Array ( [0] => just-arrived [1] => pelletizers [2] => pelletizing-lines [3] => pelletizing-spin-dryers [4] => just-arrived [5] => pelletizers [6] => pelletizing-lines [7] => pelletizing-spin-dryers )
  • Stock#: 16843

    USED GALA UNDERWATER PELLETIZING SYSTEM


    GALA UNDERWATER PELLETIZING SYSTEM, S/N 982653, CONSISTING OF MODEL 6D 3500 RPM CUTTER WITH DIE AND WATER BOX MOUNTED ON A STAND, 80 GPM WATER SYSTEM WITH 5 HP PUMP, RESERVOIR, HEATER, HEAT EX-CHANGER AND MODEL 2008BF SPIN DRYER WITH AGGLOMERATE CATCHER, MANUFACTURED 1998, NO CONTROL PANEL. NEW OEM CONTROL PANEL IS AVAILABLE FOR AN ADDITIONAL $16,000.00 AND HAS A APPROXIMATE 16 WEEK LEAD TIME

  • Array ( [0] => just-arrived [1] => extruders-3-5-10 [2] => just-arrived [3] => extruders-3-5-10 )
  • Stock#: 16841

    USED DAVIS STANDARD 6″ 30:1 L/D 300 HP EXTRUDER


    DAVIS STANDARD MODEL 60IN60T 6″ 30:1 L/D EXTRUDER HAVING A SEVEN (7) ZONE ELECTRICALLY HEATED, WATER COOLED (CLOSED LOOP) BARREL AT A 42″ CENTER-LINE HEIGHT. GEARBOX HAS A REDUCTION RATIO OF 24.29:1 AND IS RATED AT 530 HP AT A SERVICE FACTOR OF 1.5. GEARBOX IS DIRECT DRIVEN IN A WRAP AROUND MANNER BY A 300 HP 1750/2500 RPM RELIANCE AC MOTOR WITH INVERTER. GEARBOX HAS PUMP, FILTER, AND LARGE HEAT EX-CHANGER FOR COOLING. 7″ X 11″ WATER COOLED FEED THROAT. TEMPERATURE CONTROL PANEL WITH APPROXIMATELY FOURTEEN (14) ZONES OF NEW TEMPERATURE CONTROLLERS. CONTROL PANEL AND INVERTER ARE UNITIZED ON THE SAME BASE AS THE EXTRUDER. EXTREMELY CLEAN. APPROXIMATELY 2000 HOURS OF USE. S/N AU143. S/O 78356. MANUFACTURED 8/04

  • Array ( [0] => just-arrived [1] => extruders-3-5-10 [2] => just-arrived [3] => extruders-3-5-10 )
  • Stock#: 16839

    USED AET 6″ 24:’ L/D 300 HP EXTRUDER


    AET MODEL 60ASLT24 6″ 24:1 L/D EXTRUDER HAVING A SEVEN (7) ZONE ELECTRICALLY HEATED, WATER COOLED (CLOSED LOOP) BARREL AT A 45″ CENTER-LINE HEIGHT. GEARBOX IS A KOELLMANN MODEL UNEX 8.12 , HAS A REDUCTION RATIO OF 20.07:1 AND IS RATED AT 400 HP AT A SERVICE FACTOR OF 1.6. GEARBOX IS DIRECT DRIVEN OUT THE BACK BY A 300 HP 1755 RPM ABB AC MOTOR WITH INVERTER. WATER COOLED FEED THROAT WITH 7″ WIDE X 10″ LONG ON CENTER ENTRANCE. TEMPERATURE CONTROL PANEL WITH FOURTEEN ZONES. S/N E2355. MANUFACTURED 1/28/04. 460/3/60 INPUT

  • Array ( [0] => just-arrived [1] => high-intensity-mixers [2] => mixers [3] => ribbon-blenders [4] => just-arrived [5] => high-intensity-mixers [6] => mixers [7] => ribbon-blenders )
  • Stock#: 16833

    USED CHARLES ROSS & SON COMPANY JACKETED RIBBON MIXER/DRYER


    CHARLES ROSS & SON COMPANY JACKETED RIBBON MIXER/DRYER, MODEL 42C-18, S/N 111144, APPROXIMATELY 600 LITER (25 CUBIC FOOT) CAPACITY, APPROXIMATE 30″ DIAMETER X 60″ LONG INTERIOR DIMENSION, JACKET CERTIFIED BY ROSS METAL FABRICATORS, NATIONAL BOARD #699, S/N 6830, INTERNAL PRESSURE 150 PSI @ 365°F, JACKET PRESSURE 50 PSI @ 365°F, DRIVEN BY A 15 HP MOTOR THROUGH A GEARBOX

  • Array ( [0] => just-arrived [1] => 75-hp-granulators [2] => as-is-granulators-30-hp [3] => feed-paddle-roll-granulators [4] => just-arrived [5] => 75-hp-granulators [6] => as-is-granulators-30-hp [7] => feed-paddle-roll-granulators )
  • Stock#: 16836

    USED RAPID 500-120 KURF FEED ROLL GRANULATOR


    ONLY ONE LEFT !

    RAPID MODEL 500-120 KURF GRANULATOR WITH FEED ROLLS, S/N RA 511.246815.20.1, 18″ X 48″ FEED THROAT, 5 KNIFE OPEN ROTOR, 3 BED KNIFE, TANGENTIAL CUTTING CHAMBER, 50 HP 460 VOLT MOTOR, 6″ LEFT HAND AIRVEYOR DISCHARGE, 8mm HOLES SCREENS INSTALLED, INSULATED HOPPER WITH REAR MOUNTED 1200mm WIDE KNURLED STEEL FEED ROLLS WITH DANCER BAR, FEED ROLLS HAVE PNEUMATIC PINCH, HOPPER HAS ELECTRIC POWER BACK JACK ASSIST, INCLUDES ORIGINAL OEM STARTER PANEL WITH ALLEN BRADLEY SOFT STARTER FOR THE GRANULATOR AND A VARIABLE SPEED DRIVE FOR THE FEED ROLLS, REMOTE KEYPAD CONTROL FOR THE FEED ROLLS MOUNTED ON STARTER DOOR, 2015 MODEL YEAR WITH LOW USE AND IS IN EXCELLENT RUNNING CONDITION

    $89,500.00 AS IS, F.O.B. PA

    WAS $143,600.00 NEW IN 2015

  • Array ( [0] => just-arrived [1] => lab-testing-equipment [2] => high-intensity-mixers [3] => just-arrived [4] => lab-testing-equipment [5] => high-intensity-mixers )
  • Stock#: 16830

    USED HENSCHEL FM10US LAB HIGH INTENSITY MIXER


    HENSCHEL MODEL FM10US LAB HIGH INTENSITY MIXER, S/N 001102, VESSEL VOLUME OF 10 LITERS AND A WORKING CAPACITY OF APPROXIMATELY 2 LITERS OR .2 CUBIC FT, INTERIOR OF BOWL IS MANUFACTURED OF STAINLESS STEEL AND IS JACKETED, 3″ DISCHARGE OUTLET AT A 30″ HEIGHT, POWERED BY A 5 HP 230/460 VOLT 1735 RPM MOTOR DRIVEN BY A RELIANCE A/C VARIABLE SPEED CONTROLLER, MIXER IS EQUIPPED WITH THREE TIER BLADES, INCLUDES LID WITH BAFFLE, THERMOCOUPLE, AND TOUCH SCREEN CONTROLS

  • Array ( [0] => just-arrived [1] => shredders [2] => just-arrived [3] => shredders )
  • Stock#: 16826

    USED REPUBLIC MACHINE FALCON 32 SHREDDER


    REPUBLIC MACHINE FALCON 32 SHREDDER, S/N 120132351020, MODEL RM32-20-F-10-1-45-D, 2012 MODEL YEAR IN NEAR NEW CONDITION, SINGLE ROW OF 22 EACH 40mm X 40mm CUTTERS MOUNTED TO A 10″ DIAMETER ROTOR, SINGLE POSITION BED KNIFE, POWERED BY A 20 HP 460 VOLT MOTOR, 3 HP DUAL SPEED HYDRAULIC RAM CONTROL, 8″ PNEUMATIC TAKE OFF BIN, ALLEN BRADLEY MICROLOGIX 1400 PLC CONTROLS, 2″ HOLES SCREEN, HOPPER INLET IS 31″ WIDE X 26″ TALL, MACHINE DIMENSIONS ARE 9′ X 69″ X 88″, MACHINE WEIGHS APPROXIMATELY 8,000 LBS, INCLUDES MANUAL AND ELECTRICAL DRAWINGS

  • Array ( [0] => just-arrived [1] => extruders-twin-screw [2] => just-arrived [3] => extruders-twin-screw )
  • Stock#: 16620

    USED STEER ENGINEERING 12mm TWIN SCREW EXTRUDER


    STEER ENGINEERING PHARMACEUTICAL TWIN-SCREW EXTRUDER, S/N EA00427, MODEL OMICRON 12P, NEW 2014. SCREW DIAMETER IS 12 MM, DIAMETER RATIO (DO/DI) IS 1.45, FLIGHT DEPTH IS 1.9, MAX SCREW SPEED IS 900 RPM, 2HP DRIVE, 3/60/480V

  • Array ( [0] => just-arrived [1] => extruders-twin-screw [2] => pelletizing-lines [3] => just-arrived [4] => extruders-twin-screw [5] => pelletizing-lines )
  • Stock#: 16819

    USED 26mm COPERION ZSK-26 TWIN SCREW EXTRUDER WITH PELLETIZER


    26MM COPERION MEGA MODEL ZSK-26 CO-ROTATING TWIN SCREW EXTRUDER HAVING A MAXIMUM 1400 RPM SCREW SPEED. UNIT IS DRIVEN BY A 30 KW, 2650 RPM AC MOTOR WITH VFD DRIVE THROUGH A GEARBOX HAVING A 1.89:1 GEAR RATIO. UNIT HAS TOUCH SCREEN OPERATOR CONTROLS. EXTRUDER BARREL IS ELECTRICALLY HEATED, WATER COOLED, VENTED, AND CONSISTS OF NINE BARREL SECTIONS ALLOWING FOR APPROXIMATELY A 36:1 L/D RATIO. EXTRUDER S/N IS 289011. INCLUDES STRAND DIE MOUNTED ON THE DISCHARGE AND A NASH ELMO 1.6 KW HP VACUUM PUMP. TYPE 2BL2061-1AH50-4A-Z. ALSO INCLUDES TWO BRABENDER GRAVIMETRIC FEEDERS. FIRST FEEDER IS BRABENDER MODEL FW4 WHICH IS MOUNTED ON THE EXTRUDER FEED. THE SECOND FEEDER IS A BRABENDER FW40/5P14S-0 WHICH IS FREE STANDING, S/N WOO6441/1. DOWNSTREAM INCLUDES A STAINLESS STEEL WATER TROUGH MEASURING 6″ X 6″ X 72″ AND A SHEER BAY MODEL BT2.5 STRAND PELLETIZER, S/N BT25TS-0502. ALL MANUFACTURED IN 2005

  • Array ( [0] => just-arrived [1] => blenders [2] => just-arrived [3] => blenders )
  • Stock#: 16815

    USED PATTERSON THORO BLENDER SYSTEM


    PATTERSON INDUSTRIES 18″ DIAMETER JACKETED THORO BLENDER SYSTEM, S/N 412130-CA11, MAXIMUM WATER PRESSURE IS 125 PSI AT 275 DEGREES, MINIMUM DESIGN METAL TEMPERATURE 32 DEGREES AT 125 PSIG, INCLUDES DELTA THERMAL SYSTEMS MODEL KD331S 12,000 WATT OIL HEATER, S/N 17040, WITH CAGE AND EXHAUST HOOD, ALSO INCLUDES BAUER MODEL DP2.5 AIR COMPRESSOR, 13.5 CFM, 200 PSIG, POWERED BY A 5 HP 480 RPM 230/460 VOLT MOTOR

  • Array ( [0] => just-arrived [1] => mixers [2] => just-arrived [3] => mixers )
  • Stock#: 16783

    USED 40 CUBIC FOOT DOUBLE RIBBON MIXER


    USED APPROXIMATELY 40 CUBIC FOOT WORKING CAPACITY STAINLESS STEEL DOUBLE RIBBON BLENDER, JACKETED CHAMBER. HAS 3-PIECE COVER, AIR CYLINDER ACTUATED CENTER BOTTOM DISCHARGE. NO MIXER STAND INCLUDED. CURRENTLY MOUNTED ON LEGS SUPPLYING APPROXIMATELY 6″ DISCHARGE HEIGHT. MIXER IS CHAIN AND SPROCKET DRIVEN, APPROXIMATELY 10 HP GEAR HEAD MOTOR SUPPLYING 155 RPM OUTPUT. HAS 6″ DIAMETER PINION, 24″ DIAMETER BULL GEAR

  • Array ( [0] => just-arrived [1] => shredders [2] => just-arrived [3] => shredders )
  • Stock#: 16739

    USED BALL & JEWEL SB2525 DUAL SHAFT SHREDDER


    BALL & JEWEL MODEL SB2525 DUAL SHAFT SHREDDER, S/N 9703-38277, HAS 25″ X 25″ FEED OPENING, TRAY FEED HOPPER, DRIVEN BY (2) 20 HP 230/460 VOLT MOTORS, HAS APPROXIMATELY 60″ HIGH DISCHARGE HEIGHT, INCLUDES OPERATOR CONTROL PANEL

  • Array ( [0] => just-arrived [1] => extruders-3-5-10 [2] => extrusion-sheet-lines [3] => just-arrived [4] => extruders-3-5-10 [5] => extrusion-sheet-lines )
  • Stock#: 16744

    USED CROWN 4.5″ EXTRUSION SHEET LINE


    A) 4.5″ 32:1 L/D RATIO EXTRUDER HAVING A SEVEN (7) ZONE ELECTRICALLY HEATED, AIR COOLED, AND VENTED BARREL AT A 64″ CENTER-LINE HEIGHT. GEARBOX HAS A REDUCTION RATIO OF 18:1 AND IS DIRECT DRIVEN IN A TUCK UNDER MANNER BY A 250 HP BALDOR AC MOTOR WITH ABB ACS800 INVERTER. TEMPERATURE CONTROL PANEL WITH 7 BARREL ZONES AND 11 DOWNSTREAM ZONES OF EURO-THERM MODEL 3216 TEMPERATURE CONTROLLERS.

    B) 4.5″ BERINGER MODEL SC4 HYDRAULIC SLIDE PATE SCREEN CHANGER WITH HYDRAULIC POWER PACK.

    C) MAAG MODEL EXTREX 70 MELT PUMP WITH 15 HP AC MOTOR. DRIVE IS INTEGRATED INTO EXTRUDER PANEL, S/N 50138190-10.

    D) 48″ WIDE FLEX LIP DIE MOUNTED ON A STAND

    E) 64″ WIDE COOLING AND POLISHING STAND HAVING A 16″ DIAMETER TOP ROLL, 24″ DIAMETER MIDDLE AND BOTTOM ROLL MOUNTED IN A VERTICAL ARRANGEMENT FOR DOWN-STACK OPERATION. ROLLS ARE DRIVEN VIA SILENT CHANGE A BY 5 HP DC MOTOR. ROLLS ARE AIR ACTUATED. INCLUDES DIP TANK, IDLER ROLL CONVEYOR, 64″ WIDE PULL ROLLS WITH BY 5 HP DC MOTOR AND TEMP CONTROL SYSTEM WITH 7.5 HP PUMPS AND BUILT ONTO FRAME CONTROLS.

    F) HOBBS SINGLE TURRET 2-POSITION WINDER ABLE TO HANDLE UP TO TO 36″ DIAMETER PACKAGES ON 3″ AIR SHAFTS.

  • Array ( [0] => just-arrived [1] => high-intensity-mixers [2] => just-arrived [3] => high-intensity-mixers )
  • Stock#: 16782

    USED HENSCHEL 115JSS HIGH INTENSITY MIXER


    USED KOHRING HENSCHEL MODEL 115JSS HIGH INTENSITY MIXER, S/N 74-322. INCLUDES 100/50 HP 2-SPEED MOTOR, 460 VOLT AC INPUT, 1750/880 RPM. HAS OPERATOR CONTROL PANEL AND FREE STANDING 2-SPEED MOTOR STARTER. INCLUDES 2-TIER STYLE BLADES AND DEFLECTOR BLADE AND HAS AIR CYLINDER ACTUATED DISCHARGE VALVE

  • Array ( [0] => just-arrived [1] => hog-granulators [2] => just-arrived [3] => hog-granulators )
  • Stock#: 16743

    USED RAPID 2442RS GRANULATOR


    RAPID MODEL 2442RS GRANULATOR, S/N 96588-10.1, 24″ X 42″ FEED THROAT, 20 KNIFE 24MM BOLT STAGGERED HOG ROTOR, 3 BED KNIFE, 100 HP 460 VOLT MOTOR, DUAL FLY-WHEELS, PNEUMATIC TILT BACK ASSIST CONVEYOR FEED HOPPER, PNEUMATIC ASSIST DROP DOWN SCREEN CRADLE, 8″ OD AIRVEYOR DISCHARGE, FRAME BASE, STARTER AND CONTROLS NOT INCLUDED

  • Array ( [0] => just-arrived [1] => winders [2] => just-arrived [3] => winders )
  • Stock#: 16735

    USED REEL-O-MATIC B12X SPOOLER


    REEL-O-MATIC MODEL SP B12X TWO POSITION SPOOLER, S/N 2-2679-E06, UNIT HAS TWO 1 3/8″ DIAMETER WINDING SHAFTS WITH 25″ OF FACE WIDTH, POWERED TRAVERSE HAS APPROXIMATELY 34″ OF TRAVEL. TENSION AND SPEED CONTROLS. EACH WINDING SHAFT CAN HANDLE APPROXIMATELY A 20″ DIAMETER SPOOL. VERY CLEAN

  • Array ( [0] => just-arrived [1] => crystallizers [2] => just-arrived [3] => crystallizers )
  • Stock#: 16745

    USED UNA DYN XTLR-1500 CRYSTALLIZER


    UNA-DYN MODEL XTLR-1500 CRYSTALLIZING SYSTEM, S/N 32514DP02 , 2014 MODEL YEAR, MODEL 1250 CFM HIGH HEAT HEATER, GAS-PACK 8” LS, 373,000 BTU/HR, NEW YORK 25 HP BLOWER, MODEL FF-2 DUAL FLOOR FILTER, CYCLONE, FOCUS PRO LCD CONTROLLER

  • Array ( [0] => just-arrived [1] => chillers [2] => just-arrived [3] => chillers )
  • Stock#: 16696

    USED CONAIR ECA10 10 TON AIR COOLED CHILLER


    CONAIR MODEL ECA10 AIR COOLED CHILLER, S/N 244090, 10 TON 15 HP COMPRESSOR, 460 VOLTS, 29.1 MAXIMUM AMPS, 3 HP PROCESS PUMP, USES 410A REFRIGERANT, 110 VOLT EARTH SMART CHILLER SX TOUCH PAD CONTROLS, 2011 MODEL YEAR, IN EXCELLENT RUNNING CONDITION

  • Array ( [0] => just-arrived [1] => extruders-34-3 [2] => just-arrived [3] => extruders-34-3 )
  • Stock#: 16355

    USED WAYNE 1.250″ 30:1 L/D EXTRUDER


    USED WAYNE 1.25″ EXTRUDER, S/N 9414-832, 30:1 L/D, ELECTRICALLY HEATED AIR COOLED VENTED (PLUGGED) BARREL, DRIVEN BY A 7.5 HP D/C MOTOR WITH SCR CONTROL, 230 VOLT INPUT POWER, TRACK WHEEL BASE, INCLUDES SPARE SCREW

  • Array ( [0] => just-arrived [1] => extruders-34-3 [2] => just-arrived [3] => extruders-34-3 )
  • Stock#: 16475

    USED DAVIS STANDARD 1.5″ RUBBER EXTRUDERS (PAIR)


    ONE (1) USED PAIR OF 1.5” 10:1 L/D RATIO DAVIS STANDARD RUBBER EXTRUDERS WITH POWERED FEED ROLLS ON THROATS. UNITS HAVE NONE HEATED, WATER COOLED BARRELS AT A 42” CENTERLINE HEIGHT. SWING AWAY C CLAMPS ON BARREL DISCHARGES. OVERSIZE GEARBOXES HAVE REDUCTION RATIOS OF 17.56:1 AND ARE RATED AT 50 HP AT A SERVICE FACTOR OF 1.25:1. GEARBOXES ARE EACH DRIVEN BY A MARATHON BLUE MAX 5 HP AC MOTOR WITH ALLEN BRADLEY POWER FLEX INVERTERS. MANUFACTURED OCTOBER OF 2004 AND HAVE LIMITED USE. ONE CONTROL PANEL FOR BOTH UNITS AND IS MOUNTED ON ONE OF THE EXTRUDER BASES.  CAN BE OFFERED INDIVIDUALLY. MODEL 150IN20. SHOP ORDER NUMBER: 79238. SERIAL NUMBERS AX176 AND AX179.