|
| |
Quotation Request Form
Click On Any Photo To Enlarge
|
Stock # |
Description |
Picture |
|
6506 |
AMADAS (HOBBS) MODEL
239X8-1 FLAT CONVEYOR, S/N
A29200, 8" WIDE X 163" LONG BELT, 1 HP 230/460 VOLT 1735 RPM MOTOR THRU 10:1
GEARBOX, CHAIN AND SPROCKET DRIVE, NO STARTER OR CONTROLS |
  |
|
6559 |
AMADAS (HOBBS) MODEL
239X8-10 FLAT CONVEYOR, S/N A28560, 8" WIDE X 118 LONG RUBBER BELT, 1 HP
230/460 VOLT 1735 RPM MOTOR THRU 10:1 GEAR BOX, CHAIN AND SPROCKET DRIVE, NO
STARTER OR CONTROLS |
  |
|
6507 |
CARTER MANUFACTURING
FLAT CONVEYOR, 22" WIDE "V"
ROLLER GUIDED BELT 31 FEET LONG, 2 HP 208-230/460 VOLT MOTOR THRU 24.36:1
GEARBOX, CHAIN AND SPROCKET DRIVE, NO STARTER OR CONTROLS |
   |
|
6505 |
AMADAS (HOBBS)
CONVEYOR, 7" WIDE RUBBER BELT WITH 1" HIGH RUBBER CLEATS 7" ON CENTER 23
FEET LONG, 2 HP 208-230/460 VOLT MOTOR THRU 10:1 GEARBOX, CHAIN AND SPROCKET
DRIVE, NO STARTER OR CONTROLS |
  |
|
6323 |
Screw conveyor, enclosed tube, 304
stainless steel, horizontal. 12" diameter x 216" long screw. 12" x 12" end
top feed, 12" x 12" end bottom outlet. Driven by a 10 hp, 3/60/208-230/460
volt, 1755 rpm motor with a Falk reducer, ratio 9.357:1. O.A.D. 42"
Wide X 20' Long X 18" Tall |
   |
|
6332 |
TEC
CONVEYOR MODEL HI12-5-4, S/N 95-02-151, 12" WIDE BELT WITH 1" CLEATS ON 18"
CENTERS, 50" LONG ADJUSTABLE INCLINE SECTION, 68" LONG FLAT SECTION, MOUNTED
ON CASTERS, MINARIK DC VARIABLE SPEED CONTROLLER, CONVEYOR |
 |
|
6340 |
TEC
ADJUSTABLE HEIGHT INCLINE CONVEYOR, 24" WIDE X 10'4" BELT, 1/8 HP 90 VOLT DC
MOTOR INTO A BOSTON GEAR 60:1 GEARBOX, MOTOR-MASTER MODEL 20000 D/C VARIABLE
SPEED CONTROLS |
 |
|
6239 |
DYNAMIC
CONVEYOR CORPORATION (DYNA-CON) ADJUSTABLE
INCLINE CONVEYOR, S/N 12305, 4" WIDE X 98" LONG BELT, 36" PICKUP HEIGHT, 63"
DISCHARGE HEIGHT, PENTA DC VARIABLE SPEED CONTROLLER WITH REVERSE, REQUIRES
130 VOLT 1/8 HP MOTOR WHICH IS NOT INCLUDED |
 |
|
6242 |
DYNAMIC
CONVEYOR CORPORATION (DYNA-CON) ADJUSTABLE
HEIGHT INCLINE CONVEYOR, MODEL 04V6017LE, S/N 13199, 4" WIDE X 102" LONG
BELT, 36" HIGH PICKUP, 77" HIGH DISCHARGE, 130 VOLT 1/8 HP DC MOTOR, DC
VARIABLE SPEED CONTROL, MANUFACTURED 12/96 |
 |
|
6245 |
GARVEY
PORTABLE INCLINE CONVEYOR, STAINLESS STEEL
CONSTRUCTION, 10" WIDE X 9' LONG TEXTURED BELT,
APPROXIMATE 18" HIGH INFEED AND 6' HIGH DISCHARGE,
3/4 HP DC MOTOR INTO GEARBOX, DC VARIABLE SPEED
CONTROLLER |
 |
|
6247 |
DYNAMIC
CONVEYOR CORPORATION (DYNA-CON) ADJUSTABLE
INCLINE CONVEYOR, MODEL 04V27080R, S/N 20902701, 4" WIDE X 7' LONG BELT,
APPROXIMATE 3' HIGH INFEED AND 6' DISCHARGE, POWERED BY A 1/8 HP 130 VOLT DC
MOTOR WITH A DC VARIABLE SPEED CONTROLLER |
 |
|
5825 |
ROACH
CONVEYOR, S/N 366292, ADJUSTABLE INCLINE,
13" WIDE X 12 FOOT LONG DIAMOND PATTERN TEXTURED BELT,
POWERED BY A 1 HP 208-230/460 MOTOR INTO A 60:1
BOSTON GEAR CO GEARBOX, VERY NICE CONDITION |
 |
|
1579 |
RAPISTAN
MODEL A08802-00263, S/N 1300853-1830, 7' Overall With Flat Section Being 58"
Long x 17" Wide, 27" High, Incline Section 28" Long x 17" Wide With a
Discharge Height of 37" |
|
|
3448 |
EMI MODEL KK9324,
S/N 3448, Incline Conveyor - 8" Wide Belt With 1" Cleats Every 12". Incline
Begins At 55" From Front Of The Belt To A Height of 54". Unit Is On Casters
And Is Driven By A Baldor 1/3 HP 115/208-230 Volt Motor Into A "Boston" 700
Series Gearbox |
|
|
4450 |
5' Long x 6" Wide
Belt Home Made Conveyor, Unit Has 8" Wide Belt Capacity, Driven by 1/20 HP
Bodine Electric Variable Speed DC Motor and Controls
|
 |
|
4931 |
MOLDING AUTOMATION CONCEPTS, S/N MSCE-00117-0489, SMOOTH FINISH 9.5" WIDE
BELT 62" LONG, CHAIN DRIVEN BY A 1/4 HP MOTOR |
|
|
4932 |
MOLDING AUTOMATION CONCEPTS, S/N MSCE-00117-489S, 12" WIDE X 18.5" TEXTURED
BELT, INCLINABLE 45 DEGREES LEFT OR RIGHT, 1/15 HP DRIVE MOTOR
|
|
|
5354 |
NUMERIC CONVEYOR, 4
SECTIONS MOUNTED IN A COMMON FRAME 5HP MOTOR |
 |
Quotation Request Form
Click On Any Photo To Enlarge
|
