Array ( [0] => just-arrived [1] => extrusion-screen-changers [2] => just-arrived [3] => extrusion-screen-changers )
  • Stock#: 17999

    USED GNEUSS SFX75 3″ CONTINUOUS SCREEN CHANGER


    Gneuss model SFX75 3″ continuous screen changer. S/N. 02083047. 460/3/60 operation. Includes PLC control panel

  • Array ( [0] => just-arrived [1] => extruders-3-5-10 [2] => just-arrived [3] => extruders-3-5-10 )
  • Stock#: 17995

    USED BRAMPTON 4.524:1 AC/HB 4.5″ 24:1 EXTRUDER


    One (1) used 4.5″ 24:1 L/D ratio Brampton Engineering model 4.5 24/1 AC HB extruder. Five (5) zone electrically heated,air-cooled, non-vented barrel at a 42″ center-line height. Center-line height is adjustable via hand-wheel. Heavy duty gearbox is belt driven in a wraparound manner by a 250 HP Reliance motor with SCR control. The extruder has a water-cooled feed throat with 4.75″ x 6.5″ on center entrance. The temperature control panel has five (5) zones for the barrel and four (4) zones of temperature controls for die zones. Extruder S/N 85.96926. 460/3/60 input power. Temp panel 125 FLA. Last used on HDPE for corrugated pipe.

  • Array ( [0] => just-arrived [1] => balers [2] => just-arrived [3] => balers )
  • Stock#: 18003

    USED EXCEL EX60 BALER


    Excel model EX60 automatic closed end baling press. S/N EX1091. 150″ x 75″ x 62″ machine size. 48″ x 60″ x 30″ chamber. 60″ x 48″ x 30″ bale. 54″ x 35″ charge chamber opening. 2500 PSI hydraulic system pressure with 124,400 lbs. overall platen force. 40 second cycle time. 34-gallon hydraulic piston pump. Two 6″ bore 54″ stroke hydraulic cylinders. 105-gallon oil reservoir. Powered by 20 HP 230/460 3 phase motor. NEMA 12 controls. Includes 48″ wide x 23′ long in-feed conveyor with 3″ cleats on 30″ centers. S/N C1064. Powered by approximate 5 HP motor with Reliance A/C variable speed drive. Baler is manual tie. Refurbished by Excel (OEM) in 2012.

  • Array ( [0] => just-arrived [1] => 75-hp-granulators [2] => just-arrived [3] => 75-hp-granulators )
  • Stock#: 17975

    USED RAPID W1836 GRANULATOR SYSTEM


    Rapid model W1836 granulator. S/N 500.84751.001 20. 18″ x 36″ feed throat. 3 knife open rotor, 2 bed knife. Super-T tangential cutting chamber. 75 HP 460-volt motor. Insulated conveyor feed hopper with 1 3/4 HP power jack back. Insulated body panels. 6″ right or left hand airveyor discharge mounted on vibration pads. Includes Laros model E515-36-1306-48 conveyor. S/N E5153270-065888. 1 HP 460-volt motor. 34″ wide belt x 161″ long plus 48″ top horizontal section. 2.25″ tall cleats on 52″ centers. Caster conveyor stand also includes stand-alone starter/control panel for the granulator, hopper jack back, and the conveyor. Granulator mounted e-stop. Manufactured 9/2006. Also includes Sterling #6 blower, #8 cyclone, and #8 cyclone stand.

  • Array ( [0] => just-arrived [1] => 75-hp-granulators [2] => just-arrived [3] => 75-hp-granulators )
  • Stock#: 17982

    USED CUMBERLAND 2050B GRANULATOR


    Cumberland model 2050B granulator. S/N 51310-95013. 20″ x 50″ feed throat. 3 knife high shear hard-faced and water cooled rotor. 2 bed knives on water cooled bed blocks. 125 HP 460-1780 RPM motor. Modified conveyor feed hopper with 17″ x 8″ opening and plate magnet. Airveyor discharge has 8″ (OK200) outlet that can removed to return to standard 10″ OD. Hard faced chamber doors and bed shields. Air purge bearings. 1/8″ screen installed. Mounted on a step base. Includes Schneider Electric soft starter with enclosure.

  • Array ( [0] => just-arrived [1] => dryers-500-3500-cfm [2] => just-arrived [3] => dryers-500-3500-cfm )
  • Stock#: 17978

    USED NOVATEC MPC-1750 DRYER AND HOPPER


    One (1) used Novatec model MPC-1750 twin tower desiccant dryer rated at 1750 CFM. Control panel is mounted on the same base as the dryer. With free standing heater box and nominal 15,000 pound capacity hopper with lid, plenum and stand.  S/N 12-034-3367. 460V/3/60Hz input.  254 amps, 211 KVA, Manufactured in 2004

  • Array ( [0] => just-arrived [1] => extrusion-sheet-dies [2] => just-arrived [3] => extrusion-sheet-dies )
  • Stock#: 17966

    USED EDI HRC300 90″ SHEET DIE


    One( 1) used Extrusion Dies Inc. model Ultra-flex HRC 300 sheet die with Fast Gap having a 90″ slot opening. Integral upper flexible lip is adjustable, removable lower lip. 45 degree restriction bar. Adjusting bolts on 1″ centers. .300 gap .adjustment. Coat-hanger manifold. 1 ½” back center feed. Fast gap needs repair, but die can be used without the fast gap. Manufactured in 1995. S/N 95-17703. Weighs 4236 pounds.

  • Array ( [0] => just-arrived [1] => mixers [2] => just-arrived [3] => mixers )
  • Stock#: 17929

    USED METALMECANICA ROSSI STAINLESS MIXER


    One (1) Used Metalmecanica Rossi model MV stainless steel screw blender. S/N 0102. Blender is 5′ diameter x 10′ straight side x 6′ cone bottom. Includes (2) 4″ top mounted inlets and a 10″ x 12″ bottom outlet. Blender has an approximate total vessel volume of 230 cubic feet and a working capacity of 200 cubic feet. Center enclosed screw is driven by 15 HP (11 kw) motor. Discharge includes air actuated valve and Eriez model 10.5″ x 8″ TGH-2 metal catcher. Swing open access hatch. Does not included legs. Manufactured in 2014.

    6 Available

  • Array ( [0] => just-arrived [1] => extruders-3-5-10 [2] => just-arrived [3] => extruders-3-5-10 )
  • Stock#: 17954

    USED WELEX 3.5″ 30:1 L/D 150 HP EXTRUDER


    One (1) used Welex 3.5″ 30:1 L/D extruder. Electrically heated water cooled (closed loop) and vented barrel at an approximate 69″ center line height. Center line height can be reduced approximately 8″ by removing an additional base. Lufkin change gear gearbox is direct driven in a tuck under manner by a 150 HP Emerson DC motor with Control Technique Mentor II SCR control. Present reduction ratio is 13.89:1. Includes integral panel having fourteen (14) zones of temperature control. Dynisco model EH-35 screen changer with 3 HP hydraulic pack is mounted on the extruder discharge. Screen changer S/N EH-35208. Also includes 20 HP melt pump with controls. Unit was updated and the screen changer and melt pump where added 2002.  Overall dimensions are 18′ x 6′ x 103″

  • Array ( [0] => just-arrived [1] => chillers [2] => just-arrived [3] => chillers )
  • Stock#: 17935

    USED MCQUAY 40 TON WATER COOLED CHILLER


    McQuay model WGZ040AA27-ER10 global scroll water cooled chiller. S/N STNV080500269. 40 tons nominal via four ten-ton compressors in two circuits of 25/ 50 /75 unloading steps with remote condenser. 47 lbs. R407C refrigerant each circuit. 2005 model year. Special handling required: spreader bars must be used to prevent damage to the copper tubing in both the chiller unit and condenser during unloading and installation. The procedure is included in the manual. Standard flatbed required for shipment.

  • Array ( [0] => just-arrived [1] => injection-molding [2] => just-arrived [3] => injection-molding )
  • Stock#: 17919

    USED NISSEI NEX100-9E 80 TON INJECTION MOLDER


    One (1) used Nissei model NEX100-9E injection molding machine. Unit has a clamping force of 80 tons and an approximate shot capacity of 3.04 ounces. All electric machine. Tact control. 15.15″ x 15.15″ tie bar spacing. Platens measure 21.45″ x 21.45″. 7.87″-15.15″ mold thickness range. in 2012. Serial Number H08Y376. Manufactured 5/2004. 230/3/60. Used for lab testing of material.

  • Array ( [0] => just-arrived [1] => pelletizers [2] => just-arrived [3] => pelletizers )
  • Stock#: 17908

    USED GALA 5MUP UNDERWATER PELLETIZING SYSTEM


    One (1) used Gala model 5MUP underwater pelletizing system. Includes 2 HP cutter with four (4) blade hub, three (3) spare dies, 40 GPM TWS-40 water system with heater, pump, heater exchanger, 5 HP model 8.2 BF dryer, and non-OEM custom control panel. S/N 8801458

  • Array ( [0] => just-arrived [1] => shredders [2] => just-arrived [3] => shredders )
  • Stock#: 17896

    USED NELMOR 4 SHAFT SHREDDER WITH GRANULATOR


    Nelmor shredder / granulator system consisting of: One (1) Nelmor model V2727 shredder. S/N 8502-22370. 4-shaft shredder with 18 replaceable and sharpen-able cutter inserts per shaft. Powered by a 30 HP 230/460-volt 1765 RPM motor. Cutting chamber is 27.5″ wide x 32″ deep. Insulated in-feed hopper has a 34.5″ x 46″ opening with an in-feed height of 91″. Includes Nelmor model G1220M1 granulator. S/N 8502-22187. 3 knife open rotor with 2 bed knives. Powered by a 20 HP 230/460-volt motor. Has 6″ airveyor discharge and is mounted on casters. Includes single stand alone control panel that operates both the shredder and the granulator. Was used for HDPE blow molded parts.

  • Array ( [0] => just-arrived [1] => pulverizers [2] => just-arrived [3] => pulverizers )
  • Stock#: 17905

    USED PALLMAN PX315 PULVERIZER


    Pallman model PX315 Pulverizer, S/N 15480021, 12″ diameter rotor powered by a 40 HP 460-volt 3545 RPM motor with a scale up factor of 1.0. 20″ long x 4″ wide Eriez model 20A vibratory feeder with metal catcher on 8″ pipe discharge. 5 HP 230/460-volt 3450 RPM New York blower that includes New York model N15P5 silencer. Has Vibco model SCR-200 vibratory unit on hopper. Also includes Flex-Kleen model 84-BVS-16III dust collector with blowback and cyclone that includes .33 HP 208-230/460-volt 1745 RPM airlock. Unitized control panel mounted to machine frame. Excellent for pulverizing medium hard to soft materials. Can produce particles 325-35 mesh

  • Array ( [0] => just-arrived [1] => pelletizers [2] => just-arrived [3] => pelletizers )
  • Stock#: 17907

    USED SHEER BAY SGS-300A 12″ WIDE PELLETIZER


    Sheer Bay Plastics Machinery Model SGS-300-A 12″ strand pelletizer. S/N SA305-003. Dual motor driven by approximate 15 HP rotor motor and 10 HP pull roll motor. 460/3/60 A/C input. Includes 60 knife helical rotor installed. Includes spare sharpened 60 knife rotor as well as the manual and three (3) spare rubber rolls. Good condition.

  • Array ( [0] => just-arrived [1] => extruders-3-5-10 [2] => just-arrived [3] => extruders-3-5-10 )
  • Stock#: 17741

    PTI 4000 4″ 30:1 L/D EXTRUDER


    One (1) used 4″ 30:1 L/D ratio PTI model 4000 extruder having a five (5) zone electrically heated, water cooled (closed loop), vented, and plugged barrel at a 53″ center-line height. Flender model E2HA7 gearbox has a reduction ratio of 11.807:1 and is rated at 150 HP. The gearbox is direct driven out the back end by a 150 HP ABB motor with ABB inverter. Gearbox has an oil pump and heat exchanger. The extruder has a water-cooled feed throat with 4″ x 6″ on center entrance. The temperature control panel has five (5) zones for the barrel and fifteen( 15) zones of temperature controls for die zones. Inverter, temperature panel and 5 HP hydraulic power pack for the screen changer are mounted on the sane base as the extruder. Includes Xaloy model EH-45 hydraulic slide plate screen changer, S/N 740. Extruder S/N 4390/1069. Manufactured 2/2007. 460/3/60 input power



  • Array ( [0] => just-arrived [1] => miscellaneous [2] => just-arrived [3] => miscellaneous )
  • Stock#: 17803

    UNUSED 600 HP 460 VOLT A/C MOTOR


    One (1) unused Marathon Blue Chip severe duty 600 HP A/C motor. 5011L Frame. 460/3/60. Max Safe RPM: 2800. Model: EC5011LNFS16532AA W. Serial Number: WAA031656. Manufactured 3/2007. With tachometer.

  • Array ( [0] => just-arrived [1] => shredders [2] => just-arrived [3] => shredders )
  • Stock#: 178002A

    UNUSED LINDNER KOMET 2800HP SECONDARY SHREDDER


    Unused Lindner model Komet 2800HP single shaft secondary shredder system, 80″ x 111″ opening, 112 cutters, 2 x 250 Kw 400-volt 50 Hz motors

    PRICE: MAKE OFFER

    F.O.B. ORIGIN

  • Array ( [0] => just-arrived [1] => extruders-3-5-10 [2] => pelletizers [3] => pelletizing-lines [4] => just-arrived [5] => extruders-3-5-10 [6] => pelletizers [7] => pelletizing-lines )
  • Stock#: 17899

    USED AET 4.5″ EXTRUDER / PELLETIZING LINE


    One (1) used AET model 45AS32 4.5″ 32:1 L/D extruder having a six (6) zone electrically heated, water cooled (closed loop), and side vented barrel at a nominal 42″ center-line height. The gearbox is direct driven out the back end by a 250 HP Marathon Blue Max motor with inverter. The gearbox has a shaft mounted oil pump and heat exchanger. The extruder has a water-cooled feed throat. The free-standing temperature control panel has six (6) zones for the barrel and three (3) zones of temperature controls for downstream zones. Inverter is mounted inside the control panel. 480/3/60 600 amps. S/N 2448. Manufactured 11-04-04. Includes Nordson/Xaloy model EH-60 hydraulic slide plate screen changer having two (2) nominal 6″ diameter breaker plates, hydraulics, and accumulator.  Also includes Nordson/Xaloy model WRP-12I water ring pelletizing system. Still Installed and running until 7/2022.

  • Array ( [0] => just-arrived [1] => as-is-granulators-30-hp [2] => just-arrived [3] => as-is-granulators-30-hp )
  • Stock#: 17799

    USED BALL & JEWEL VG2257 GRANULATOR


    Ball & Jewel model VG2257 granulator, S/N 03D05432, 22″ x 57″ feed throat, 5 knife open rotor, 2 bed knife (15 pcs rotor, 6 pcs bed), 100 HP 230/460-volt 1785 RPM motor, 8″ OD left hand airveyor discharge, double wall conveyor in-feed hopper, 1/2″ holes screens installed, hydraulic assisted “clam-shell” split chamber for knife changes, no starter or controls included.