|
| |
Quotation
Request Form Click on Photo To Enlarge
|
Stock # |
Model |
Picture |
|
10256 |
WHITLOCK MODEL 306
DOUBLE RIBBON MIXER, S/N 7330400, 10 HP 460 VOLT ONLY MOTOR, CARBON STEEL
NON-JACKETED 30 X 36 X 72" BOWL, 50 CUBIC FOOT CAPACITY, 8" OD END DISCHARGE
WITH BUTTERFLY VALVE, MOUNTS TO 151" X 74" MEZZANINE WORK STAND |
   |
|
6915 |
GELIMAT COMPOUNDER, 10 LITER NOMINAL VOLUME (10" X 14" MIXING AREA), 8 LB
BATCH SIZE, 75 HP 230/460 VOLT 1180 RPM MOTOR, DIRECT FEED TOP HOPPER,
DIRECT DRIVE WITH CLUTCH BRAKE SYSTEM |
   |
|
10029 |
LAB GELIMAT, HIGH
SHEAR, FLUSH MOUNTED, JACKETED
BODY, 25 HP 230/460 VOLT MOTOR DRIVEN BY A YASAKAWA MODEL E7 VARIABLE SPEED
INVERTER, MANUALLY OPERATED, AIR ASSISTED LOAD AND DISCHARGE DOOR |
|
|
6759 |
Double Spiral Ribbon
Blender, 80 Cubic Feet, 304 Stainless Steel, Non-Jacketed Trough 40" Wide x
103" Long x Approximately 40" Deep, 5" Diameter Shaft, 6" End Butterfly
Discharge, and 8" x 8" Slide Plate Discharge, Driven by a 25hp Motor,
3/60/230/460 volt, 1750 rpm, Falk Gear Box, Size 40DU, 9.7 Ratio, Chain
Reduction Approx 3/1, Mounted on Carbon Steel Stands. |
    |
|
6569 |
FARREL/BANBURY MODEL
F80 INTENSIVE MIXER, S/N 996091, MIXING CHAMBER HAS AN 80 LITER NET VOLUME
CAPACITY AND IS RATED FOR APPROXIMATELY 132 LB (60 KGS) BATCH, CHAMBER HAS
FOUR WING ROTOR, FYH DUST STOPS, ROLLER BEARINGS AND FLOATING WEIGHT RAM
WITH 16" CYLINDER AND 12" NECK EXTENSION, DRIVEN BY A 400 HP DC MOTOR WITH
SCR THROUGH A LUFKIN GEAR REDUCER. INCLUDES LUBE SYSTEM, TEMPERATURE
CONTROL, ALLEN BRADLEY 1000 MICROPROCESSOR CONTROL, 2000 MODEL YEAR |
    |
|
6658 |
16 CUBIC FOOT STAINLESS
STEEL BOWL RIBBON MIXER, 47.5" X 24" X 28" DEEP BOWL, 5 HP 460 VOLT DIRECT
DRIVE MOTOR, 6" X 6" CENTER DISCHARGE OPENING, RUN, JOG, FORWARD, REVERSE
CONTROLS, 77" X 35" FOOTPRINT |
  |
|
5892 |
ENSIGN EQUIPMENT MODEL
60-6200 VERTICAL BATCH MIXER, S/N 4043, 60 CUBIC FOOT MIXING CAPACITY, 2000
LBS/HOUR APPROXIMATE OUTPUT, DOUBLE HINGED COVERS, 6" AGITATOR AUGER, TWO
WAY FORKLIFT CHANNELS, 30 MINUTE CYCLE TIMER, DIRECT GEAR UNIT POWERED BY A
2 HP DIRECT DRIVE MOTOR. INCLUDES 3 HP 5" OD x 17' POWER AUGER ON NBE
FLO-THRU MATERIAL BIN |
   |
|
5374 |
AMK MIXER EXTRUDER MODEL VIV-4, S/N 12202, 2.5" DISCHARGE SCREW, 208 VOLT
OPERATION @ 60 HZ, SIGMA JACKETED STAINLESS STEEL TANGENTIAL BOWL WITH ONE
GALLON WORKING CAPACITY, APPROXIMATELY 1.9 GALLONS TOTAL CAPACITY, BOWL
DIMENSIONS ARE 7.75" FRONT TO BACK, 7.75" LEFT TO RIGHT, AND 7" DEEP, SITE
GLASS, SAFETY GRID LID INCLUDING VACUUM COVER, UNIT COMES COMPLETE WITH
UNITIZED 110 VOLT CONTROL PANEL, 1985 MODEL YEAR, GOOD CONDITION |
    |
|
3854 |
LITTLEFORD K1200, 43.2 CUBIC FEET CAPACITY AND 26 CUBIC FEET WORKING
CAPACITY, INTERIOR BOWL IS MANUFACTURED OF STAINLESS STEEL AND IS JACKETED
FOR HEATING OR COOLING APPLICATIONS. MIXING BLADES ARE DRIVEN BY A 25 HP
MOTOR, BOTTOM AUGER DISCHARGE. |
 |
|
4119 |
GUNTHER PAMPENMEIER TSEH/KMHO, MAIN MIXER 20" DIAMETER X 26" DEEP JACKETED
BOWL WITH SWING AWAY TOP COVER, WITH BAFFLE, UNIT HAS 3 BOTTOM BLADES AND
UPPER WAGON WHEEL STYLE BLADE, APPROXIMATE 5" DIAMETER OUTLET WITH VALVE,
SMALL MIXER/COOLER 26" DIAMETER X 22" DEEP BOWL 75 LITER CAPACITY, SWING
AWAY TOP COVER, WITH 2 BLADE IMPELLER, 5" DIAMETER OUTLET, UNIT IS DRIVEN BY
DELTA Y MOTOR 4.5/5.5 KW, 9.5/8.15 AMPS, 1720/3470 RPM, V-BELT DRIVE
|
      |
|
4128 |
BANBURY MODEL 00, S/N 50319, 25 HP 440 VOLT 1750 RPM BRAKE MOTOR, 1.62
GALLON LIQUID CAPACITY INCLUDING NECK VOLUME, MACHINE IS 97" LONG X 34" WIDE
|
 |
|
5482 |
CONAIR 3 COMPONENT
BLENDER MODEL MCMX3, 3 COMPONENT VOLUMETRIC BLENDER, 115 VOLTS, EACH BIN IS
14" X 14" X 18", STRAIGHT SIDE WITH 13" 45 DEGREE CONE, SITE GLASS, MATERIAL
LEVEL SENSORS, AND MANUEL SLIDE GATES ON EACH BIN, AUGER SIZES ARE 3/4",
1/5", AND 2", APPROXIMATELY 1000 LBS/HR TOTAL CAPACITY. (2 AVAILABLE) |
 |
Quotation Request Form
Click On Any Photo To Enlarge |
