Array ( [0] => used-equipment [1] => extrusion-sheet-dies [2] => used-equipment [3] => extrusion-sheet-dies )
  • Stock#: 12063

    MASTERFLEX 5" HD SHEET DIE


    MASTERFLEX 5" HD SHEET DIE, JOB 2905-94, 1.5" OD MATERIAL ENTRY PORT, 275 LBS

  • Array ( [0] => extrusion-sheet-dies [1] => extrusion-sheet-dies )
  • Stock#: 16747

    USED 9″ EDI CAST FILM DIE


    EDI ULTRA FLEX H40 9″ CAST FILM DIE, S/N 11-30324, 354 LBS (DIE ONLY), .130 LIP OPENING WITH A 1.250″ LAND, SIX 480 VOLT HEATER ZONES @ 800 WATTS EACH, 1.000″ DIAMETER BOTTOM CENTER FEED, ALL FLOW SURFACES ARE CHROMED, INCLUDES DIE STAND, DESIGNED TO OPERATE IN VERTICAL POSITION

  • Array ( [0] => used-equipment [1] => extrusion-sheet-dies [2] => used-equipment [3] => extrusion-sheet-dies )
  • Stock#: 10872

    CLOEREN 12" 3 LAYER VANE DIE


    CLOEREN 12" 3 LAYER VANE DIE, S/N D.ND935-0103-01, JOB #91-935, MOUNTED ON CASTER STAND, THREE 1.5" MATERIAL ENTRIES ON CLOEREN 3 LAYER CO-EX BLOCK (A,B,C), JOB # D-935-2001-01, S/N E-3LSP-1636, .001 TO .040 LIP OPENING, FLAME HARDENED DIE LIP LANDS, 11 240/1/60 HEATER ZONES POWERED BY STAND ALONE 11 ZONE CONTROL PANEL/POWER SUPPLY USING EUROTHERM INSTRUMENTS DIGITAL CONTROLLERS, PANEL IS ALSO MOUNTED ON CASTERS

  • Array ( [0] => used-equipment [1] => extrusion-sheet-dies [2] => used-equipment [3] => extrusion-sheet-dies )
  • Stock#: 10322

    PRODUCTION COMPONENTS 20" PVC SIDING DIE


    PRODUCTION COMPONENTS 20" PVC SIDING DIE, S/N 6237-00, 20" DUAL MANIFOLD, 2" OD REAR PVC MATERIAL ENTRY, SIDE ACRYLIC MATERIAL ENTRY, .020-.060 ADJUSTABLE LIP OPENING, 9 HEATING ZONES OPERATING 240 VOLTS SINGLE PHASE, REBUILT BY ALLIED DIES INC IN MAY 2005, ALLIED S/N AD-1716-01 (6 AVAILABLE)

  • Array ( [0] => used-equipment [1] => extrusion-sheet-dies [2] => used-equipment [3] => extrusion-sheet-dies )
  • Stock#: 12064

    20" SHEET DIE


    20" SHEET DIE, S/N 397147, 1" OD MATERIAL ENTRY

  • Array ( [0] => used-equipment [1] => extrusion-sheet-dies [2] => used-equipment [3] => extrusion-sheet-dies )
  • Stock#: 2939

    EDI MODEL 3940221 24″ SHEET DIE


    EDI MODEL 3940221 24″ SHEET DIE, S/N 86-10048, AUTOFLEX H40, 240 VOLTS

  • Array ( [0] => extrusion-sheet-dies [1] => extrusion-sheet-dies )
  • Stock#: 16448

    USED 25″ EDI SHEET DIE


    EDI HD 25″ SHEET DIE, ELECTRICALLY HEATED, CENTER BACK FED, INCLUDES TWO SETS OF REPLACEABLE LIPS, .010-085 AND 085-.150

  • Array ( [0] => used-equipment [1] => extrusion-sheet-dies [2] => used-equipment [3] => extrusion-sheet-dies )
  • Stock#: 6667

    PRODUCTION COMPONENTS 25" HD-75 MASTERFLEX SHEET DIE


    PRODUCTION COMPONENTS 25″ HD-75 MASTERFLEX SHEET DIE, S/N 2175-92, .010-.085 LIP OPENING, 230 VOLTS 1.25″ DIAMETER REAR MATERIAL ENTRY, NICKEL PLATED FOR RUNNING PVC, MFG 10/92, 885 LBS

  • Array ( [0] => used-equipment [1] => extrusion-sheet-dies [2] => used-equipment [3] => extrusion-sheet-dies )
  • Stock#: 6671

    EDI 28.5" ULTRAFLEX H40 SHEET DIE


    EDI 28.5" ULTRAFLEX H40 SHEET DIE, S/N 89-12354, .001-.040 LIP OPENING, 240 VOLT 350 WATT HEATERS, 1.25" DIAMETER REAR MATERIAL ENTRY, NICKEL PLATED FOR RUNNING PVC, MFG 4/89, DIE ONLY 990 LBS, MOUNTED ON 41" CENTERLINE V-CASTER STAND

  • Array ( [0] => extrusion-sheet-dies [1] => extrusion-sheet-dies )
  • Stock#: 2376

    EDI ULTRAFLEX 29″ SHEET DIE


    EDI 29″ SHEET DIE, FLEX LIP, JOB 0.76.2241, ULTRAFLEX H-75, 3/4″ BACK CENTER FEED, 230 VOLTS, SINGLE PHASE, WITH DIE CART

  • Array ( [0] => used-equipment [1] => extrusion-sheet-dies [2] => used-equipment [3] => extrusion-sheet-dies )
  • Stock#: 3271

    EDI ULTRAFLEX 29″ SHEET DIE


    EDI 29″ SHEET DIE, S/N 85-9566, ULTRAFLEX H-40, 10 EACH 230 VOLT SINGLE ZONE HEATER ZONES

  • Array ( [0] => extrusion-sheet-dies [1] => extrusion-sheet-dies )
  • Stock#: 12061

    USED JOHNSON 31″ FLEX LIP SHEET DIE


    JOHNSON TITAN 31″ FLEX LIP DIE, S/N 03-24304-01, JOB NO. B2730, .001 TO .075 LIP OPENING, SIX 230 VOLT HEATER ZONES, 2 DECKELINGS, REBUILT BY EDI DIE CO IN 2003, RE-CHROMED, FLOW CHANNELS REDONE, AND RESTORED FLATNESS, DECKLED DOWN TO 22.5″, ALSO HAS 4.5″ REAR MATERIAL FEED ADAPTER

  • Array ( [0] => extrusion-sheet-dies [1] => extrusion-sheet-dies )
  • Stock#: 16978

    USED PRODUCTION COMPONENTS 35.5″ SHEET DIE


    ONE (1) USED EXTRUSION DIES/NORDSON SHEET DIE HAVING A 35.5” SLOT OPENING. UPPER FLEXIBLE LIP WITH MICRO ADJUSTMENT. FIXED LOWER LIP.  3/4″ OD BACK CENTER FEED. 230/1/60, LAST USED ON FLEXIBLE PVC. EXTREMELY CLEAN., INCLUDES STAINLESS STEEL DIE CART. S/N 83-7717. MFD 1983.

  • Array ( [0] => extrusion-sheet-dies [1] => extrusion-sheet-dies )
  • Stock#: 16974

    USED CLOEREN 35.5″ HD40 SHEET DIE


    ONE (1) USED CLOEREN/PRODUCTION COMPONENTS MODEL HD-40 SHEET DIE HAVING A 35.5″ SLOT OPENING. INTEGRAL UPPER FLEXIBLE LIP AND FIXED LOWER LIP. ADJUSTING BOLTS ON 1” CENTERS. 040 FLEX ADJUSTMENT. COAT HANGER MANIFOLD.  PRODUCTION COMPONENTS S/N 54703-0494. 7/8″ OD BACK CENTER FEED. LAST RAN FLEXIBLE PVC. EXTREMELY CLEAN. 230/1/60. 10.5 KW. WEIGHS 1074 POUNDS.  INCLUDES STAINLESS STEEL DIE CART

  • Array ( [0] => used-equipment [1] => extrusion-sheet-dies [2] => used-equipment [3] => extrusion-sheet-dies )
  • Stock#: 2859

    EDI 36″ SHEET DIE


    EDI 36″ SHEET DIE, S/N 859445, REBUILT, 230 VOLTS, 3/4″ BACK CENTER FEED, ON STAND

  • Array ( [0] => extrusion-sheet-dies [1] => extrusion-sheet-dies )
  • Stock#: 16641

    USED CLOEREN 36.5″ WIDE SHEET DIE


    CLOEREN HEAVY BODY SHEET DIE, S/N R13-0000-12, 36.5″ WIDE OPENING WITH AN ADJUSTABLE UPPER LIP AND A FIXED LOWER LIP, MICRO ADJUSTMENT ON UPPER LIP, 3/4″ BACK CENTER FEED, MISSING END PLATES, TWO ADJUSTING BOLTS, AND ELECTRICAL CONNECTORS, MANUFACTURED 1983, WEIGHS 1050 LBS, VERY CLEAN, LAST USED ON MEDICAL FLEXIBLE PVC

  • Array ( [0] => extrusion-sheet-dies [1] => extrusion-sheet-dies )
  • Stock#: 16976

    USED NORDSON 36.5″ SHEET DIE


    ONE (1) USED EXTRUSION DIES/NORDSON SHEET DIE HAVING A 36.5” SLOT OPENING. UPPER FLEXIBLE LIP WITH MICRO ADJUSTMENT. FIXED LOWER LIP. 3/4″ OD BACK CENTER FEED. 230/1/60. LAST USED ON FLEXIBLE PVC. EXTREMELY CLEAN., INCLUDES STAINLESS STEEL DIE CART. S/N 837718-2. MFD 1983

  • Array ( [0] => extrusion-sheet-dies [1] => extrusion-sheet-dies )
  • Stock#: 16977

    USED NORDSON 36.5″ SHEET DIE


    ONE (1) USED EXTRUSION DIES/NORDSON SHEET DIE HAVING A 36.5” SLOT OPENING. UPPER FLEXIBLE LIP. FIXED LOWER LIP. ADJUSTING BOLTS ON 1” CENTERS.  3/4″ OD BACK CENTER FEED. 230/1/60, LAST USED ON FLEXIBLE PVC. EXTREMELY CLEAN., INCLUDES STAINLESS STEEL DIE CART. S/N 814531. MFD 1981

  • Array ( [0] => extrusion-sheet-dies [1] => extrusion-sheet-dies )
  • Stock#: 16979

    USED NORDSON 36.5″ SHEET DIE


    ONE (1) USED EXTRUSION DIES/NORDSON SHEET DIE HAVING A 36.5” SLOT OPENING. UPPER FLEXIBLE LIP. FIXED LOWER LIP.  ADJUSTING BOLTS ON 1” CENTERS. 3/4″ OD BACK CENTER FEED. 230/1/60, LAST USED ON FLEXIBLE PVC. EXTREMELY CLEAN. INCLUDES STAINLESS STEEL DIE CART. SERIAL NUMBER S/N 81-4532. MFD 1981.

  • Array ( [0] => extrusion-sheet-dies [1] => extrusion-sheet-dies )
  • Stock#: 16975

    USED NORDSON H40 36.5″ WIDE SHEET DIE


    ONE (1) USED NORDSON MODEL H40 SHEET DIE HAVING A 36.5” SLOT OPENING. INTEGRAL UPPER FLEXIBLE LIP. FIXED LOWER LIP.  ADJUSTING BOLTS ON 1” CENTERS. .040 OF FLEX. 3/4″ OD BACK CENTER FEED. 230/1/60, LAST USED ON FLEXIBLE PVC. EXTREMELY CLEAN., INCLUDES STAINLESS STEEL DIE CART. S/N 13-33857. WEIGHS 816 POUNDS. MFD 2013