Array ( [0] => 0-10-hp-granulators [1] => lab-testing-equipment [2] => 0-10-hp-granulators [3] => lab-testing-equipment )
  • Stock#: 17527

    USED RAPID GK158K LAB GRANULATOR


    Rapid model GK158K lab granulator, S/N 10.2796, 4″ x 6″ feed throat, 2 knife rotor, 2 bed knife, top hand feed hopper, 2 HP 380-440-volt motor that is wired 460-volts, 1/4″ holes screen installed, bin discharge, grinder mounts inside sound suppression cabinet which is on casters, complete with starter and controls, manufactured in 1989, Very good condition

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => 0-10-hp-granulators )
  • Stock#: 17525

    USED CONAIR CR-69 GRANULATOR


    Conair model CR-69 granulator, S/N RA-250.67350.3, 6″ x 9″ feed throat, 9 knife staggered rotor, 2 bed knife, 2.55 Kw (3 HP) 230/460-volt 1140 RPM motor, Robot / Hand in-feed hopper, 2″ OD vacuum take off discharge, on casters, complete with starter and controls, wired 460-volts

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => lab-testing-equipment [2] => 0-10-hp-granulators [3] => lab-testing-equipment )
  • Stock#: 17523

    USED CONAIR CR-66 GRANULATOR


    Conair model CR-66 granulator, S/N RA-260.65194.2, 6″ x 6″ feed throat, 6 knife staggered rotor, 2 bed knife, 2.55 Kw (3 HP) 460-volt 1140 RPM motor, Robot / Hand in-feed hopper, 2″ OD vacuum take off discharge, on casters, complete with starter and controls

    3 Available

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => lab-testing-equipment [2] => 0-10-hp-granulators [3] => lab-testing-equipment )
  • Stock#: 12707

    USED CUMBERLAND SIZE ZERO LAB GRANULATOR


    Cumberland model size zero (0) granulator, S/N 8925-55. 4.5″ x 5.5″ feed throat, 3 knife rotor, 2 bed knife, 3HP 115/220V single phase motor. Direct drive rotor tray feed hopper bin discharge, mounted on a 22″ x 28″ caster base. Complete with starter and controls..

    Two machines are available. The other unit is a 2HP 230/460V/3ph/60Hz configuration.

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => lab-testing-equipment [2] => 0-10-hp-granulators [3] => lab-testing-equipment )
  • Stock#: 12432

    USED GETECHA MODEL SRS100 A2 LAB GRANULATOR


    Getecha model SRS100 A2 laboratory granulator, S/N 15339.6. 60mm x 80mm (2.362″ x 3.149″) feed throat, 100mm (3.937″) cutting diameter and length 4.5mm round and angled perforation screen. 220 RPM rotor speed powered by a 0.63kW 265/460V motor. Stainless steel 2″ ID infeed chute. Mounted on casters. Manufactured in January, 2006.

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => lab-testing-equipment [2] => 0-10-hp-granulators [3] => lab-testing-equipment )
  • Stock#: 5247

    USED WANNER-TECHNIK MODEL 14.13-EZ-SS-FI LABORATORY SIZE GRANULATOR


    Wanner-Technik model 14.13-EZ-SS-FI laboratory style granulator, S/N 2926. 3 knife open rotor, 2 bed knives, 3HP 220/380V motor @ 50Hz, 3-phase. 140mm x 130mm (5″ x 6″) feed throat, top feed hopper, 2″ ID vacuum take off. Mounted on removable casters for bench mounting. Complete with starter and controls.

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => 0-10-hp-granulators )
  • Stock#: 4531

    UNUSED CUMBERLAND MODEL 68 ROBOT FEED GRANULATOR


    New Cumberland 6 x 8 robot feed hopper granulator, S/N 42600-98005. 16 segment knife rotor, 2 bed knives, 1/4″ hole screen, 1.5HP 480V motor. Bin discharge, mounted on casters, complete with starter and controls.

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => as-is-granulators-0-25-hp [2] => 0-10-hp-granulators [3] => as-is-granulators-0-25-hp )
  • Stock#: 16229

    USED AUTOGRIND MODEL 617 GRANULATOR


    Autogrind model 617 granulator, 6″ x 17″ feed throat, 18 knife staggered rotor, 2 bed knives. Approximate 3HP 460V motor. 6″ x 17″ top hand, robot in-feed, 2″ OD vacuum take off discharge. Mounted on a caster base, complete with starter and controls. 5/16″ screen installed.

    Price: $1,250.00, as is, running.

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => 0-10-hp-granulators )
  • Stock#: 16116

    USED RAPID MODEL 79K GRANULATOR


    Rapid model 79K granulator, S/N 20.2279. 7″ x 9″ feed throat, 3 knife slant cut open rotor, 2 bed knife, 5HP 230/460V motor. Insulated tray feed hopper, insulated body panels, bin discharge. Mounted on casters, complete with starter and controls.

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => 0-10-hp-granulators )
  • Stock#: 10928

    USED RAPID MODEL 79K GRANULATOR


    Rapid model 79K granulator, S/N 20.5244. 7″ x 9″ feed throat, 3 knife slant cut open rotor, 2 bed knives, 5HP 230/460V motor, insulated tray feed hopper, insulated body panels, bin discharge. Mounted on casters, complete with starter and controls.

    Three machines are available.

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => 0-10-hp-granulators )
  • Stock#: 16260

    USED NELMOR MODEL G810M1 GRANULATOR


    Nelmor model G810P1 granulator, S/N 9401-34123. 8″ x 10″ feed throat, 3 knife solid rotor, 2 bed knife, 3HP 208-230/460V motor. Double wall tray feed hopper, bin discharge, mounted on casters, complete with starter and controls.

    28 machines are available.

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => 0-10-hp-granulators )
  • Stock#: 16628

    USED NELMOR MODEL G810M1 GRANULATOR WITH PROFILE CHUTE


    Nelmor model G810M1 granulator, S/N 7205-4995. 8″ x 10″ feed throat, 3 knife solid rotor, 2 bed knife cutting chamber, 5HP 230/460V motor. Double wall tray feed hopper, with right hand 3.5″ x 3.5″ profile chute bin discharge, mounted on casters, complete with starter and controls.

    Two machines are available.

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => 0-10-hp-granulators )
  • Stock#: 16881

    USED BALL & JEWEL MODEL BP18 GRANULATOR


    Ball & Jewel model BP18 granulator, S/N 9502-34591. 8″ x 10″ feed throat, 3 knife open rotor, 2 bed knife, 5HP 230/460V motor. Single wall tray feed hopper, bin discharge, mounted on casters, complete with starter and controls. Manufactured in February, 1995.

    Three machines are available.

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => 0-10-hp-granulators )
  • Stock#: 14972

    USED NELMOR MODEL G810M1 GRANULATOR


    Nelmor model G810M1 granulator, S/N unreadable. 8″ x 10″ feed throat, 2 knife open rotor, 2 bed knife, 5HP 460V motor. Double wall tray feed hopper, bin discharge, mounted on casters, complete with starter and controls.

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => 0-10-hp-granulators )
  • Stock#: 16119

    USED NELMOR MODEL RG810P1 GRANULATOR


    Nelmor model RG810P1 granulator, S/N 9308-32503. 8″ x 10″ feed throat, 3 knife solid rotor, 5HP 230/460V motor. Insulated tray feed hopper and body panels, bin discharge, mounted on casters, complete with starter and controls.

    Seven machines are available.

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => 0-10-hp-granulators )
  • Stock#: 14978

    USED NELMOR MODEL RG810M1 GRANULATOR


    Nelmor model RG810M1 granulator, S/N 8609-24124. 12″ x 20″ feed throat, 2 knife open rotor, 2 bed knife, 5HP 230/460V motor. Double wall tray feed hopper, bin discharge, mounted on casters, complete with starter and controls.

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => 0-10-hp-granulators )
  • Stock#: 14301

    USED NELMOR MODEL RG810M1 GRANULATOR


    Nelmor model RG810M1 granulator, S/N 9307-33501. 8″ x 10″ feed throat, 5 knife solid rotor, 2 bed knife, 5HP 230/460V motor. Double wall tray, conveyor feed hopper, and insulated body panels, bin discharge, mounted on casters, complete with starter and controls.

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => 0-10-hp-granulators )
  • Stock#: 10723

    USED CUMBERLAND MODEL 184 GRANULATOR


    Cumberland model 184 granulator, S/N 239150-80105. 8″ x 10″ feed throat, 2 knife rotor, 2 bed knife, 5HP 230/460V motor. Insulated tray feed hopper and body panels, bin discharge, mounted on casters. Complete with starter and controls.

    Two machines are available.

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => 0-10-hp-granulators )
  • Stock#: 6508

    USED BALL & JEWEL MODEL MD812X GRANULATOR


    Ball & Jewel model MD812X granulator, S/N 4298- 55184. 8″ x 12″ feed throat, 3 knife open rotor, 2 bed knife cutting chamber, 7.5HP 460V motor tray feed hopper, bin discharge, mounted on casters, complete with starter and controls.

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => 0-10-hp-granulators )
  • Stock#: 10726

    USED POLYMER MODEL 912SP GRANULATOR


    Polymer model 912SP granulator, S/N 912267SP. 9″ x 12″ feed throat, 2 knife solid rotor, 1 bed knife cutting chamber, 7.5HP 230/460V motor. Tray feed hopper, bin discharge, mounted on casters, complete with starter and controls.

    Five machines are available.

    Add to QuoteDetails