|
| |
Quotation Request Form
Click On Any Photo To Enlarge
|
Stock # |
Model |
Picture |
| 6693 |
FARRIS TYPE 550 CHVT
PROFILE PULLER, S/N 3036, 4.5" X 28" CONTRACT AREA BELT, UP TO 6" WIDE
PROFILE, 1.5 FEET PER MINUTE TO 227 FEET PER MINUTE RANGE, 5 HP RELIANCE DC
MOTOR THROUGH A GEAR BOX, MANUAL OPEN/CLOSE |
 |
| 6708 |
CONAIR MODEL
SWCB-STRAWWRAPPER, S/N MPM-14527
230/1/60 OPERATION, 18 MAXIMUM AMPS |
 |
| 6710 |
GATTO MODEL SWC73/4
STRAW WRAPPER, S/N 8510452,
115/1/60 OPERATION, 20.6 MAX AMPS, LAST USED ON 7" COFFEE STIR STRAWS AND 7
3/4" JUMBO STRAWS |
 |
| 6711 |
CONAIR MODEL
DPC-10506-1 VACUUM SIZER TANK, S/N
787348, SINGLE 12" X 12" X 72" LONG TANK, 5.5" DIAMETER END OPENINGS, 1.5 HP
PUMP, 440 VOLTS, 28" WIDE X 22 DEEP X 14" HEIGHT FIBERGLASS RESERVOIR, ON
MOUNTING PADS |
 |
| 6713 |
GATTO STRAW CUTTING
MACHINE, NO S/N, VARIABLE SPEED CONTROL, DIGITAL READOUT |
 |
| 6714 |
CONAIR MODEL
SWCB-STRAWWRAPPER, S/N MPM-145251, 230/1/60 OPERATION, 18 MAXIMUM AMPS |
 |
| 6716 |
CONAIR/GATTO MODEL
SWC73/4 STRAW WRAPPER, S/N
9515251, 230/1/60 OPERATION, 1 HP 7.5 MAX AMP MOTOR, LAST USED TO WRAP 8
3/16" STRAWS |
 |
| 6717 |
WAYNE MFG & DIE 3/4"
EXTRUDER, S/N 1248-893, 24:1 L/D, 1.5 HP 1750 RPM DC MOTOR, AIR COOLED
BARREL, 3 ELECTRICALLY HEATED ZONES, OMRON E5CN TEMPERATURE CONTROLS, 42"
CENTERLINE, MOUNTED ON ADJUSTABLE HEIGHT STAND, 230 VOLT OPERATION (7
AVAILABLE) |
 |
| 6719 |
CONAIR/GATTO MODEL SWC8.734 STRAW WRAPPER, S/N
8911861, 460/1/60 OPERATION, 3 KVA, 7.5 MAXIMUM AMPS |
 |
| 6721 |
CONAIR/GATTO MODEL DPC-104.12.2 VACUUM SIZER TANK, S/N 8911864, 460/3/60,
6.7 KVA, 8.9 MAXIMUM AMPS, 3 HP WATER PUMP, TWO 12" X 12" X 72" LONG TANK
SECTIONS, 28" WIDE X 22" DEEP X 14" TALL WATER RESERVOIR TANK, 4.5" DIAMETER
END OPENINGS, MOUNTED ON V-CASTERS |
 |
| 6722 |
CONAIR/GATTO PROFILE PULLER, 230/1/60 OPERATION, 2 HP MOTOR, 15 MAX AMPS, 4
X 15 BELT, DIGITAL READOUT |
 |
| 6634 |
USED RDN
MODEL 2.0 PVS VACUUM SIZING TANK CONSTRUCTED OF STAINLESS STEEL FOR UP TO 2"
OD DIAMETER TUBING AND HOLLOW SHAPES. APPROXIMATELY 8' LONG TANK IS DIVIDED
INTO THREE COMPARTMENTS: A 6' LONG SIZING COMPARTMENT, A 12" LONG
COMPARTMENT FOR ADDITIONAL COOLING AND WATER SEAL AND A 8" LONG SECTION FOR
WATER REMOVAL. VACUUM PUMP WITH 1/2 HP DC MOTOR AND CONTROL. DIGITAL
DISPLAY. CASTER MOUNTED. SERIAL #27735. NEW 10/30/90. INCLUDES SPARE NEW
VACUUM PUMP. 115/1/60.
|
    |
| 6659 |
36" X 6"
BELT PROFILE PULLER, HAND WHEEL HEIGHT ADJUSTMENT, APPROX 1/2 HP MOTOR THRU
GEARBOX, CHAIN AND SPROCKET DRIVE |
 |
| 6276 |
CONAIR
JETRO/GATTO MODEL DPC1070-14-3 VACUUM SIZER TANK, S/N 9515230, 230/3/60,
9.75 MAXIMUM AMPS, 2 HP WATER & VACUUM PUMPS, 72" LONG SECTION ONE, 72" LONG
SECTION TWO, AND 24" LONG SECTION THREE, 14 FEET LONG X 14" X 14" OVERALL
TANK, 24" X 24" X 14" FIBERGLASS WATER RESERVOIR, COMPLETE WITH STARTER AND
CONTROLS FOR BOTH PUMPS, UP TO 6" DIAMETER PIPE, MOUNTED ON V-CASTERS, 1995
MODEL YEAR |
  |
| 5750 |
GATTO
DEVELOPMENT CORP MODEL HS2-4 PROFILE SAW,
S/N 8711073, 460 VOLTS, 3-PHASE, 60 HZ, 31 MAX AMPS, ANALOG PRODUCT COUNTER,
TABLE SPEED SYNCHRONIZE CONTROL, 10" DIAMETER BLADE, 3.5" OD REAR DUST
DISCHARGE VENT, MOUNTED ON CASTERS, RIGHT HAND HOME POSITION (RIGHT TO LEFT
OPERATION) REQUIRES 60-80 PSI FOR OPERATION |
    |
| 6160 |
CONAIR
JETRO/GATTO MODEL DPC104C VACUUM TANK, 12' LONG X 7 7/8 WIDE X 7 7/8 DEEP,
5" OD END OPENINGS, 1 HP 208-230/460 VOLT MOTOR WITH CIRCULATION PUMP, ALLEN
BRADLEY CONTROLS, S/N 94482 |
  |
| 6161 |
KILLION 2"
SERVO CUTTER, S/N 13489, CONNECTIONS FOR BLOW-OFF, CONVEYOR, ENCODER, AND
ELECTRONIC EYE, TOUCHPAD DIGITAL CONTROLS, MOUNTED ON CASTERS |
  |
| 6162 |
PROGRESSIVE
MACHINE COMPANY MODEL S190EC TRAVERSE
SPOOLING WINDER, S/N 30316RH, CHAIN, BELT, AND
SPROCKET DRIVEN THROUGH WINSMITH SPEED REDUCER, 24" MAXIMUM PACKAGE WIDTH,
36" MAXIMUM PACKAGE DIAMETER, 200 LB MAXIMUM LOAD PACKAGE, UP TO 350
FEET PER MINUTE (APPLICATION DEPENDANT) |
    |
|
5839 |
USED CDS VACUUM
CALIBRATION TABLE MODEL CVC12-175L IN CONJUNCTION WITH WATER COOLED VACUUM
CHAMBER MODEL CAVT20-24-48SP. UNIT CONSISTS OF (2) WATER COOLED MOLDS, 8.5
X 6.5 X 7 AND 9.5 X 7.5 X 7 FOR CONTINUOUS EXTRUSION OF ARTIFICIAL
LUMBER. VACUUM CHAMBER IS 24 SQUARE X 48 LONG STAINLESS STEEL
CONSTRUCTION. SYSTEM INCLUDES OPERATOR CONTROLS AND WATER PUMPS. NEW 2000. |
 |
|
5840 |
USED 24 LONG CDS MODEL
CST20-24L SPRAY COOLING TANK. 24 WIDE X 20 DEEP X 24 LONG, STAINLESS
STEEL CONSTRUCTION. EQUIPPED WITH PLEXIGLAS COVER AND (2) WATER PUMPS, 7.5
HP AND 2 HP. MOUNTED ON CASTERS. INCLUDES WATER RESERVOIR. NEW 2000. |
 |
|
5841 |
USED 24' LONG CDS MODEL
CST20-24L SPRAY COOLING TANK. 24" WIDE X 20" DEEP X 24' LONG, STAINLESS
STEEL CONSTRUCTION. EQUIPPED WITH PLEXIGLAS COVER AND (2) WATER PUMPS, 7.5
HP AND 2 HP. MOUNTED ON CASTERS. INCLUDES WATER RESERVOIR. NEW 2000. |
 |
|
5842 |
USED CDS MODEL CST24-90-24SPL AUXILIARY SPRAY
COOLING TANK WITH INDEXING CAPABILITY FOR PASSING LUMBER UNDER ADDITIONAL
COOLING NOZZLES PERPENDICULAR TO EXTRUSION FLOW PRIOR TO EXITING TANK. TANK
IS 8 WIDE X 24 LONG. HAS STAINLESS STEEL CONSTRUCTION, EQUIPPED WITH
APPROXIMATELY 10 WIDE 24 LONG STAINLESS STEEL DUMP TABLE FOR COLLECTING
EXTRUDED PRODUCT AFTER CUT-OFF SAW. PRODUCT IS THEN DEPOSITED ONTO SIDE
SHIFT CONVEYOR WHERE ADDITIONAL COOLING FROM OVERHEAD SPRAY NOZZLES OCCURS.
UPON COMPLETION, COOLED PRODUCT IS THEN DISCHARGED THROUGH SIDE OF
COOLING TANK. NEW 2000. |
 |
|
5844 |
CDS PIPE
HAUL OFF MODEL CCH460-L-SP, S/N 481200, CLEATED CHAIN FOR 7" X 9" SLAB,
FOUR TRACTION BEAMS WITH 60" CONTACT LENGTH WITH 2" X 7.25" X 4.75" FLAT
CLEATS, PENDULUM MOUNTED UPPER BEAMS FOR POSITIVE GRIP PNEUMATIC
CLAMPING, MECHANICAL HEAVY DUTY HEIGHT ADJUSTMENT FOR LOWER BEAM,
PNEUMATICALLY CONTROLLED CLAMPING PRESSURE SIDE BEAMS, 42" CENTERLINE
HEIGHT ADJUSTABLE 3" UP OR DOWN, 1.25" LEVELING JACKSCREWS ON FRAME, 0.5
TO 15 FEET PER MINUTE SPEED RANGE, FOUR 1.5 HP A/C INVERTER MOTORS WITH
7.5 HP INVERTER DRIVE, SINGLE STAGE TRANSMISSION, LEFT TO RIGHT MACHINE
OPERATION, 460/3/60 INPUT POWER, FRONT MOUNTED OPERATOR PANEL WITH
PNEUMATIC CLAMP CONTROLS, START/STOP PUSH BUTTONS, DIGITAL SPEED
INDICATOR, OPEN/CLOSE PUSH BUTTONS. REMOTE CONTROL OPERATOR STATION WITH
START/STOP PUSH BUTTONS, MANUAL DIGITAL SPEED ENTRY MODE
SELECTOR SWITCH, 10 TURN POTENTIOMETER, DIGI-LOK DIGITAL SPEED CONTROL
AND DISPLAY, 2000 MODEL YEAR
|
 |
|
5845 |
USED CDS MODEL
CTS-C-7-14L CROSS CUT TRAVELING CUT OFF SAW. SERIAL #471200. 460 VOLT AC
INPUT, HAS APPROXIMATELY 28 DIAMETER BLADE WITH MAXIMUM 14 SAW TRAVEL. NEW
2000. |
 |
|
5747 |
15MM
GOTTFERT EXTRUSION-METER, S/N 9242, 1980 MODEL
YEAR, MEASURES THE PARAMETERS RELEVANT TO THE
EXTRUSION PROCESS OR TO INJECTION MOLDING.
SUITABLE FOR DETERMINING THE REAL LOGICAL
CHARACTERISTICS OF EXTRUDERS AND FOR DETERMINATION
OF FLOW CURVES YIELDING DEFINITIVE INFORMATION ON
THE PROCESSING BEHAVIOR OF MOLDING MATERIALS |
 |
|
2016 |
Versa Cutter - 0 To 2.25" OD Capacity,
Digital Readout, Electronic Length Programmer, Traversing Table, 2 HP, 230
Volts |
 |
|
2018 |
VERSA MODEL
45W CUTTER/PULLER, S/N 45067, 0 To
2.25" OD Capacity, Digital Readout, Adjustable Pull Rolls, Hour Meter, 2 HP |
 |
|
2224 |
RAINVILLE MODEL 118-4A PULLER, S/N 45067,
0 To 2.25" OD Capacity, Digital
Readout, Adjustable Pull Rolls, Hour Meter, 2 HP |
 |
|
3822 |
SAKAS MODEL T24 DUAL SAW,
S/N 16487, 2-10" Blades, 5 HP Motor
Controls Each Blade, Top And Bottom Air Hoses Lead To Single Air Take-Off |
 |
|
4244 |
APPEARS TO BE GATTO VACUUM TANK. TWO 5 HP 208-230/460 VOLT VACUUM PUMPS,
10" OPENING, 23" X 16" X 17" FIRST SECTION, 59" X 16" X 17" SECTION TWO AND
THREE, NEMA STARTER CONTROLS, CASTER BASE |
 |
|
4276 |
HOME MADE PULLER, FIXED HEIGHT OF 38.5" AT PULLER CENTER. PULLER IS 52"
LONG X 2" WIDE, NO DRIVE MOTOR |
 |
|
4452 |
VULCAN MFG TRIPLE PASS SIZING PACK,
Model CS60STI. Upper Tank is 10' Long x 8" Deep x 8.5" Wide. Lower Tank is
16' Long x 8" Deep x 16" Wide. Unit Has Two Independently Driven 15.5" Pull
Wheels For Up and Downstream. Pull Wheels Are Driven By Reliance 1 HP
Variable Speed DC Motors Which Are Controlled By a 230V Control Panel Using
Fenner M-Drive Controllers. Recirculation Tank Is 6' Long x 16" Deep x
21.5" Wide and Has A 1 HP 208-230/460 3-Phase Motor, Unit Has Built in 3" x
12" Belt Puller On Downstream Side Driven By a 1 HP DC Variable Speed Motor
|
 |
|
4714 |
GATTO CS-7-24 PROFILE SAW, Right to Left Operation, 7" OD Maximum Profile,
480 Volts 3 Phase, 5 HP, 20" Carbide Tip Blade, 24" Maximum Table Travel,
12 Cuts Per Minute Maximum, 42" (+ or - 2" adjustment) Center Height,
Dimensions 34" x 58.5" x 84", Approx 1500 Lbs
|
 |
|
4715 |
CONAIR/GATTO HS-2-4 PROFILE SAW, 2 HP 480 VOLTS, 3 PHASE, 10" HIGH SPEED
STEEL BLADE, PNEUMATIC HOLD-DOWNS, TUBING CAPACITY 0-2 3/8" OR UP TO
PROFILES 2" X 4" WIDE, 10" TABLE TRAVEL, DIMENSIONS ARE 43 3/4" X 32 1/4" X
57 1/2" APPROXIMATE WEIGHT 1150 LBS |
 |
|
4716 |
EMERY FIBERGLASS VACUUM CLEANER, SECTION ONE IS 22.5" LONG X 14" DEEP X 14"
WIDE, SECTION TWO AND THREE ARE 70" LONG X 14" WIDE, 14" DEEP, 8" DIAMETER
END OPENING, MOUNTED ON V-GROOVE CASTER STAND, FIBERGLASS CONSTRUCTION, NO
PUMPS |
 |
|
4723 |
GATTO VACUUM SIZING TANK, 7.5" DIAMETER END OPENINGS, SECTION ONE IS 23.5"
LONG X 13.5" DEEP X 14" DEEP, SECTION TWO AND THREE ARE 13.5" WIDE X 14"
DEEP X 71" LONG, STAINLESS STEEL 120" LONG X 21" WIDE X 18" RESERVOIR
TANKS, MOUNTED ON V-GROOVE CASTERS, NO PUMPS |
 |
|
5046 |
METALPLAST
MODEL PB218-SP PROFILE PULLER, S/N 199062, 2" WIDE X 22" LONG BELT, TWO
PNUEMATIC PROFILE CUTTERS ADJUSTABLE FROM 45 TO 60 DEGREES, 460 VOLT
OPERATION, WITH SECONDARY TAKE UP CONVEYOR WITH 2" WIDE BELT 8 FEET LONG
|
 |
|
5047 |
METALPLAST
MODEL MPT18-SP SHUTTLE TABLE, S/N 79235, 115 VOLTS, SINGLE PHASE, 60 HZ,
WITH METALPLAST MODEL 1200 CONTROLLER |
 |
|
5336 |
GOODMAN TRAVELING UP-CUT PROFILE SAW, S/N 4796, 9" OD BLADE, LENGTH CONTROL,
480 VOLT OPERATION, PNUEMATIC HOLD DOWN |
 |
|
5405 |
GATTO MODEL
MD210-6 PULLER, S/N 734050, 8" X 36" BELTS, BALDOR DC CONTROLLER, CHAIN
DRIVE, SPEED RANGE: LOW/LOW 0-24 FPM, LOW/HI 24-84 FPM, & HI/HI 84-344 FPM
|
 |
|
5406 |
LITTLEFORD
MODEL ATS-9724 PROFILE SAW, S/N 20204-3330, 24" DIAMETER BLADE, 24" TRAVEL |
 |
|
5407 |
CONAIR
MODEL PCCS-10-30 TRAVELING CROSS-CUT SAW, S/N MPM-132829, 30" DIAMETER
BLADE, 34" + 4" SAW BED HEIGHT, 5 HP ARBOR MOTOR BLADE DRIVE, 230/460
3-PHASE OPERATION, REQUIRES 65 PSI MINIMUM AIR PRESSURE FOR OPERATION,
DIMENSIONS ARE 60"L X 104"W X 65"H |
 |
|
5640 |
RDN MODEL
2.0 PVC VACUUM SIZER, S/N 24536, 1/3 HP WATER PUMP, BLOWER MOTOR 500 WATTS,
0-45" WATER
VACUUM LEVEL, 115 VOLT SINGLE PHASE 60 HZ OPERATION, CONTROL VALVES FOR
WATER RING, WATER WELL, WATER FILL, AND TOOL SPRAY, 2" OD MAXIMUM CAPACITY
PROFILE, VACUUM TANK SECTION ONE IS 76" LONG, SECTION TWO IS 12" LONG, AND
SECTION THREE IS 7 3/4" LONG, MOUNTED ON V-CASTERS MANUFACTURED 12/88 |
 |
|
5641 |
VERSA MODEL
75 DAC ON DEMAND CUTTER, S/N 7697, 40" CENTERLINE ON 36" HIGH PORTABLE
TABLE, VERSA HIGH RESOLUTION DIRECT LENGTH DIGITAL CONTROLLER, 2.0" MAXIMUM
CAPACITY, 1 HP 115 VOLT DRIVE MOTOR, 290 LBS MAXIMUM TORK, 850 RPM KNIFE
SPEED, 550 MAXIMUM CUTS PER MINUTE |
 |
|
5700 |
RDN SPRAY
COOLING TANK, CARBON STEEL CONSTRUCTION,
154" LONG X 12" HIGH X 12" WIDE TANK, 1.5 HP 208-230/460 VOLT 3450 RPM PUMP,
HEAT EXCHANGER, 83" LONG X 14.5" WIDE X 16" DEEP LOWER RESERVOIR, MOUNTED ON
V-CASTERS |
 |
|
5701 |
RDN SPRAY
COOLING TANK, 154" LONG X 12" DEEP X 12" WIDE, 1.5 HP 208-230/460 VOLT PUMP,
HEAT EXCHANGER, MOUNTED ON V-CASTERS, 83" LONG X 16" DEEP X 14.5" WIDE LOWER
RESERVOIR TANK |
 |
|
7440 |
PMC TANK, STAINLESS STEEL, 2 STAGE SPRAY TANK 10' LONG X 2' WIDE X 2' DEEP,
10" PIPE |
 |
|
8469 |
RDN MODEL D4-20 AUTOMATIC DUMP TABLE |
|
|
8470 |
RDN COOLING TABLE 20 FEET LONG |
 |
|
8992 |
GATTO 205-4 PULLER, S/N 723814, 4" X 18", HEIGHT ADJUSTABLE PULL ROLLERS, 3"
X 5" OPENING, 1 HP 240 VOLT MOTOR |
 |
Quotation Request Form
Click On Any Photo To Enlarge
|
