Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 16890

    USED CONAIR CW1836 GRANULATOR


    CONAIR MODEL CW1836 GRANULATOR, S/N RA-500.94884.001, 18″ X 36″ FEED THROAT, 3 KNIFE ROTOR, 2 BED KNIFE, 40 HP 230/460 VOLT 1775 RPM MOTOR, SUPER TANGENTIAL CUTTING CHAMBER, 6″ RIGHT HAND AIRVEYOR DISCHARGE, INSULATED TRAY FEED HOPPER, MOUNTED ON VIBRATION CONTROL PADS, 2007 MODEL YEAR, COMPLETE WITH STARTER AND CONTROLS FOR THE GRANULATOR AND A 5 HP BLOWER

  • Array ( [0] => just-arrived [1] => 35-60-hp-granulators [2] => feed-paddle-roll-granulators [3] => just-arrived [4] => 35-60-hp-granulators [5] => feed-paddle-roll-granulators )
  • Stock#: 16922

    USED CUMBERLAND 1456 FEED ROLL GRANULATOR


    CUMBERLAND MODEL 1456 GRANULATOR, S/N 84000-87011, 14″ X 56″ FEED THROAT, 3 KNIFE OPEN ROTOR, 2 BED KNIFE, 50 HP 230/460 VOLT 1175 RPM MOTOR, CONVEYOR FEED HOPPER WITH REAR MOUNTED 5″ DIAMETER X 56″ WIDE STEEL KNURLED FEED ROLLS, FEED ROLLS HAVE PNEUMATIC PINCH AND ARE POWERED BY A 1.5 HP 208-230/460 VOLT 1140 RPM MOTOR THRU A 40:1 GEARBOX AND CHAIN & SPROCKET DRIVE SYSTEM, GEARBOX IS RATED FOR A MAXIMUM OF 1.85 HP AND HAS AN OUTPUT TORQUE OF 2080 LBS PER INCH, CHAMBER IS MOUNTED TO A LOW PROFILE PLATE BASE ON VIBRATION CONTROL PADS, 10″ OD AIRVEYOR DISCHARGE, INCLUDES PNEUMATIC AIR VALVE CONTROL SYSTEM FOR THE FEED ROLLS, OVERALL DIMENSIONS ARE 10′ X 80″ X 100″, APPROXIMATELY 10,000 LBS, STARTER AND CONTROLS FOR THE GRANULATOR ARE NOT INCLUDED

  • Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 16907

    USED CUMBERLAND 1836 GRANULATOR


    CUMBERLAND MODEL 1836 GRANULATOR, S/N 36500-92034, 18″ X 36″ FEED THROAT, 3 KNIFE OPEN ROTOR, 2 BED KNIFE, TANGENTIAL CUTTING CHAMBER, DUAL FLY WHEEL, 40 HP 460 VOLT MOTOR, INSULATED TRAY FEED HOPPER AND BODY PANELS, 8″ RIGHT HAND AIRVEYOR DISCHARGE, MOUNTED ON FORK LIFT RAIL BASE, COMPLETE WITH STARTER AND CONTROLS

  • Array ( [0] => just-arrived [1] => 35-60-hp-granulators [2] => feed-paddle-roll-granulators [3] => just-arrived [4] => 35-60-hp-granulators [5] => feed-paddle-roll-granulators )
  • Stock#: 16836

    USED RAPID 500/120 FEED ROLL GRANULATOR


    RAPID MODEL 500-120 KURF GRANULATOR WITH FEED ROLLS, S/N RA 511.246815.20.1, 18″ X 48″ FEED THROAT, 5 KNIFE OPEN ROTOR, 3 BED KNIFE, TANGENTIAL CUTTING CHAMBER, 50 HP 460 VOLT MOTOR, 6″ LEFT HAND AIRVEYOR DISCHARGE, 8mm HOLES SCREENS INSTALLED, INSULATED HOPPER WITH REAR MOUNTED 1200mm WIDE KNURLED STEEL FEED ROLLS WITH DANCER BAR, FEED ROLLS HAVE PNEUMATIC PINCH, HOPPER HAS ELECTRIC POWER BACK JACK ASSIST, INCLUDES ORIGINAL OEM STARTER PANEL WITH ALLEN BRADLEY SOFT STARTER FOR THE GRANULATOR AND A VARIABLE SPEED DRIVE (8-45 METERS/MIN LINE SPEED) (26 – 147 FEET/MIN LINE SPEED) FOR THE FEED ROLLS, REMOTE KEYPAD CONTROL FOR THE FEED ROLLS MOUNTED ON STARTER DOOR, 2015 MODEL YEAR WITH LOW USE AND IS IN EXCELLENT RUNNING CONDITION

  • Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 16734

    USED NELMOR G1820M GRANULATOR


    NELMOR MODEL G1820M GRANULATOR, S/N 7910-13431, 18″ X 20″ FEED THROAT, 3 KNIFE SOLID ROTOR, 2 BED KNIFE, 40 HP 230/460 VOLT MOTOR, INSULATED BODY PANELS AND HOPPER, TRAY AND TOP CONVEYOR FEED HOPPER, LEFT HAND 6″ AIRVEYOR DISCHARGE, FORKLIFT BASE, COMPLETE WITH STARTER AND CONTROLS

  • Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 16550

    USED RAPID 1224C GRANULATOR


    RAPID MODEL 1224C GRANULATOR, S/N 60.521, 12″ X 24″ FEED THROAT, 3 KNIFE OPEN ROTOR, 2 BED KNIFE, 40 HP 230/460 VOLT MOTOR – WIRED 460V, TANGENTIAL CUTTING CHAMBER, TRAY FEED HOPPER, MOUNTED ON FRAME BASE WITH CASTERS, 6″ OK160 AIRVEYOR DISCHARGE, COMPLETE WITH 460 VOLT STARTER AND CONTROLS FOR THE GRANULATOR AND A BLOWER, 1995 MODEL YEAR

  • Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 3383

    GLOUCESTER 1225 GRANUALATOR


    GLOUCESTER MODEL 1225, 12″ X 25″ FEED THROAT, 5 KNIFE OPEN ROTOR, 2 BED KNIFE, 40 HP 230/460 VOLT MOTOR

  • Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 16507

    USED CUMBERLAND 1426i GRANULATOR


    CUMBERLAND MODEL 1426i GRANULATOR, S/N 291315-96009, 14″ X 26″ FEED THROAT, 3 KNIFE TWIN SHEAR ROTOR, 2 BED KNIFE, DUAL FLYWHEEL, 50 HP 460 VOLT MOTOR, INSULATED TRAY FEED HOPPER WITH 8″ ID LEFT HAND PIPE CHUTE, GRAVITY DISCHARGED ON 66″ X 60″ X 51″ STAND WITH 47.125″ BOX CLEARANCE, INCLUDES SIZE 3 STARTER AND CONTROLS

  • Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 14291

    CUMBERLAND 684 GRANULATOR


    CUMBERLAND MODEL 684 GRANULATOR, S/N 91000-92027, 14″ X 26″ FEED THROAT, 3 KNIFE OPEN ROTOR, 2 BED KNIFE, 40 HP 460 VOLT MOTOR, LEFT HAND TRAY SIDE FEED HOPPER, 5″ OD LEFT HAND AIRVEYOR DISCHARGE, FORKLIFT BASE, COMPLETE WITH OEM STARTER AND CONTROLS

  • Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 12926

    CUMBERLAND 684 GRANULATOR


    CUMBERLAND MODEL 684 GRANULATOR, S/N 91000-87004, 14″ X 26″ FEED THROAT, 3 KNIFE OPEN CHEVRON CUT ROTOR, 2 BED KNIFE, 40 HP 460 VOLT MOTOR, INSULATED TRAY FEED HOPPER, 6″ AIRVEYOR DISCHARGE, FORK LIFT STYLE BASE, COMPLETE WITH STARTER AND CONTROLS (4 AVAILABLE)

  • Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 10469

    CUMBERLAND 684 GRANULATOR


    CUMBERLAND MODEL 684 GRANULATOR, S/N 291650-7935, 14″ X 26″ FEED THROAT, 3 KNIFE TWIN SHEAR ROTOR, 2 BED KNIFE, 30 HP 230/460 VOLT MOTOR, TRAY FEED HOPPER, 5″ LEFT HAND AIRVEYOR DISCHARGE, ON CASTERS, COMPLETE WITH STARTER AND CONTROLS (3 AVAILABLE)

  • Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 14567

    WHITAKER 360B (CUMBERLAND 1426i) GRANULATOR


    WHITAKER MODEL 360B (CUMBERLAND 1426i) GRANULATOR, S/N 491546-92004, 14″ X 26″ FEED THROAT, 3 KNIFE SCOOPED TWIN SHEAR ROTOR, 2 BED KNIFE, 60 HP 460 VOLT MOTOR, DUAL FLY-WHEEL, 6″ LEFT HAND AIRVEYOR DISCHARGE, INSULATED TRAY FEED HOPPER, FORKLIFT BASE, STARTER AND CONTROLS NOT INCLUDED

  • Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 12253

    CUMBERLAND 1456I GRANULATOR


    CUMBERLAND MODEL 1456I GRANULATOR, S/N 84000-782, 14″ X 56″ FEED THROAT, 6 KNIFE STAGGERED ROTOR, 2 BED KNIFE, 50 HP 230/460 VOLT MOTOR, STANDARD OEM STYLE TRAY OR CONVEYOR HOPPER, 8″ AIRVEYOR DISCHARGE, MOUNTED ON 42″ TALL LEG BASE, STARTER AND CONTROLS NOT INCLUDED

  • Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 16579

    USED CUMBERLAND 1524B GRANULATOR


    CUMBERLAND MODEL 1524B GRANULATOR, S/N NONE, 15″ X 24″ FEED THROAT, NEW 3 KNIFE HIGH SHEAR ROTOR, 2 BED KNIFE, 50 HP 230/460 VOLT MOTOR, TRAY FEED HOPPER, MOUNTED TO A 53″ TALL X 65″ WIDE X 69″ DEEP GAYLORD GRAVITY DISCHARGE BASE, INCLUDES ACROSS THE LINE STARTER AND CONTROLS

  • Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 14640

    CUMBERLAND 1524B GRANULATOR


    CUMBERLAND MODEL 1524B GRANULATOR, S/N 58500-7334, 15″ X 24″ FEED THROAT, 3 KNIFE STEEP ANGLE ROTOR, 2 BED KNIFE, 60 HP 230/460 VOLT 1770 RPM MOTOR, CONVEYOR FEED HOPPER, 6″ AIRVEYOR DISCHARGE, MOUNTED ON A 21″ HIGH X 52″ WIDE X 77 DEEP PLATE LEG BASE, STARTER AND CONTROLS NOT INCLUDED

  • Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 5816

    CUMBERLAND 1524B GRANULATOR


    CUMBERLAND MODEL 1524B GRANULATOR, S/N 58500-7035, 15″ X 24″ FEED THROAT, NEW 3 KNIFE HIGH SHEAR ROTOR, 2 BED KNIFE, 50 HP 460 VOLT MOTOR, CONVEYOR FEED HOPPER, MOUNTED ON 54″ TALL GAYLORD DISCHARGE BASE, INCLUDES STARTER IN EXPLOSION PROOF PANEL AND DISCONNECT

  • Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 16385

    USED POLYMER 1624 GRANULATOR


    POLYMER MODEL 1624 GRANULATOR, 16″ X 24″ FEED THROAT, 2 KNIFE ROTOR, 2 BED KNIFE, 40 HP 460 VOLT MOTOR, INSULATED TRAY FEED HOPPER, 2 HP RIGHT HAND SIDE MOUNTED BLOWER DISCHARGE WITH 4″ OD OUTLET, MOUNTED ON CASTERS, COMPLETE WITH STARTER AND CONTROLS

  • Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 12835

    NELMOR G1628 GRANULATOR


    NELMOR MODEL G1628 GRANULATOR, NO S/N, 16″ X 28″ FEED THROAT, 3 KNIFE SOLID ROTOR, 2 BED KNIFE, 40 HP 230/460 VOLT MOTOR, SPLIT CHAMBER JACK BACK DESIGN, NO IN-FEED HOPPER, GRAVITY DISCHARGE OVER HOME MADE GAYLORD HEIGHT STAND, NO STARTER OR CONTROLS

  • Array ( [0] => 35-60-hp-granulators [1] => as-is-granulators-30-hp [2] => 35-60-hp-granulators [3] => as-is-granulators-30-hp )
  • Stock#: 16099

    CUMBERLAND 1628X GRANULATOR


    CUMBERLAND MODEL 1628X GRANULATOR, S/N CA083050-05025, 16″ X 28″ FEED THROAT, 3 KNIFE ROTOR, 2 BED KNIFE, 40 HP 460 VOLT MOTOR, DUAL FLY WHEEL, INSULATED TRAY/CONVEYOR COMBINATION IN-FEED HOPPER, 6″ AIRVEYOR DISCHARGE, WITH STARTER AND CONTROLS

  • Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 14545

    CUMBERLAND 1628X GRANULATOR


    CUMBERLAND MODEL 1628X GRANULATOR, S/N CAO83050-03001, 16″ X 28″ FEED THROAT, 5 KNIFE SLANT CUT OPEN ROTOR, 2 BED KNIFE, 40 HP 460 VOLT MOTOR, DUAL FLYWHEEL, INSULATED TRAY/CONVEYOR COMBINATION HOPPER, 6″ RIGHT HAND AIRVEYOR DISCHARGE, ON MOUNTING PADS, COMPLETE WITH STARTER AND CONTROLS