Array ( [0] => lab-testing-equipment [1] => pelletizers [2] => lab-testing-equipment [3] => pelletizers )
  • Stock#: 16911

    USED SHEAR BAY BT2.5 PELLETIZER AND BATH


    SCHEER BAY MODEL BT25 STRAND PELLETIZER, S/N BT25TS-0502 AND UNITIZED STAINLESS STEEL WATER TROUGH MEASURING 6″ X 6″ X 72″. BOTH MANUFACTURED IN 2005

  • Array ( [0] => just-arrived [1] => extruders-twin-screw [2] => pelletizers [3] => pelletizing-lines [4] => just-arrived [5] => extruders-twin-screw [6] => pelletizers [7] => pelletizing-lines )
  • Stock#: 16811

    USED 27mm LEISTRITZ / CONAIR PELLETIZING LINE


    LEISTRITZ / CONAIR PELLETIZING LINE CONSISTING OF ONE 27mm LEISTRITZ MODEL 27GL-40D CO-ROTATING TWIN EXTRUDER WITH SIDE FEEDER, OPERATOR / TEMPERATURE CONTROL PANEL, INCLUDES STRAND DIE, CONAIR MODE 304 PELLETIZER, SPARE SCREW SHAFT & ELEMENTS, REPORTED TO HAVE 728 HOUR USE

  • Array ( [0] => pelletizers [1] => pelletizers )
  • Stock#: 16775

    USED CONAIR 304 PELLETIZER


    CONAIR MODEL 304 PELLETIZER, S/N ACG4124, 2003 MODEL YEAR, 14 KNIFE BOLT ON ROTOR, 1 BED KNIFE, V-BELT DRIVEN BY A 2 HP 190/380 VOLT MOTOR, 230 VOLT POWER INPUT, DELTA VARIABLE SPEED CONTROLLER, RUBBER TOP ROLL AND STEEL KNURLED BOTTOM ROLL

  • Array ( [0] => pelletizers [1] => pelletizers )
  • Stock#: 16753

    USED CUMBERLAND 20-85 PELLETIZER


    CUMBERLAND MODEL 20-85 PELLETIZER, S/N 55950-747, BELT DRIVEN 24 KNIFE BOLT ON ROTOR, 25 HP D/C MOTOR WITH ABB VARIABLE SPEED DRIVE, INCLUDES AIR KNIFE BLOWER

  • Array ( [0] => pelletizers [1] => pelletizers )
  • Stock#: 16793

    USED CUMBERLAND 8″ 36 KNIFE PELLETIZER


    8″ CUMBERLAND STRAND PELLETIZER, S/N 64650-742, EQUIPPED WITH 36-KNIFE HELICAL ROTOR, INCLUDES FREE STANDING OPERATOR CONTROL, DRIVEN BY 10 HP DC MOTOR, HAS SPRING LOADED NIP ROLL ASSEMBLY

  • Array ( [0] => just-arrived [1] => pelletizers [2] => pelletizing-lines [3] => just-arrived [4] => pelletizers [5] => pelletizing-lines )
  • Stock#: 16563

    USED 6″ EXTRUSION PELLETIZING LINE


    PELLETIZING LINE CONSISTING OF:

    ONE (1) USED 6″ 30/1 PRODEX MODEL TM-600-30 EXTRUDER HAVING A SIX(6) ZONE ELECTRICALLY HEATED, WATER COOLED(CLOSED LOOP) AND SIDE VENTED BARREL AT APPROXIMATELY A 42″CENTERLINE. INCLUDES 3 HP VACUUM WATER CENTRIFUGAL VACUUM PUMP FOR VENT. UNIT HAS PRODEX/LUFKIN MODEL TMH-60A-315 CHANGE GEAR BOX WITH 10.4:1 GEARS INSTALLED. GEARBOX IS DIRECT DRIVEN BY A 400 HP EMERSON DC MOTOR WITH ABB MODEL DCS-800 DIGITAL SCR CONTROL. 400 HP DC MOTOR WAS CLEANED AND BAKED IN 2017. STAND ALONE TEMPERATURE CONTROL PANEL WITH 12-ZONES DIGITAL CONTROLLERS SET UP FOR SIX (6) BARREL, THREE (3) SCREEN CHANGER AND TWO (2) DIE ZONES. EXTRUDER IS SET UP FOR A CRAMMER FEEDER AND INCLUDES ADAPTER. PRODEX CRAMMER FEED IS AVAILABLE AT ADDITIONAL COST.

    ONE (1) USED XALOY MODEL EH-80 SLIDE PLATE SCREEN CHANGER HAVING TWO (2) NOMINAL 8″ DIAMETER BREAKER PLATES WITH MODEL HPU-50 5 HP HYDRAULIC PUMP POWER PACK AND CONTROLS. MANUFACTURED 2008, SCREEN CHANGER SERIAL NUMBER EH80059.

    3) BERINGER MODEL WRP12 WATER RING PELLETIZING SYSTEM WITH 3-HP CUTTING HEAD, 5 HP CENTRIFUGAL DRYER, AND TEMPERED WATER RECIRCULATION SYSTEM WITH 5 HP PUMP.

    LAST USED ON PP AND PE AT 800-9-LBS AN HR / LAST USED ON HDPE AT 1200 POUNDS AN HOUR.

  • Array ( [0] => pelletizers [1] => pelletizers )
  • Stock#: 16431

    USED CUMBERLAND #6 PELLETIZER


    CUMBERLAND MODEL 6 PELLETIZER, S/N 28111-6363, 8 KNIFE BOLT ON ROTOR, 5 HP 208-230/460 VOLT MOTOR, A/C VARY DRIVE, WITH STARTER AND CONTROLS

  • Array ( [0] => pelletizers [1] => pelletizing-lines [2] => recycling [3] => pelletizers [4] => pelletizing-lines [5] => recycling )
  • Stock#: 16115

    USED EREMA KAG800/63 LDPE/LLDPE FILM RECLAIM LINE


    USED EREMA MODEL KAG800/63 LDPE/LLDPE FILM RECLAIM LINE CONSISTING OF THE FOLLOWING:

    A. MODEL 5000/600 INCLINED, CLEATED CONVEYOR MEASURING 23.6”WIDE X 16.4’ LONG WITH MODEL DLS 840/600/400 METAL DETECTOR.

    B. 800MM (31”) DIAMETER INTEGRAL DENSIFIER/AGGLOMERATOR WITH 40 HP DRIVE, INFEED HOPPER WITH CONVEYOR AND PULL ROLL FEED AND
    SAS1500 MOISTURE/FINES REMOVAL SYSTEM

    C. 63 MM 7/1 L/D RATIO, AIR COOLED EXTRUDER WITH 20 HP AC MOTOR WITH INVERTOR AND CONTROL PANEL FOR THE ENTIRE SYSTEM. SERIAL NUMBER P04/172

    D. MODEL HGL HOT CUT PELLETIZER WITH PELLET COOLING BLOWER AND CYCLONE

    E. LINE MANUFACTURED 2005. RATED TO ABOUT 400 POUNDS AN HOUR

  • Array ( [0] => pelletizers [1] => pelletizers )
  • Stock#: 16148

    CUMBERLAND #8 PELLETIZER


    CUMBERLAND #8 PELLETIZER, S/N 64050-7033, 8 KNIFE BOLT ON ROTOR, 15 HP AC MOTOR, 460/3/60 OPERATION, 54″ INFEED HEIGHT, 35″ DISCHARGE HEIGHT, MOUNTED ON CASTERS, 57″ L X 57″ W X 74″ H

  • Array ( [0] => used-equipment [1] => pelletizers [2] => used-equipment [3] => pelletizers )
  • Stock#: 12962

    CUMBERLAND MODEL QUIETIZER 20" PELLETIZER


    CUMBERLAND MODEL QUIETIZER 20" PELLETIZER, S/N 255200-B-773, HYPALON ROLLS, BELT DRIVEN 48 KNIFE HELICAL ROTOR VIA 10 HP 460 VOLT MOTOR, INCLUDES A/C VARIABLE SPEED DRIVE UNIT

  • Array ( [0] => used-equipment [1] => pelletizers [2] => used-equipment [3] => pelletizers )
  • Stock#: 12960

    CUMBERLAND MODEL 20 PELLETIZER


    CUMBERLAND MODEL 20 PELLETIZER, NO S/N, 36 KNIFE HELICAL ROTOR, HYPALON ROLLS, 15 HP 460 VOLT MOTOR THRU MANUAL VARI-DRIVE, NO CONTROLS

  • Array ( [0] => used-equipment [1] => pelletizers [2] => used-equipment [3] => pelletizers )
  • Stock#: 12959

    CUMBERLAND MODEL 20 PELLETIZER


    CUMBERLAND MODEL 20 PELLETIZER, NO S/N, 36 KNIFE HELICAL ROTOR, HYPALON ROLLS, 15 HP 460 VOLT MOTOR THRU MANUAL VARI-DRIVE, NO CONTROLS

  • Array ( [0] => used-equipment [1] => pelletizers [2] => used-equipment [3] => pelletizers )
  • Stock#: 12958

    CUMBERLAND MODEL 20 PELLETIZER


    CUMBERLAND MODEL 20 PELLETIZER, S/N 55000-678, 48 KNIFE HELICAL ROTOR, HYPALON ROLLS, 15 HP 460 VOLT MOTOR THRU MANUAL VARI-DRIVE, NO CONTROLS

  • Array ( [0] => used-equipment [1] => pelletizers [2] => used-equipment [3] => pelletizers )
  • Stock#: 12957

    CUMBERLAND MODEL 20 PELLETIZER


    CUMBERLAND MODEL 20 PELLETIZER, NO S/N, HYPALON ROLLS, 60 KNIFE HELICAL ROTOR, 15 HP 460 VOLT MOTOR THRU MANUAL VARI-DRIVE, NO CONTROLS

  • Array ( [0] => used-equipment [1] => pelletizers [2] => used-equipment [3] => pelletizers )
  • Stock#: 14588

    CONAIR MODEL 3512GP LONG FIBER PELLETIZER


    CONAIR MODEL 3512GP LONG FIBER PELLETIZER, S/N 12-121195GP, 6 KNIFE 12" WIDE X 12" OD ROTOR, POWERED BY A 15 HP 500 VOLT D/C MOTOR, 480/3/60 INPUT POWER (2 SPARE ROTORS WITH KNIVES ALSO AVAILABLE, STOCK NO’S 14592 & 14593)

  • Array ( [0] => used-equipment [1] => pelletizers [2] => used-equipment [3] => pelletizers )
  • Stock#: 14589

    SCHEER BAY COMPANY MODEL B20-P LONG FIBER PELLETIZER


    SCHEER BAY COMPANY MODEL B20-P LONG FIBER PELLETIZER, S/N B20P-0103, 20" WIDE ANGLE CUT 6 KNIFE ROTOR (TWO 10" WIDE KNIVES PER POSITION), 460/3/60 OPERATION, COMPLETE WITH CONTROL STAND ALONE CONTROL PANEL (SPARE ROTOR WITH KNIVES ALSO AVAILABLE, STOCK NO. 14594)

  • Array ( [0] => used-equipment [1] => pelletizers [2] => used-equipment [3] => pelletizers )
  • Stock#: 14844

    BERLYN MODEL PELL-2 PELLETIZER


    BERLYN MODEL PELL-2 PELLETIZER, S/N 043C927, 1/3 HP 115/208-230 VOLT SINGLE PHASE MOTOR, 2" WIDE 4 BLADE ROTOR, WIRED 230/1/60