-
Stock#: 16845
USED PATTERSON KELLY 10 CUBIC FOOT V-BLENDER
PATTERSON KELLY 10 CUBIC FOOT STAINLESS STEEL V-BLENDER, S/N 27643, MOUNTED ON A STAND WITH A 1.5 HP 1735 RPM 575 VOLT MOTOR, GEARBOX HAS A 21.32:1 REDUCTION RATIO FOR AN OUTPUT OF 82 RPM, MACHINE IS RATED FOR 90 LBS PER CUBIC FOOT MATERIAL DENSITY, 8″ OD OUTLET
-
Stock#: 16815
USED PATTERSON THORO BLENDER SYSTEM
PATTERSON INDUSTRIES 18″ DIAMETER JACKETED THORO BLENDER SYSTEM, S/N 412130-CA11, MAXIMUM WATER PRESSURE IS 125 PSI AT 275 DEGREES, MINIMUM DESIGN METAL TEMPERATURE 32 DEGREES AT 125 PSIG, INCLUDES DELTA THERMAL SYSTEMS MODEL KD331S 12,000 WATT OIL HEATER, S/N 17040, WITH CAGE AND EXHAUST HOOD, ALSO INCLUDES BAUER MODEL DP2.5 AIR COMPRESSOR, 13.5 CFM, 200 PSIG, POWERED BY A 5 HP 480 RPM 230/460 VOLT MOTOR
-
Stock#: 16708
USED CONAIR GB221 2 COMPONENT BLENDER
CONAIR MODEL GB221 2 COMPONENT BLENDER WITH 1 ADDITIVE FEEDER, S/N 83922, 2 PNEUMATIC SLIDE GATES, 1 HP MIXER MOTOR, 2 CONAIR DL12 RECEIVERS, WSB-240TC CONTROLLER, 120 VOLT OPERATION, INCLUDES BUNTING MAGNET AND PRESSURE REGULATOR, 4.4 LB (2KG) BATCH SIZE, 678 LBS (308KG) PER HOUR MAXIMUM THROUGHPUT (MATERIAL TYPE AND BULK DENSITY DEPENDENT, DIMENSIONS: 56″ L X 38″ W X 76″ H, 310 LBS
-
Stock#: 16710
USED CONAIR GB222 2 COMPONENT BLENDER
CONAIR MODEL GB222 2 COMPONENT BLENDER WITH 2 ADDITIVE FEEDERS, S/N 81097, 2 PNEUMATIC SLIDE GATES, 2 CONAIR AUGER FEEDERS WITH HOPPERS, 1 HP MIXER MOTOR, 2 CONAIR DL12 RECEIVERS, WSB-420-CF CONTROLLER, 120 VOLT OPERATION, INCLUDES BUNTING MAGNET AND PRESSURE REGULATOR, 4.4 LB (2KG) BATCH SIZE, 540 LB (245KG) PER HOUR MAXIMUM THROUGHPUT (MATERIAL TYPE AND BULK DENSITY DEPENDENT) DIMENSIONS: 56″ L X 38″ W X 76″ H
-
Stock#: 16712
USED CONAIR GB241 4 COMPONENT BLENDER
CONAIR MODEL GB241 4 COMPONENT BLENDER WITH 1 ADDITIVE FEEDER, S/N 81381, 4 PNEUMATIC SLIDE GATES, 1 MIXER HP MOTOR, 3 UNA-DYN PROTEC RECEIVERS, WSB-231 CONTROLLER, 120 VOLT OPERATION (TWIST LOCK ELECTRICAL PLUG) INCLUDES BUNTING MAGNET AND AIR PRESSURE REGULATOR, 4.4 LB (2KG) BATCH SIZE, UP TO 678 LB (308KG) PER HOUR THROUGHPUT (MATERIAL TYPE AND BULK DENSITY DEPENDENT) DIMENSIONS: 56″ L X 38″ W X 76″ H, 350 LBS
-
Stock#: 16587
USED MAGUIRE WSB-940 4 COMPONENT BLENDER
MAGUIRE MODEL WSB-940 4 COMPONENT BLENDER, UP TO 4,200 LBS PER HOUR CAPACITY (MATERIAL TYPE AND BULK DENSITY DEPENDENT), 2 EACH 3″ X 6″ SLIDE GATES AND 2 EACH 2″ X 3″ SLIDE GATES, MOUNTED ON STAND, VACUUM TAKE OFF, INCLUDES TWO MEDIUM SIZE MATERIAL RECEIVERS AND 100 RECIPE PROGRAMMABLE CONTROLLER
-
Stock#: 16591
USED MAGUIRE WSB-240R BLENDER
MAGUIRE MODEL WSB-240R 4 COMPONENT BLENDER, S/N 102474-1, 110 VOLT OPERATION, 2003 MODEL YEAR, INCLUDES TWO NOVATEC VACUUM LOADERS WITH 1.5″ OD LINE IN, 530 TO 860 LBS PER HOUR MAXIMUM CAPACITY, TWO 2″ X 3″ SLIDE GATES AND TWO 1″ PIVOT VALVE MATERIAL DISPENSERS, INCLUDES 100 RECIPE PROGRAMMABLE BLENDER CONTROLLER
-
Stock#: 16066
USED AEC / STERLING SGB-500-4 BLENDER
STERLING MODEL SGBD-500-4 GRAVIMETRIC BLENDER, S/N 37A0160, 4 COMPONENTS, 500 LBS/HR MAXIMUM THRU-PUT RATE, SLIDE GATE DISPENSING, 4 LB BATCH SIZE, .25 CUBIC FOOT MIXER CAPACITY, MOUNTED ON STAND, 2007 MODEL YEAR, INCLUDES CONTROL PENDANT. FULLY TESTED WORKING CONDITION. (PICTURES COMING SOON)
-
Stock#: 16073
USED AEC / STERLING SGBD-450-4 BLENDER
STERLING MODEL SGB-450-4 GRAVIMETRIC BLENDER, S/N 34A0510, 4 COMPONENTS, 450 LBS/HR MAXIMUM THROUGHPUT RATE, SLIDE GATE DISPENSING, 4 LB BATCH SIZE, .25 CUBIC FOOT MIXER CAPACITY, MOUNTED ON STAND, 2004 MODEL YEAR (7 AVAILABLE – MODEL YEAR VARIES)
-
Stock#: 16072
USED AEC / STERLING SGB-900-4 BLENDER
USED AEC / STERLING MODEL SGB-900-4 GRAVIMETRIC BLENDER, S/N 34B0144, 4 COMPONENTS, 900 LBS/HR MAXIMUM THROUGHPUT RATE, 2004 MODEL YEAR (5 AVAILABLE – MODEL YEAR VARIES)
-
Stock#: 15084
USED PATTERSON 8 QUART VEE BLENDER
USED PATTERSON INDUSTRIES VEE BLENDER, S/N C215240, STAINLESS STEEL VEE LIQUIDS / SOLIDS BLENDING VESSEL, 1/4 HP TUMBLE MOTOR, 3/4 HP MIXING BLADES MOTOR, 8 QUART WORKING CAPACITY, MAXIMUM DENSITY 140 FT 3
-
Stock#: 14337
USED CRAMMER FEEDER / BLENDING HOPPER
USED CRAMMER FEEDER / BLENDING HOPPER, 36″ DIAMETER X 50″ TALL, 5 HP 1780 RPM 460 VOLT MOTOR, BELT DRIVE INTO 20:1 GEARBOX, 10″ SQUARE FLANGE MOUNT, ONE DRAIN PORT, NEEDS CRAMMER SCREW TO BE USED AS A CRAMMER (2 AVAILABLE)
-
Stock#: 4431
USED FOREMOST CLWF-1 GRAVIMETRIC BLENDER
USED FOREMOST GRAVIMETRIC BLENDER, MODEL CLWF-1, S/N 34677, CONSISTS OF 2 HOPPERS, 1 RING COMPRESSOR, AND 1 FMC MAGNETIC FEEDER, MOUNTED ON A FRAME
-
Stock#: 5482
USED CONAIR MCMX3 3 COMPONENT BLENDER
USED CONAIR CONOMIX MODEL MCMX3 3 COMPONENT VOLUMETRIC BLENDER, S/N 7A0527, 115 VOLTS, EACH BIN IS 14″ X 14″ X 18″ STRAIGHT SIDE WITH 13″ 45 DEGREE CONE, SITE GLASS, MATERIAL LEVEL SENSORS, AND MANUAL SLIDE GATES ON EACH BIN, AUGER SIZES ARE 3/4″, 1.5″, AND 2″, APPROXIMATELY 1000 LBS/HR TOTAL CAPACITY (2 AVAILABLE)
-
Stock#: 12336
USED MAGUIRE WSB122R WEIGH SCALE BLENDER
USED MAGUIRE MODEL WSB122R WEIGH SCALE BLENDER, S/N 87627, UP TO FOUR COMPONENTS, 330 TO 450 LBS/HR MAXIMUM THROUGHPUT (150-205 KG/HR), TWO 1.5″ X 3″ SLIDE GATES, TWO VERTICAL VALVES, 60-90 PSI AIR OPERATING PRESSURE, INCLUDES PROGRAMMABLE 100 RECIPE CONTROLLER, 48″ X 34″ X 34″, 225 LBS, HAS LARGER VIRGIN/REGRIND HOPPER, BUT IS MISSING THE TWO SMALL ADDITIVE/COLORANT FEED HOPPERS (SIMILAR TO CURRENT MODEL WSB140R)
-
Stock#: 12634
USED AEC OPTIMUM OL SERIES CONTINUOUS LOSS IN WEIGHT BLENDER
USED AEC OPTIMUM OL SERIES CONTINUOUS LOSS IN WEIGHT BLENDER, S/N 35H0550, 4 COMPONENTS, UP TO 5000 LBS PER HOUR MAXIMUM CAPACITY, ONE 3″, TWO 1″, AND ONE 2″ DIAMETER AUGERS WITH MOTORS AND FEED HOPPERS, HOPPERS HAVE CLEAR VIEW SECTION, INCLUDES 6 COMPONENT INVERTER DRIVE PANEL WITH TOUCH-PAD PROGRAMMABLE RECIPE CONTROLLER
-
Stock#: 14145
USED CONAIR AUTO-WEIGH GB241 GRAVIMETRIC BATCH BLENDER
USED CONAIR MODEL AUTO-WEIGH GB241 GRAVIMETRIC BATCH BLENDER, NO S/N, UP TO 4 COMPONENTS AND ONE ADDITIVE, 678 LBS PER HOUR MAXIMUM THROUGH PUT, INCLUDES 4 CONAIR DL SERIES VACUUM LOADERS WITH CONTROLLERS AND 100 RECIPE MAIN BLENDER CONTROLLER, REQUIRES 80 PSI AIR CONNECTION
-
Stock#: 14607
USED MAGUIRE MLS-580 CLEAR VIEW BLENDER LOADING STATION
USED MAGUIRE MODEL MLS-580 CLEAR VIEW BLENDER LOADING STATION, S/N 70568-01, CONTROLLER FOR UP TO 8 LOADERS (RECEIVERS NOT INCLUDED), 230/3/60 OR 230/1/60 OPERATION
-
Stock#: 14643
USED MAGUIRE WSB921 BLENDER
USED MAGUIRE WSB921 BLENDER, S/N 83427, 9 KG BATCH, 2 MAIN COMPONENT HOPPERS UP TO 3000 LBS PER HOUR AND ONE MPL-A AUGER ADDITION FEEDER WITH CONTROL, 4 SLIDE GATES, INCLUDES MODEL 100 RECIPE CONTROLLER, MOUNTED ON GAYLORD HEIGHT STAND
-
Stock#: 14334
USED CRAMMER FEEDER / BLENDING HOPPER
USED CRAMMER FEEDER / BLENDING HOPPER, 36″ DIAMETER, 50″ TALL, 3 HP 1785 RPM 460 VOLT MOTOR, DIRECT DRIVE INTO 10:1 GEARBOX, 10″ SQUARE FLANGE MOUNT, ONE DRAIN PORT, NEEDS CRAMMER SCREW TO BE USED AS A CRAMMER (5 AVAILABLE)