JOHNSON 16" DIAMETER X 30" WIDE THREE ROLL SHEET DOWN STACK, PNEUMATICALLY OPERATED CORED CHROME ROLLS, ROLLS ARE DRIVEN BY A SILENT CHAIN DRIVE, DRIVE GEARBOXES FOR BOTH THE CHROME ROLLS AND THE PULL ROLLS OPERATE AT 1.0, 2.07, 5.058, AND 10.465:1 RATIOS, PULL ROLLS ARE 8" DIAMETER X 30" WIDE AND HAVE BEEN NEWLY RECOVERED. PULL ROLL IS DRIVEN BY A 3 HP 180 VOLT DC MOTOR THRU A GEARBOX

DAVIS STANDARD 16" X 48" 3 ROLL DOWNSTACK, S/N N9057, SO# 50742, MANUFACTURED 10/93, TUNGSTEN TOP ROLL, CHROME MIDDLE & LOWER ROLLS, ALL ROLLS ARE CORED FOR COOLING, SILENT CHAIN DRIVE, PNEUMATICALLY OPERATED, COOLED VIA THREE 3 HP PUMPS AND HEAT EXCHANGERS, ROLLER CONVEYOR, 8" X 48" RUBBER PULL ROLL STAND WITH SLITTER STATION, COMPLETE WITH OPERATOR STATION

MARSHALL & WILLIAMS 16" DIAMETER X 54" WIDE 3 ROLL DOWN STACK, S/N 4885, SO# 27223, MSO #27221, CERAMIC ROLLS ARE CORED FOR COOLING VIA 6 HEAT EXCHANGERS AND THREE 3 HP PUMPS, 8" X 54" RUBBER PULL ROLL STAND
WITH SLITTER STATION, INCLUDES ROLLER CONVEYOR AND
OPERATOR CONTROL STATION WITH RELIANCE FLEX PAX
DRIVE UNIT

NRM 78" WIDE 3 ROLL SHEET STACK, ONE 16" DIAMETER PATTERN CORED ROLL, TWO 16" DIAMETER CHROME CORED
ROLLS THAT ARE MANUALLY ADJUSTABLE, ROLLS DRIVEN BY A 5 HP 180 VOLT DC MOTOR THRU A REDUCER, FRAME MOUNTED WITH PUMPS AND HEAT EXCHANGERS, APPROX 12' LONG SECTION OF ROLLER CONVEYOR, ONE CONTROL PANEL WITH EUROTHERM 808 DIGITAL CONTROLS, ONE NRM 2 ROLL PULL ROLL STAND WITH TWO 8" DIAMETER 78" WIDE RUBBER ROLLS THAT ARE PNEUMATICALLY ADJUSTABLE AND ARE DRIVEN BY A 5 HP MOTOR THRU A REDUCER WITH A FOCUS CONTROLLER, O.A.D. ARE 11'8"W X 19'L X 9'T AND 4'W X 10'L X 5'T

CINCINNATI MILICRON (MANUFACTURED BY WELEX) 2 ROLL STACK/LAMINATOR, NO S/N, TWO CORED FOR COOLING CHROME ROLLS 17.75" DIAMETER X 34" WIDE, TWO ALUMINUM GUIDE ROLLS, ONE 17.75" DIAMETER X 31" WIDE AND ONE 8" DIAMETER X 31" WIDE CHROME ROLLS ARE PNEUMATICALLY OPERATED AND ARE POWERED BY A 5 HP 1750 RPM 500 VOLT DC MOTOR THRU KOELLMANN 18.131:1 GEARBOX VIA SILENT CHAIN DRIVE, ROLLS COOLED VIA THREE 5 HP PUMPS AND HEAT EXCHANGER, PULL ROLL STATION HAS TWO RUBBER COATED STEEL ROLLS 17.75" DIAMETER X 34" WIDE AND ONE 8" DIAMETER X 34" WIDE, PNEUMATICALLY OPERATED AND
DRIVEN BY SAME DRIVE SYSTEM AS ROLL STACK, INCLUDES UNWINDER STATION WITH APPROXIMATE 40" DIAMETER PACKAGE, DUAL TENSION CONTROLS, FOOT PEDAL ACTUATED, NO DC DRIVES OR CONTROLS FOR ALL ITEMS, ALL SET FOR 42" CENTERLINE

DAVIS STANDARD 3 ROLL DOWN STACK, 3 18" DIAMETER X 42" WIDE CORED FOR COOLING CHROME ROLLS, 3 HP DC MOTOR THROUGH GEAR BOX POWERING SILENT CHAIN DRIVE, HYDRAULIC PRESSURED ROLLS, CHROME ROLLS ARE COOLED BY TWO CONAIR/TEMPRO MODEL TC2-DI THERMOLATORS, 460 VOLTS, 26.3 MAX AMPS, 9 KW EACH, 3/H HP PUMP, DIGITAL DISPLAY, RS232 COMMUNICATIONS PORT, HYDRAULICALLY PRESSURED 8" DIAMETER X 53" RUBBER PULL ROLLS, PULL ROLL AND DOWN STACK ARE MOUNTED ON V-CASTERS

PROCESSING TECHNOLOGIES INC MODEL 5024 3 ROLL DOWN
STACK, S/N 297-CRS, MANUFACTURED 2/2000, 24"  DIAMETER X 50" WIDE LOWER 2 CHROME ROLLS, UPPER ROLL IS 12" X 50", ALL CHROME ROLLS CORED FOR COOLING, ROLLS ARE HYDRAULICALLY OPERATED AND POWERED BY A 7.5 HP DC MOTOR VIA SILENT CHAIN DRIVE, CONTROL TECHNIQUES MENTOR II DC DRIVES FOR STACK AND PULL ROLL STATION, PULL ROLLS PNUEMATIC OPERATION AND POWERED BY A 5 HP DC MOTOR, COOLING VIA 3 X 10 HP PUMPS INTO HEAT EXCHANGERS

12/1996 MODEL DAVIS STANDARD 3 ROLL DOWN STACK, S.O. 56433, S/N 56422, THREE HYDRAULICALLY ADJUSTED 24" DIAMETER X 54"  WATER COOLED CORED CHROME ROLLS. CHROME ROLLS ARE NEWLY RE-CHROMED AND ARE GEAR DRIVEN BY A 5 HP DC MOTOR THRU A GEARBOX. CHROME ROLLS ARE COOLED BY THREE 28" HEAT EXCHANGERS WITH  7.5 HP PUMPS, 8' UNITIZED ROLLER CONVEYOR, 8" DIAMETER X 54" WIDE PNUEMATIC PRESSURE RUBBER PULL ROLLS WHICH ARE DRIVEN BY A 3 HP DC MOTOR THRU A GEAR BOX.  PULL ROLLS ARE FOLLOWED BY AN ANTI-STATIC BATH USING 12" DIAMETER X 54" WIDE GUIDE ROLL.  STACK IS CONTROLLED BY A UNITIZED DAVIS STANDARD CONTROL PANEL WITH 2 WORLDWIDE CONTROL TECHNOLOGIES MENTOR II SCR DRIVE UNITS; ONE FOR THE CHROME ROLLS AND ONE FOR THE PULL ROLLS, 1 ALLEN BRADLEY IMC SC/ASS BOTTOM ROLL DRIVE A/C SERVO CONTROLLER, INCLUDES OPERATOR CONTROL STATION, EXCELLENT CONDITION