Array ( [0] => extruders-twin-screw [1] => extrusion-miscellaneous [2] => extruders-twin-screw [3] => extrusion-miscellaneous )
  • Stock#: 17792

    USED 92MM CENTURY EXTRUDER ELEMENTS


    (1) Lot of (26) assorted 92MM individual Century screw elements (not pairs). Includes kneading elements, conveying elements reported to be of a proprietary material consisting of high Vanadium with chromium. High wear with mid-level corrosive resistance. 59-62 Rockwell.

    Elements that are included are as follows:
    (6) 8092 60.21 120/120
    (3) 8092 60.25 405/080
    (11) 8092 60.26 905/080
    (2) 8092 60.26 080/080
    (2) 8092 60.21 040/040
    (2) 8092 60.21 180/090

  • Array ( [0] => extrusion-miscellaneous [1] => lab-testing-equipment [2] => extrusion-miscellaneous [3] => lab-testing-equipment )
  • Stock#: 17720

    USED BRABENDER PL2000 PLASTICORD RHEOMETER


    Used Brabender Model PL2000 Plasticorder rheometer system. Drive type DR-2070-0254/PE. 7.5 HP. Includes six (6) temperature control panel, operator controls and type R.E.E. 6 mix head

  • Array ( [0] => extrusion-miscellaneous [1] => extrusion-miscellaneous )
  • Stock#: 17862

    USED BROWN 56″ WIDE SHEET CUTTER


    Used 56″ wide Brown sheet cutter. S/N 33171. New 2005. Has gear-head score cut cross cut slitting blade and manually adjusted blade carriage.

  • Array ( [0] => extrusion-miscellaneous [1] => extrusion-miscellaneous )
  • Stock#: 17790

    USED CMS CB61224 COOLING BELT


    One (1) used CMS model CB61224 cooling belt measuring 23 ½” wide x nominal 61″ long. Two spring loaded chrome rolls with rotary unions feed the stainless steel cooling belt. Discharge has a pin bat for breaking up the cooled product. Last used on powder coating. Includes controls. Serial number 4782. 575 volts.

  • Array ( [0] => extruders-twin-screw [1] => extrusion-miscellaneous [2] => extruders-twin-screw [3] => extrusion-miscellaneous )
  • Stock#: 17791

    USED COPERION 377KW 92mm TWIN SCREW EXTRUDER GEARBOX


    Used Coperion 377KW twin screw “Super” gear reducer with a 3.8:1 reduction. Model No. 177-907-007-58-1; Type: ZSK-92-SC. Intended for use with a 92mm Coperion co-rotating twin screw extruder. Reported 7700 Newton meters torque capacity per shaft.

  • Array ( [0] => extrusion-miscellaneous [1] => extrusion-miscellaneous )
  • Stock#: 17812

    USED COROTEC CPT-20 CORONA TREATER


    One (1) used Corotec model CR104-PE 56″ wide corona treater. S/N T-15974-04-10. Unit has individual sliding fingers that adjust up to a 50″ wide treater width. With 2 Kw high voltage transformer and model CPT-20 controls. Job number T-15974. 240/1/60 input. Rated at 120 FPM

  • Array ( [0] => extrusion-miscellaneous [1] => extrusion-miscellaneous )
  • Stock#: 17813

    USED LOT OF 2.5″ & 3.5″ STATIC MIXERS


    One (1) lot of transfer piping and static mixers, one 2.5″ and one 3.5″

  • Array ( [0] => extrusion-miscellaneous [1] => lab-testing-equipment [2] => extrusion-miscellaneous [3] => lab-testing-equipment )
  • Stock#: 17719

    USED BRABENDER PL2100 PLASTICORDER RHEOMETER SYSTEM


    Used Brabender Model PL2100 plasticorder rheometer system. Drive type DR-2072/PE. 7.5 HP. Model Poly Speed 04440/PE. Includes controls, temperature control panel and a 1.25” 24:1 L/D extrusion head with stand, die and feeder. 230/3/60 input. Rheometer is mounted on a cart.

  • Array ( [0] => extrusion-miscellaneous [1] => lab-testing-equipment [2] => extrusion-miscellaneous [3] => lab-testing-equipment )
  • Stock#: 17716

    USED BRABENDER PL2000 PLASTICORD RHEOMETER


    Used Brabender Model PL2000 Plasticord rheometer. Drive type DR-2072-L63. 7.5 HP. Model Poly Speed 0220/PE . Includes six (6) temperature control panel and operator controls. S/N 409

  • Array ( [0] => extrusion-coating-foam [1] => extrusion-miscellaneous [2] => lab-testing-equipment [3] => extrusion-coating-foam [4] => extrusion-miscellaneous [5] => lab-testing-equipment )
  • Stock#: 17715

    USED BF PERKINS 2 ROLL CALENDAR ROLL MILL


    One(1) used B.F. Perkins laboratory two roll calendar having two(2) 13″ face x nominal 10″ diameter rolls mounted in a vertical arrangement. One roll is rubber covered while the other is chrome plated. Rolls are variable speed and electrically heated. With controls. Very clean. Serial number H-7642-88.

  • Array ( [0] => blown-film-lines [1] => extrusion-miscellaneous [2] => blown-film-lines [3] => extrusion-miscellaneous )
  • Stock#: 17243

    USED 14″ 3 LAYER BLOWN FILM DIE


    One (1) used 14″ three layer blown film die package mounted on a rotating die cart. Last used with one (1) 3.5″ and two (2) 2.5″ extruders. Includes melt pipes adapters and dual lip air ring. 0.090″ die gap, 13.822″ diameter die.

  • Array ( [0] => extrusion-miscellaneous [1] => extrusion-sheet-dies [2] => extrusion-miscellaneous [3] => extrusion-sheet-dies )
  • Stock#: 17045

    USED CO-EX IN-FEED BLOCK


    Used co-ex infeed block, 3″ OD sheet die hole, 1.5″ OD die hole size.

  • Array ( [0] => extrusion-miscellaneous [1] => extrusion-roll-stacks-rolls [2] => extrusion-miscellaneous [3] => extrusion-roll-stacks-rolls )
  • Stock#: 16936

    USED JOHNSON 8″ X 30 TWO ROLL PULL ROLL STAND


    Johnson two roll pull roll stand driven by a “Drive-All” 3HP DC motor and gearbox. Pull rolls operate at 1.0, 2.07, 5.058, and 10.651:1 ratios. Pull rolls are 8″ diameter x 30″ wide and have not been used since recovering pull rolls have pneumatic pinch. Includes air accumulation tank.

  • Array ( [0] => extrusion-miscellaneous [1] => extrusion-miscellaneous )
  • Stock#: 16809

    USED 2″ PIPE / TUBING DIE


    2″ pipe tubing die.

  • Array ( [0] => extrusion-miscellaneous [1] => vacuum-pumps [2] => extrusion-miscellaneous [3] => vacuum-pumps )
  • Stock#: 16282

    USED TUTHILL LIQUID RING VACUUM PUMP


    Tuthill vacuum systems liquid ring vacuum pump, S/N 240745, 3HP 208-230/460-Volt motor, wire for 230V operation with starter. Kinney high vacuum pump model 4020-3T3-B-V, manufactured in 2010.

  • Array ( [0] => extrusion-miscellaneous [1] => extrusion-miscellaneous )
  • Stock#: 16190

    USED 4″ CROSS-HEAD DIE


    One 4″ cross head die previously used on a 6″ extruder die. Unit is electrically heated and currently mounted on adjustable base. It includes a 6″ extruder adapter.

  • Array ( [0] => extrusion-cast [1] => extrusion-miscellaneous [2] => lab-testing-equipment [3] => extrusion-cast [4] => extrusion-miscellaneous [5] => lab-testing-equipment )
  • Stock#: 15083

    USED VETAPHONE CORONA PLUS CP1 1KW GENERATOR


    Vetaphone Corona Plus generator model CP1 1kW. Includes TF415 control and model HP1014C300 static unit, S/N 614600.

  • Array ( [0] => used-equipment [1] => extrusion-miscellaneous [2] => used-equipment [3] => extrusion-miscellaneous )
  • Stock#: 14719

    USED RELIANCE V.S. SERIES SCR MODEL 801429-129C


    Reliance VS series SCR model 801429-129C 300HP drive in free standing panel.

  • Array ( [0] => extrusion-miscellaneous [1] => extrusion-miscellaneous )
  • Stock#: 6866

    USED PTI “S” WRAP 50″ PULL ROLL


    Used 50″ wide PTI model SWU “S” wrap pull roll assembly. Manufactured in September of 2006. Unit has two (2) 24″ OD x 50″ wide rubber pull rolls that are air cylinder actuated and independently driven with individual gear head motors. The top roll is equipped with a 6″ OD rubber nip roll stand. S/N 4272/930.

  • Array ( [0] => used-equipment [1] => extrusion-miscellaneous [2] => used-equipment [3] => extrusion-miscellaneous )
  • Stock#: 12803

    DAVIS STANDARD COOLING TANK


    Davis Standard cooling tanks, no S/N. Stainless steel construction. Measures 48″ x 24″ x 16″. Unit includes a pressure gauge, level meter, and pressure relief valve. Manufactured in January 2011. Never been used.