Array ( [0] => 15-30-hp-granulators [1] => 15-30-hp-granulators )
  • Stock#: 17467

    USED WHITAKER (CUMBERLAND) 1218X GRANULATOR


    Whitaker (Cumberland) model 1218X granulator, S/N CA093600A-135001, 12″ X 18″ feed throat, 3 knife open rotor, 2 bed knife, 25 HP 460-volt motor, insulated tray feed hopper & body panels, 4″ OD right hand airveyor discharge, complete with starter and controls

  • Array ( [0] => 15-30-hp-granulators [1] => 15-30-hp-granulators )
  • Stock#: 17377

    USED CONAIR MODEL 1420 GRANULATOR


    Conair model 1420-201-02 granulator, S/N 1420-3986, 14″ x 20″ feed throat, 3 knife open rotor, 2 bed knife, 15 HP 230/460-volt motor, insulated tray feed hopper and body panels, airveyor discharge, complete with stand alone starter and control panel. Weighs approximately 1,880 Lbs.

  • Array ( [0] => 15-30-hp-granulators [1] => 15-30-hp-granulators )
  • Stock#: 17373

    USED CUMBERLAND MODEL 484 GRANULATOR WITH HARD FACING


    Cumberland model 484 granulator, S/N 421000-94010, 14″ x 16″ feed throat, 3 knife open slant cut rotor with hard facing, 2 bed knife, hard faced cutting chamber, insulated tray feed hopper and body panels, 15 HP 230/460-volt motor, bin discharge, on casters, complete with starter and controls

  • Array ( [0] => 15-30-hp-granulators [1] => 15-30-hp-granulators )
  • Stock#: 17366

    USED CONAIR MODEL CW1834 GRANULATOR


    Conair model CW1824 granulator, S/N RA-490.67092.001, 18″ x 24″ feed throat, 3 knife open rotor, 2 bed knife, 25 HP 460-volt motor, super tangential cutting chamber, insulated tray feed hopper with electronic jack back assist, insulated body panels, 6″ left hand airveyor discharge. Mounted on vibration control pads. Complete with OEM starter and controls.

  • Array ( [0] => 15-30-hp-granulators [1] => 15-30-hp-granulators )
  • Stock#: 14360

    USED CUMBERLAND MODEL 18C GRANULATOR


    Cumberland model 18C granulator, S/N unreadable. 5″ x 18″ feed throat, 5 knife radial rotor, 2 bed knife approximately 30HP 460V 1,200 RPM direct drive motor. Includes in-feed hopper. Started and controls are not included. Weight is approximately 3,000 lbs.


  • Array ( [0] => 15-30-hp-granulators [1] => 15-30-hp-granulators )
  • Stock#: 10617

    USED CONAIR MODEL CHS819 GRANULATOR


    Conair model CHS819 granulator, S/N 390.58519.1. 8″ x 19″ feed throat, 3 knife open rotor, 2 bed knife cutting chamber, 15HP 230/460V motor. Insulated conveyor feed hopper with 4″ x 4″ left hand profile chute bin discharge. Mounted on casters, complete with starter and controls. Manufactured by Rapid Granulator in 2004.

  • Array ( [0] => 15-30-hp-granulators [1] => 15-30-hp-granulators )
  • Stock#: 5487

    USED RAPID MODEL 1012K GRANULATOR


    Rapid model 1012K granulator, S/N 100.1699. 10″ x 12″ tangential feed throat, 3 knife open rotor, 2 bed knife. 15HP 230/460V motor, tray feed hopper, sound package, 4″ OD airveyor discharge. Mounted on casters, complete with starter and controls. 1988 model year.

    Eight machines are available.

  • Array ( [0] => 15-30-hp-granulators [1] => 15-30-hp-granulators )
  • Stock#: 14279

    USED RAPID MODEL 1012KB GRANULATOR


    Rapid model 1012KB granulator. S/N 100.2954. 10″ x 12″ feed throat, 3 knife open rotor, 2 bed knife. 15HP 230/460V motor. Rear facing KB style insulated conveyor feed hopper. 1.5HP side mounted PB-10 blower discharge, insulated body panels. Mounted on casters. Complete with starter and controls.

  • Array ( [0] => 15-30-hp-granulators [1] => 15-30-hp-granulators )
  • Stock#: 6687

    USED CUMBERLAND #2 GRANULATOR


    Cumberland size 2 granulator, S/N 25960-7114-R. 10″ x 12″ feed throat, 2 knife open rotor, 2 bed knife, 30HP 460V motor, feed hopper mounted on gravity discharge drum base. Complete with starter and controls.

  • Array ( [0] => 15-30-hp-granulators [1] => 15-30-hp-granulators )
  • Stock#: 14580

    USED POLYMER MODEL 1116SPL GRANULATOR


    Polymer model 1116SPL granulator. S/N 11162A381. 11″ x 16″ feed throat, 2 knife open rotor, 1 bed knife. 15HP 460V motor. Tray feed hopper bin discharge. Mounted on casters, complete with starter and controls.

  • Array ( [0] => 15-30-hp-granulators [1] => 15-30-hp-granulators )
  • Stock#: 8160

    USED FOREMOST MODEL HD4 GRANULATOR


    Foremost HD4 granulator. S/N None. 11″ x 28″ feed throat with sheet feed hopper. 2 knife hook fly open rotor, 2 bed knife cutting chamber. Dual 15HP motors, bin discharge, complete with starter.

  • Array ( [0] => 15-30-hp-granulators [1] => 15-30-hp-granulators )
  • Stock#: 10491

    USED CUMBERLAND MODEL 1212 GRANULATOR


    Cumberland model 1212 granulator. S/N 293000-00511. 12″ x 12″ feed throat, 3 knife open rotor, 2 bed knife. 20HP 230/460V motor. Conveyor hopper, 4″ right hand airveyor discharge. Mounted on casters, complete with starter and controls.

  • Array ( [0] => 15-30-hp-granulators [1] => 15-30-hp-granulators )
  • Stock#: 14712

    USED NELMOR MODEL G1215P1 GRANULATOR


    Nelmor model G1215P1 granulator. S/N 9108-30837. 12″ x 15″ feed throat, 3 knife open rotor, 2 bed knife, 20HP 460V motor. Double wall tray feed hopper bin discharge with vacuum take off. Mounted on casters, complete with starter and controls.

    Over 30 machines are available in the 3 knife solid and open rotor configuration with either a 10, 15, or 20HP motor.

  • Array ( [0] => 15-30-hp-granulators [1] => 15-30-hp-granulators )
  • Stock#: 14780

    USED NELMOR MODEL G1215M1 GRANULATOR


    Nelmor model G1215M1 granulator. S/N 8905-29045. 12″ x 15″ feed throat, 3 knife solid rotor, 2 bed knife, 20HP 230/460V motor. Hard faced cutting chamber, double wall tray feed hopper bin discharge. Mounted on casters, complete with starter and controls.



  • Array ( [0] => 15-30-hp-granulators [1] => 15-30-hp-granulators )
  • Stock#: 14416

    USED NELMOR MODEL G1215M1 GRANULATOR


    Nelmor model G1215M1 granulator. S/N 9004-29761. 12″ x 15″ feed throat, 2 knife open rotor, 2 bed knife, 15HP 208-230/460V motor. Single wall tray feed hopper. Nelmor model F410, side mounted, 1HP swing out blower. Discharged with a 4″ outlet and aluminum impeller. Mounted on casters, complete with starter and controls for the blower and granulator.

  • Array ( [0] => 15-30-hp-granulators [1] => 15-30-hp-granulators )
  • Stock#: 5179

    USED NELMOR MODEL RG1215P1 GRANULATOR


    Nelmor model RG1215P1 granulator. S/N 9201-30288. 12″ x 15″ feed throat, 3 micro knife solid rotor, 2 bed knife. 15HP 230/460V motor. Sound suppressing package, tray feed hopper, bin discharge. Mounted on casters, complete with starter and controls.

    Two machines are available.

  • Array ( [0] => 15-30-hp-granulators [1] => 15-30-hp-granulators )
  • Stock#: 5284

    USED NELMOR MODEL RG1215M1 GRANULATOR


    Nelmor model RG1215M1 granulator. S/N None. 12″ x 15″ feed throat, 2 knife open rotor, 2 bed knife. 10HP 230/460V motor, insulated tray feed hopper and body panels, bin discharge. Mounted on casters, complete with starter and controls.

  • Array ( [0] => 15-30-hp-granulators [1] => 15-30-hp-granulators )
  • Stock#: 12439

    USED SPROUT-BAUER MODEL DSF1512 FILM GRANULATOR


    Sprout-Bauer model DSFf1512 film granulator. No S/N. 12″ x 15″ feed throat 7 knife open rotor, 2 bed knife, 20HP 230/460V motor. Insulated tray feed hopper with 10″ OD top blow in, 4″ right hand airveyor discharge. Mounted on a frame base. Includes starter and controls.

  • Array ( [0] => 15-30-hp-granulators [1] => 15-30-hp-granulators )
  • Stock#: 4645

    USED BALL & JEWEL MODEL CG1216CSX GRANULATOR


    Ball & Jewell model CG1216CSX granulator. S/N 5868-102438. 12″ x 16″ feed throat, 3 knife open rotor, 2 bed knife. 15HP 230/460V motor. Sound suppressed cabinet, bin discharge, tray feed hopper with center clean out door. Complete with starter and controls.

    Two machines are available.

  • Array ( [0] => 15-30-hp-granulators [1] => 15-30-hp-granulators )
  • Stock#: 14786

    USED GRANUTEC MODEL TFG1216.5 GRANULATOR


    Granutec model TFG1216.5 granulator. S/N 308-4696. 12″ x 16″ feed throat, 3 knife open rotor, 2 bed knife. 15HP 230/460V motor. Insulated tray feed hopper, insulated body panels, 2″ OD vacuum take off discharge. Mounted on casters with front and rear forklift rail entry. Complete with starter and controls.