Array ( [0] => just-arrived [1] => rebuilt-granulators-35-hp [2] => 75-hp-granulators [3] => just-arrived [4] => rebuilt-granulators-35-hp [5] => 75-hp-granulators )
  • Stock#: 17149

    REBUILT CUMBERLAND 1456i GRANULATOR


    Rebuilt Cumberland model 1456i granulator, S/N 84000VP-07006, 14″ x 56″ feed throat, 3 knife open twin shear rotor, 2 bed knife, no in feed hopper, 75 HP 460 volt 1185 RPM motor, 8″ airveyor discharge, mounted on a common plate base with vibration control pads, starter and controls not included, includes Blades standard 90 day warranty, 3/8″ holes screen installed

  • Array ( [0] => just-arrived [1] => 75-hp-granulators [2] => shredders [3] => just-arrived [4] => 75-hp-granulators [5] => shredders )
  • Stock#: 17280

    USED SSI M55E SHREDDER / CUMBERLAND 1837B SYSTEM PACKAGE


    SSI model M55E two shaft dual-shear shredder, S/N S2455, manufactured 11/2013, low speed and high torque 20-3/4″ x 40-1/2″ cutting chamber with five 3-3/4″ wide and one 1-3/4″ cutters per shaft powered by a inverter duty 25 hp 230/460 volt 1765 rpm motor thru a 69.7:1 gear reducer, includes original OEM control / starter panel

    Cumberland Model 1837B Granulator, S/N 50510-18004, 18″ x 37″ feed throat, 5 knife high shear hard-faced rotor, hard faced cutting chamber, 2 bed knives, 100 HP 460 volt motor, mounted on 22″ tall plate base, 10″ airveyor discharge, includes soft starter control panel, less than 100 hours use on the granulator and starter.

    Also includes, Sterling 9015FV 15 HP blower with heavy duty housing, heavy duty removable outlet, and steel impeller upgrades, 10″ OD inlet & outlet. Sterling #15 cyclone with dual 10″ OD inlets and heavy duty replaceable inlet/upper cone wear liner. Lot of 10″ (FK250) Kongskilde connecting pipe and late model hydraulic gaylord dumper

    Customer choice to include in-feed and take away conveyors (originally used on different in-feed and discharge configurations for the shredder)

    Take away conveyor is 17′ long with a 22″ wide rubber cleated belt, 3″ tall cleats on 30″ centers, 18″ tall side walls, powered by a 1.5 hp 1730 rpm motor thru a 80:1 gear reducer, 5″ diameter head pulley, in- feed conveyor is 13′ long with a 22″ wide rubber cleated belt, 3″ tall x 8″ wide partial cleats on 11″ centers, 12″ tall side-walls, powered by a 1/2 hp 1750 rpm motor thru 125:1 gear reducer, 8″ diameter head pulley, variable speed 460 volt controls (pictures are available of the original shredder and conveyor configuration)


  • Array ( [0] => just-arrived [1] => rebuilt-granulators-35-hp [2] => 75-hp-granulators [3] => just-arrived [4] => rebuilt-granulators-35-hp [5] => 75-hp-granulators )
  • Stock#: 17102

    REBUILT AEC AT5090 GRANULATOR


    Rebuilt AEC model AT5090 granulator, S/N CT036250-15002, 20″ X 36″ feed throat, 3 knife open twin shear steep angle rotor with rotating end disks, 2 bed knives, tangential cutting chamber, 100 HP 230/460 volt motor, insulated tray feed hopper and body panels, 8″ OD airveyor discharge, mounted to common plate base, includes Sterling model 8010FV 10 HP blower with aluminum impeller and sound enclosure and original OEM 460 volt starter / control panel with interlocked blower starter, 2015 model year

  • Array ( [0] => just-arrived [1] => 75-hp-granulators [2] => just-arrived [3] => 75-hp-granulators )
  • Stock#: 17316

    USED CUMBERLAND 2050B GRANULATOR WITH WEAR PACKAGE


    Cumberland model 2050B granulator, S/N 51310-93004, 20″ x 50″ feed throat, 5 knife hard-faced high shear rotor, 2 bed knife, hard-faced cutting chamber and bed shields, replaceable AR400 hardened steel side plates, 150 HP 460-volt 1185 RPM motor, conveyor in-feed hopper, 10″ OD airveyor discharge, mounted to a step base, starter and controls not included

  • Array ( [0] => just-arrived [1] => 15-30-hp-granulators [2] => under-the-press-granulators [3] => just-arrived [4] => 15-30-hp-granulators [5] => under-the-press-granulators )
  • Stock#: 17103

    USED AEC WG1256 THERMOFORMING GRANULATOR


    AEC MODEL WG1256 THERMOFORMING GRANULATOR, S/N 509000-10002, 12″ X 56″ FEED THROAT, 5 KNIFE TWIN SHEAR ROTOR, 2 BED KNIFE, PADDLE WHEEL IN-FEED ASSEMBLY, 30 HP 460 VOLT MOTOR, PNEUMATIC ASSISTED CUTTING CHAMBER OPENER, PADDLES POWERED BY A 2 HP A/C INVERTER DUTY MOTOR, 8″ RIGHT HAND AIRVEYOR DISCHARGE, MOUNTED ON CASTERS, INCLUDES 10 HP BLOWER WITH ALUMINUM IMPELLER AND SOUND ENCLOSURE, STAND ALONE ORIGINAL OEM STARTER / CONTROL PANEL FOR THE GRANULATOR AND 10 HP INTERLOCKED BLOWER, 2010 MODEL YEAR.  PICTURED UPPER PULL ROLLS AND HOPPER NOT INCLUDED

  • Array ( [0] => just-arrived [1] => 75-hp-granulators [2] => feed-paddle-roll-granulators [3] => just-arrived [4] => 75-hp-granulators [5] => feed-paddle-roll-granulators )
  • Stock#: 16612

    USED HERBOLD SMS45/160-H5-2 FEED ROLL GRANULATOR


    HERBOLD MODEL SMS45/160H5-2 GRANULATOR, S/N 3696, 23.5″ X 61″ FEED THROAT, BELT DRIVEN 5 KNIFE OPEN ROTOR, 2 BED KNIFE, 100 HP 230/460 VOLT MOTOR, 6″ DIAMETER X 56″ AMBRITT CRUSHER FEED ROLL IN-FEED, S/N 255-003, POWERED BY A 3 HP A/C 1750 RPM 208-230/460 VOLT MOTOR THRU BOSTON GEAR 24:1 GEARBOX, CHAIN AND SPROCKET DRIVEN, MANUAL FEED ROLL ADJUSTMENT, IN ADDITION TO THE FEED ROLLS THERE IS A 11-3/4″ X 30″ PARTS CHUTE, GRANULATOR CHAMBER IS OPENED VIA 3 HP HYDRAULIC JACK BACK ASSIST, 1 HP MATERIAL AUGER DISCHARGE ASSIST WITH AN OK160 6″ OUTLET, INCLUDES TWO USED SETS OF 20 ROTOR AND 4 BED KNIVES, AND KNIFE ADJUSTING FIXTURE, STARTER AND CONTROLS FOR GRANULATOR AND FEED ROLLS ARE NOT INCLUDED, AVAILABLE WITH OR WITHOUT THE FEED ROLLS

  • Array ( [0] => just-arrived [1] => 75-hp-granulators [2] => just-arrived [3] => 75-hp-granulators )
  • Stock#: 17282

    USED RAPID 2442H GRANULATOR


    Rapid model 2442H granulator, S/N none, 24″ x 42″ feed throat, 5 knife open rotor, dual flywheels, 2 bed knife, 100 HP 230/460 volt 1785 RPM motor, conveyor in-feed hopper with pneumatic tilt back assist, 6″ OD right hand airveyor discharge, mounted on 26″ tall leg base, includes across the line starter and controls

  • Array ( [0] => just-arrived [1] => 75-hp-granulators [2] => just-arrived [3] => 75-hp-granulators )
  • Stock#: 17290

    USED RAPID GK1000 GRANULATOR


    Rapid Model GK1000 granulator, S/N 80.126, 24″ x 42″ feed throat, 5 knife open rotor, 2 bed knife, water cooled cutting chamber, pneumatic assisted side-feed hopper, 8″ airveyor discharge, mounted on frame unitized to a plate with vibration pads, starter and controls not included

  • Array ( [0] => just-arrived [1] => rebuilt-granulators-35-hp [2] => 75-hp-granulators [3] => hog-granulators [4] => recycling [5] => just-arrived [6] => rebuilt-granulators-35-hp [7] => 75-hp-granulators [8] => hog-granulators [9] => recycling )
  • Stock#: 14537

    REBUILT RAPID 2442RS HOG GRANULATOR


    Rebuilt Rapid model 2442RS hog granulator, S/N 85.281, 24″ x 42″ feed throat, 20 knife 24mm bolt staggered hog rotor, 3 bed knife, 125 HP 460 volt motor, dual fly-wheels, pneumatic tilt back assist conveyor feed hopper with guide plate, pneumatic assist drop down screen cradle, 8″ OD airveyor discharge, frame base, includes across the line granulator starter and controls

  • Array ( [0] => just-arrived [1] => 75-hp-granulators [2] => just-arrived [3] => 75-hp-granulators )
  • Stock#: 16599

    USED RAPID 32″ x 50″ (80125) GRANULATOR


    RAPID MODEL 80125 GRANULATOR, S/N 350.4, 32″ X 50″ FEED THROAT, 3 KNIFE OPEN HERRINGBONE V ROTOR, 2 BED KNIFE, BELT DRIVEN ROTOR BY A 150 HP 1780 RPM 460 VOLT MOTOR, TANGENTIAL CUTTING CHAMBER, CONVEYOR IN-FEED HOPPER WITH A 50″ WIDE X 44″ TALL OPENING, DUAL PICK UP 8″ AIRVEYOR DISCHARGE, 3 KW ELECTRIC HOPPER JACK BACK ASSIST, 1 KW ELECTRIC SCREEN CRADLE ASSIST, CHAMBER MOUNTED TO FRAME BASE WITH VIBRATION CONTROL PADS, INCLUDES MODEL 8015FV 15 HP BLOWER WITH STEEL IMPELLER, #10 SIZE CYCLONE WITH 8″ INLET, MISC PIPE AND CLAMPS, AND WALL MOUNT STARTER / CONTROL PANEL FOR GRANULATOR AND BLOWER

  • Array ( [0] => just-arrived [1] => 75-hp-granulators [2] => hog-granulators [3] => recycling [4] => just-arrived [5] => 75-hp-granulators [6] => hog-granulators [7] => recycling )
  • Stock#: 16611

    USED CUMBERLAND 3237 HOG GRANULATOR


    CUMBERLAND MODEL 3237 HOG GRANULATOR, S/N 56200-81001, 32″ X 37″ FEED THROAT, 25 KNIFE HOG ROTOR, 2 BED KNIFE, 200 HP 460 VOLT 1180 RPM MOTOR, DUAL FLY-WHEELS, 10″ OD AIRVEYOR DISCHARGE, MOUNTED ON LEGS TO PLATE BASE, ELECTRIC MOTORIZED JACK ASSIST FOR SCREEN CRADLE AND CUTTING CHAMBER, STARTER AND CONTROLS NOT INCLUDED