-
Stock#: 18014
USED DYNACON 12″ X 9″ HORIZONTAL CONVEYOR
Dynacon model QS12INTVSM conveyor. S/N 519175. 12″ wide x 9′ long flat horizontal belt powered by a 120/1/60 motor. Approximate 31″ from floor belt height. Includes controls and power cord with plug.
-
Stock#: 17764
USED CRIZAF AUTOMATION 18″ X 13′ INCLINE CONVEYOR
Crizaf Automation model L1.18-13 incline conveyor, S/N CE3116, 18″ wide x 13′ long rough surface belt, chain driven by a 1/4 HP 115-volt motor, 17″ in-feed height, 40″ discharge height, 2.5″ tall side rails, on / off controls switch
-
Stock#: 17763
USED CRIZAF AUTOMATION 24″ X 10′ INCLINE CONVEYOR
Crizaf Automation model L1.24-10 incline conveyor, S/N CE3115, 24″ wide x 10′ long rough surface belt, chain driven by a 1/4 HP 115-volt motor, 15″ in-feed height, 42″ discharge height, 2.5″ tall side rails, on / off controls switch
-
Stock#: 17778
USED MAC 10.5″ X 12′ HORIZONTAL CONVEYOR
MAC Conveyors 10.5″ wide x 12′ long horizontal conveyor, S/N HI-00146-0592, 24″ tall belt height, 3/4″ tall cleats on 15″ centers, 3.5″ side walls, last 4′ can be adjusted to a slight incline. Includes motor, but no controls.
-
Stock#: 17780
USED MB CONVEYOR “Z” STYLE CONVEYOR
MB Conveyors “Z” style conveyor, 10″ top of belt from floor in-feed section 36″ long, vertical angle rise is 108″ long to 20″ long horizontal section at a 92″ discharge height. Belt is 13″ wide with 1.5″ tall cleats on 15″ centers, 3.5″ sidewalls, includes motor built into the head pulley, no controls included.
-
Stock#: 17781
USED MB CONVEYORS “Z” STYLE CONVEYOR
MB Conveyors “Z” style conveyor, 10″ top of belt from floor in-feed section 45″ long, vertical angle rise is 116″ long to 15″ long horizontal section at a 69″ discharge height. Belt is 16″ wide with 1.5″ tall cleats on 15.5″ centers. Includes motor built into the head pulley (broken mounting bracket, Pictured controls are not included.
-
Stock#: 17723
ENSIGN 6′ LONG 4″ OD AUGER CONVEYOR
Ensign Equipment Co. model D2636 auger conveyor, S/N 14735, 4″ OD auger in 5″ OD core on 60 degree incline and a discharge height of 72″, 12″ x 12″ feed opening, rated for 150 cubic feet per hour delivery rate (5,000 lbs / hour @ 33 lbs cubic feet), auger is powered by a 2 HP 230/460-volt 3-phase motor.
-
Stock#: 17603
USED 20″ X 35′ SPRAY CONVEYOR BELT
Used stainless steel water spray/air cooling belt 20″ wide x 35′ long Includes an AC motor with VFD drive.
-
Stock#: 17212
USED 6″ STAINLESS STEEL SUPER FLO DRAG CONVEYOR
Screw Conveyor Corporation 6″ T304 stainless steel constructed Super-Flo drag conveyor for wet material applications, 45 degree traverse bend section with a 6′-5″ long horizontal section and a 4′-4″ long inclined section designed for 80 cubic feet per hour of polyethylene, 3/8″ granules at 100 feet per minute. Powered by a 2 HP 230/460-Volt, 1,750 RPM motor geared for 73 RPM output.
-
Stock#: 15004
USED NEW LONDON 14′ X 24″ CONVEYOR
New London Engineering model 200-24-14′ 6″ conveyor, S/N 02-64734, 14′ 6″ long x 24″ wide flat smooth belt conveyor (no cleats), powered by a 1 HP 230/460-Volt motor, includes aperture style advanced detection systems metal detector with a 4″ x 24″ aperture opening, conveyor legs are missing.
-
Stock#: 12454
USED LAROSS-520SHWV-30-90-36 WATER BATH COOLING CONVEYOR
Laros model S-520SHWV-30-90-36 water bath cooling conveyor, s/n 520651-974200, 30″ wide belt with approximately 3″ tall parts spikes, flat belt section under multiple sprayers which then inclines to a 43″ discharge height, conveyor is driven by a 90-Volt DC motor, 1/2 HP water pump pump motor with 115/230V/1ph/60Hz operation. W water is cooled via heat exchanger, stainless steel body, rubber belt.
-
Stock#: 12758
USED DORNER 2.75″ X 8′ CONVEYOR
Dorner 4100 series conveyor, S/N 198078, model 691124, driven by a 1/2 HP 90-Volt DC motor thru gearbox, 8′ long 2.75″ wide flat belt set 43.5″ top of belt height on adjustable height caster stand, includes two mounted air knives for parts cooling, one 37″ long and 25″ long on the other, complete with controls.