30' X 40" X 24' TALL |
Photo
Gallery |
|
6452 |
IMPCO MODEL
B30-R180 TWIN HEAD BLOW MOLDING
MACHINE, S/N C4143, 3.75" SCREW DIAMETER, 20:1 L/D
CANTILEVERED CLAMP WITH 30" HORIZONTAL MOLD SPACE,
23" ADJUSTABLE CLAMP STROKE, 33 TON CLAMP FORCE,
10 CYCLES PER MINUTE, MOOG 25 POINT PROGRAMMER,
1988 MODEL YEAR |
      |
|
6337 |
FASTI INC.
MODEL BMB-III-B COMPRESSED AIR BLOW
MOLDING CHILLER, S/N F001120, 200 CFM MAXIMUM AIR FLOW, 230/3/60 OPERATION,
1.2 KW POWER CONSUMPTION, 8.5 MAXIMUM AMP DRAW, 200 PSI MAXIMUM
PRESSURE, 5.8 KW CHILLED WATER LOAD, 4.4 KW CONTINUOUS CHILLED WATER LOAD,
30 MINIMUM PSI COOLING WATER PRESSURE, 70 DEGREE MAXIMUM COOLING WATER
TEMPERATURE (TWO AVAILABLE) |
  |
|
6317 |
1998
STERLING MODEL EX500 DUAL 50 LB DOUBLE-DOUBLE CONFIGURATION BLOW MOLDER.
MOUNTED IN A SINGLE FRAMEWORK WITH A CENTRAL MICROPROCESSOR CONTROL SYSTEM
ARE (2) BLOW MOLDERS EACH WITH THE FOLLOWING: 6" 24/1 L/D EXTRUDER WITH 300
HP AC MOTOR AND INVERTER CONTROL. 50 LB. ACCUMULATOR HEAD, FIRST IN, FIRST
OUT MATERIAL FLOW. 180 TON CLAMP, 60" WIDE X 84" LONG CLEAR PLATENS, ROLL
OUT STYLE. PART TAKE-OUT MICROPROCESSOR CONTROL IS A MACO 6500 DESIGNED TO
OPERATE ON 102-132 VAC, 50/60 HERTZ, SINGLE PHASE POWER. INCLUDES DUAL
CHANNEL 100 POINT PARISON PROGRAMMER. CLAMP HAS 72" MAXIMUM OPEN DAYLIGHT,
16" CLOSED DAYLIGHT, VERTICAL PLATEN HEIGHT ADJUSTMENT PLUS +/- 4", SIDE TO
SIDE PLATEN ADJUSTMENT +/- 5", FRONT TO BACK PLATEN ADJUSTMENT +/- 5" |
Photo
Gallery |
|
6315 |
UNILOY
MODEL UA175-2H8 DUAL HEAD BLOW MOLDING
MACHINE, CONSISTS OF TWO 4.5" EXTRUDERS EACH WITH
A 25 LB SHOT HEAD, 88" X 62" CLAMP PLATENS, EACH
EXTRUDER IS DRIVEN BY A 200 HP SIEMENS DRIVE
PACKAGE, 36" ON CENTER BETWEEN BOTH HEADS,
INCLUDES PART TAKE-OUT AND A LOT OF MISC TOOLING MANUFACTURED 1997. |
           |
|
1563 |
FISCHER
MODEL FHB-054-1 BLOW MOLDER, S/N 2941, 3X85MM, PE, MACO VI CONTROLS, 1982
MODEL YEAR |
 |
|
4162 |
2 PART TEST MOLD, 20 OZ ROUND BOTTLE AND RECTANGULAR BOTTLE |
|
|
7264 |
BEKUM FLOW HEAD MODEL PK140, DUAL FLOW HEAD FOR KEUM H121 DUAL PARISON
|
|
|
8856 |
UNI-LOY MILK GALLON MOLD, S/N 809, MODEL 80122 |
 |
|
8857 |
UNI-LOY MILK GALLON MOLD, S/N 808, MODEL 80122 |
 |
|
8858 |
UNI-LOY WINDSHIELD WASHER GALLON MOLD, MODEL 889 |
 |
|
8859 |
UNI-LOY WINDSHIELD WASHER GALLON MOLD, MODEL 889 |
 |
|
8860 |
UNI-LOY GALLON PITCHER MOLD |
|
Quotation Request Form
Click On Any Photo To Enlarge
|
