|
| |
Quotation Request Form
Click On Any Photo To Enlarge
|
Stock # |
Description |
Picture |
| 10252 |
EGAN
POWERLIGHT 3.5"
EXTRUDER, S/N F00422601, 75 HP 1750 RPM MOTOR, 460 VOLT OPERATION, 24:1 L/D, 7 ZONE NON-VENTED BARREL, 16.93:1
GEARBOX, EUROTHERM 590 SERIES SCR DRIVE, BARBER-COLMAN DIGITAL TEMPERATURE
CONTROLS, INCLUDES MOVACOLOR SYNCHRONIC MODEL MC-16 II DIGITAL FEEDING/MIXING STATION |
     |
| 6853 |
MAAG PUMP
SYSTEMS MODEL THERMOREX 56/56 MELT PUMP, S/N 819.28178, 1000 PPH CAPACITY,
300 F TEMP, SG .98, 1500-2500 PAS VISCOSITY, 1100 PSI SUCTION, 4300 PSI
DISCHARGE, CLOCKWISE ROTATION, 15 HP 230/460 BALDOR INVERTER DRIVE MOTOR
INTO 18:1 GEARBOX WITH 10,070 LBS OUTPUT TORQUE, MOUNTED ON ADJUSTABLE
HEIGHT CASTER STAND, MAAG SO# 60260 |
 |
|
5881 |
JOHNSON 3.5"
EXTRUDER, 24:1 L/D, 100 HP 1760 RPM D/C MOTOR, BELT DRIVEN KOELLMANN 14:1
GEARBOX, 4 ZONE AIR COOLED NON-VENTED BARREL, FREE STANDING DOUBLE SIDED
CONTROL PANEL CONTAINS EUROTHERM 808 DIGITAL TEMPERATURE CONTROLS FOR 4
BARREL ZONES, 3 DIE ZONES, MELT TEMPERATURE & PRESSURE GAUGES |
   |
|
3219 |
3.5" WELEX
Model 350-30, S/N 262, 30:1 L/D, Lufkin Gear Box 7.76:1 Ratio With Heat
Exchanger, 10 Zones - 5 Barrel, 1 Adaptor, 4 Die With BC-580 Controls,
Non-Vented Barrel With 50" Center Line, 5" x 5.5" Feed Throat, Panel Has
Spectrum III SCR Drive Rated For 100 HP @ 500 Volts |
  |
| 3846 |
DAVIS STANDARD 3.5"
MODEL 35IN35, S/N 790, 30:1 L/D, 5 Zones Electrically Heated, Water Cooled
(closed loop), Vented & Plugged Barrel At A 72" Center Line. 11.8:1 Gear
Box Rated @ 158 HP With A 1.25 Service Factor, Direct Drive In A Wrap Around
Manner By 150 HP GE Motor, 4.5" x 6" Feed Throat, 1993 Model Year, Last Used
on PS - Very Clean Unit, No Controls or SCR |
  |
| 5661 |
JOHNSON 3.5" SINGLE
SCREW EXTRUDER, S/N 6372, 24:1 L/D, ELECTRICALLY HEATED AIR COOLED FOUR ZONE
TOP VENTED BARREL, WATER COOLED FEED THROAT, NO HOPPER, DRIVEN BY A 200 HP
DC MOTOR THRU A 17.14:1 GEARBOX, APPROXIMATE 41.5" CENTERLINE, INCLUDES
CONTROL PANEL WITH EUROTHERM MODEL 94 DIGITAL TEMPERATURE CONTROLLERS, G.E.
SILCON VI DRIVE AND A 30 KVA TRANSFORMER. OVERALL DIMENSIONS ARE 7'W X 16'L
X 5'T, (2) PANELS ARE 2'W X 4'L X 7'T EACH |
   |
| 5716 |
DAVIS STANDARD MODEL
450H 4.5" EXTRUDER, S/N G8733, SO# 92671-C, 34:1 L/D, ELECTRICALLY HEATED
AIR COOLED NON-VENTED BARREL, BELT DRIVE, 150 HP 1750/2000 RPM DC MOTOR INTO
A 17.21:1 GEARBOX WITH A RATING OF 147 HP AT A SERVICE FACTOR OF 1.5 @ 100
RPM SCREW SPEED, TEMPERATURE CONTROL PANEL HAS EUROTHERM MODEL 808 DIGITAL
CONTROLS, FINCOR SCR DRIVE UNIT, EXTRUDER INCLUDES 3 PIECE CLAMP AND
ADDITIVE FEEDER |
  |
| 5717 |
DAVIS STANDARD MODEL
45T 4.5" EXTRUDER, S/N E766,
SO# 129860, 24:1 L/D, ELECTRICALLY HEATED AIR COOLED NON-VENTED BARREL, 150
HP DC MOTOR WITH BELT DRIVE, INCLUDES SCR DRIVE UNIT, HOPPER, AEC COLOR
FEEDER, AND TEMPERATURE CONTROL PANEL |
   |
Quotation Request Form
Click On Any Photo To Enlarge
|
