Array ( [0] => just-arrived [1] => 75-hp-granulators [2] => as-is-granulators-30-hp [3] => just-arrived [4] => 75-hp-granulators [5] => as-is-granulators-30-hp )
  • Stock#: 17336

    USED GRANUTEC TFG2048-100 GRANULATOR


    Granutec model TFG2048-100 granulator having a 20″ x 48″ throat opening with tangential cutting chamber. Three (3) knife open rotor is belt driven by a 100 HP 460-volt 1185 RPM motor. Two (2) bed knives. Insulated tray feed hopper with a 21″ x 48″ opening. Granulator and controls are mounted on a base plate with fork lift rails. Set up for a 6″ OD right hand airveyor discharge. Discharge is via a Sterling model 6005FV blower with 5 HP motor and steel reinforced impeller. Blower discharges into a Kongskilde model RC20 cyclone with four (4) bag filter head and material bin. Material bin with gaylord height discharge measures 48″ x 48″ x 127″ tall. Bin has a 53″ straight side with a 24″ 45 degree slope. Granulator S/N 699-3427

  • Array ( [0] => just-arrived [1] => 75-hp-granulators [2] => as-is-granulators-30-hp [3] => just-arrived [4] => 75-hp-granulators [5] => as-is-granulators-30-hp )
  • Stock#: 17335

    USED GRANUTEC TFG3636-125 GRANULATOR SYSTEM


    Granutec model TFG3636-125 granulator having a 36″ x 36″ feed throat. Tangential cutting chamber with three (3) knife open rotor. Two (2) bed knives. Rotor is belt driven by a 125 HP 460-volt 1185 RPM 146 FLA motor. Tray feed hopper. Granulator and controls are mounted on a base plate with fork lift rails. Discharge is set up for an 8″ right hand airveyor. Discharge is via a Kongskilde model MTD-35 blower with 15 HP motor and steel reinforced impeller. Blower discharges into a Kongskilde model RC40 cyclone with nine (9) bag filter head, Kongskilde RF20 rotary valve, and material holding bin. Bin measures 48″ x 48″ x 127″ tall plus 24″ of 45-degree slope. Bin also has 6″ OD gaylord height discharge, Granulator S/N 1205-4296.

  • Array ( [0] => 75-hp-granulators [1] => as-is-granulators-30-hp [2] => 75-hp-granulators [3] => as-is-granulators-30-hp )
  • Stock#: 16405

    USED CUMBERLAND 20C GRANULATOR


    CUMBERLAND MODEL 20C GRANULATOR, S/N NONE, 9″ X 20″ FEED THROAT, DIRECT DRIVEN 3 KNIFE ROTOR, 2 BED KNIFE, 75 HP 885 RPM 460 VOLT MOTOR, NO IN-FEED HOPPER, GRAVITY DISCHARGE, MOUNTED ON 84″ WIDE X 39″ DEEP BASE, WITH STARTER AND CONTROLS

  • Array ( [0] => 75-hp-granulators [1] => 75-hp-granulators )
  • Stock#: 17191

    USED CUMBERLAND 1837B GRANULATOR


    CUMBERLAND MODEL 1837B GRANULATOR, S/N 50510-00001, 18″ X 37″ FEED THROAT, 3 KNIFE HIGH SHEAR STAINLESS STEEL ROTOR, 2 BED KNIFE, 75 HP 230/460 VOLT MOTOR, STAINLESS STEEL CONTACT SURFACES INSIDE CUTTING CHAMBER, SIDE FEED HOPPER, MOUNTED ON PLATE BASE WITH VIBRATION PADS, 8″ AIRVEYOR DISCHARGE, INCLUDES 460 VOLT GRANULATOR STARTER IN A STAINLESS STEEL ENCLOSURE

  • Array ( [0] => 75-hp-granulators [1] => 75-hp-granulators )
  • Stock#: 16502

    USED NELMOR G1424MB GRANULATOR


    NELMOR MODEL G1424MB GRANULATOR, S/N NONE, 14″ X 24″ FEED THROAT, 3 KNIFE SOLID ROTOR, 2 BED KNIFE, 150 HP 460 VOLT 1775 RPM MOTOR, TRAY OR CONVEYOR FEED HOPPER, MOUNTED ON SHORT LEG BASE, NO STARTER OR CONTROLS INCLUDED

  • Array ( [0] => 75-hp-granulators [1] => 75-hp-granulators )
  • Stock#: 16597

    USED CUMBERLAND 1426i GRANULATOR


    CUMBERLAND MODEL 1426i GRANULATOR, S/N 291315-02002, 14″ X 26″ FEED THROAT, 3 KNIFE TWIN SHEAR HARD FACED ROTOR, 2 BED KNIFE, HARD FACED CUTTING CHAMBER, 100 HP 1180 RPM 460 VOLT MOTOR, DUAL FLY WHEELS, GAYLORD GRAVITY DISCHARGE, 56″ WIDE X 88″ DEEP GAYLORD AREA WITH 49″ TALL CLEARANCE, INSULATED TRAY FEED HOPPER WITH A 85″ IN-FEED HEIGHT, INCLUDES SIZE 4 ACROSS THE LINE STARTER AND CONTROLS

  • Array ( [0] => 75-hp-granulators [1] => 75-hp-granulators )
  • Stock#: 10406

    CUMBERLAND 1426i GRANULATOR


    CUMBERLAND MODEL 1426i GRANULATOR, NO S/N, 14″ X 26″ FEED THROAT, 3 KNIFE TWIN SHEAR ROTOR, 2 BED KNIFE, 75 HP 460 VOLT MOTOR, INSULATED TRAY FEED HOPPER, 6″ AIRVEYOR DISCHARGE, FORK LIFT RAIL BASE, STARTER AND CONTROLS NOT INCLUDED

  • Array ( [0] => 75-hp-granulators [1] => 75-hp-granulators )
  • Stock#: 15065

    CUMBERLAND 1426i GRANULATOR


    CUMBERLAND MODEL 1426i GRANULATOR, S/N 291315-97009, 14″ X 26″ FEED THROAT, 3 KNIFE TWIN SHEAR ROTOR WITH KNIFE CARRIERS, DUAL FLYWHEEL, 2 BED KNIFE, 75 HP 460 VOLT 1160 RPM MOTOR, CONVEYOR IN-FEED HOPPER WITH A 85″ IN-FEED HEIGHT, 6″ RIGHT HAND AIRVEYOR DISCHARGE, FORKLIFT BASE, STARTER AND CONTROLS NOT INCLUDED

  • Array ( [0] => 75-hp-granulators [1] => 75-hp-granulators )
  • Stock#: 14462

    CUMBERLAND 1426i GRANULATOR


    CUMBERLAND MODEL 1462i GRANULATOR, S/N NONE, 14″ x 26″ FEED THROAT, 3 KNIFE TWIN SHEAR ROTOR WITH KNIFE CARRIERS, 2 BED KNIFE, DUAL FLYWHEEL, 460 VOLT 100 HP MOTOR, INSULATED TRAY FEED HOPPER, 6″ RIGHT HAND AIRVEYOR DISCHARGE, FORKLIFT BASE, STARTER AND CONTROLS NOT INCLUDED

  • Array ( [0] => 75-hp-granulators [1] => 75-hp-granulators )
  • Stock#: 14717

    NELMOR G1454MB GRANULATOR


    NELMOR MODEL G1454MB GRANULATOR, S/N NONE, 14″ X 54″ FEED THROAT, 3 KNIFE SOLID ROTOR, 2 BED KNIFE (3 SEGMENTS PER SIDE), IN FEED HOPPER, OUT-BOARD PLUMBERS BEARINGS, 200 HP 460 VOLT 1780 RPM MOTOR, 8″ AIRVEYOR DISCHARGE, CHAMBER IS MOUNTED ON 37.5″ TALL LEG BASE, OVERALL FOOT PRINT IS 92″ WIDE X 104″ DEEP

  • Array ( [0] => 75-hp-granulators [1] => 75-hp-granulators )
  • Stock#: 3494

    CUMBERLAND 1524B GRANULATOR


    CUMBERLAND MODEL 1524B GRANULATOR, 15″ X 24″ FEED THROAT, 3 KNIFE HIGH SHEAR ROTOR, 2 BED KNIFE, 75 HP 230/460 VOLT MOTOR, TRAY FEED HOPPER, 6″ AIRVEYOR DISCHARGE, 22″ PLATE BASE, NO STARTER OR CONTROLS (2 AVAILABLE)

  • Array ( [0] => 75-hp-granulators [1] => 75-hp-granulators )
  • Stock#: 16876

    USED CUMBERLAND 1524B GRANULATOR W/SHEET FEED


    CUMBERLAND MODEL 1524B GRANULATOR, S/N 58570-703, 15″ X 24″ FEED THROAT, 3 KNIFE STEEP ANGLE ROTOR, 2 BED KNIFE, 75 HP 230/460 VOLT MOTOR, TRAY FEED HOPPER WITH 8″ X 23″ REAR SHEET FEED, 6″ AIRVEYOR DISCHARGE, MOUNTED ON LOW PLATE BASE WITH A 52″ X 77″ FOOT PRINT, STARTER AND CONTROLS NOT INCLUDED

  • Array ( [0] => 75-hp-granulators [1] => 75-hp-granulators )
  • Stock#: 14513

    CUMBERLAND 1524F GRANULATOR


    CUMBERLAND MODEL 1524F GRANULATOR, S/N 258500-86001, 15″ X 24″ FEED THROAT, 6 KNIFE WATER COOLED FILM ROTOR, 2 DOUBLE STEP BED KNIVES, 75 HP 230/460 VOLT 1775 RPM MOTOR, OEM STYLE TRAY OR CONVEYOR FEED HOPPER (CUSTOMER SPECIFIED), 8″ AIRVEYOR DISCHARGE, MOUNTED ON A STEP BASE, NO STARTER OR CONTROLS

  • Array ( [0] => 75-hp-granulators [1] => 75-hp-granulators )
  • Stock#: 14238

    GRANUTEC TFG1624.75 GRANULATOR


    GRANUTEC MODEL TFG1624.75 GRANULATOR, S/N 793.2093, 16″ X 24″ FEED THROAT, 3 KNIFE OPEN ROTOR, 2 BED KNIFE, 75 HP 230/460 VOLT MOTOR, INSULATED TRAY FEED HOPPER, TANGENTIAL CUTTING CHAMBER, 6″ LEFT HAND AIRVEYOR DISCHARGE, MOUNTED ON PLATE BASE, COMPLETE WITH STARTER AND CONTROLS

  • Array ( [0] => 75-hp-granulators [1] => 75-hp-granulators )
  • Stock#: 17165

    USED CUMBERLAND 1828B GRANULATOR PACKAGE


    CUMBERLAND MODEL 1828B GRANULATOR, S/N 49215-632, 18″ X 28″ FEED THROAT, 5 KNIFE STEEP ANGLE ROTOR, 2 BED KNIFE, 100 HP 460V MOTOR, TRAY FEED HOPPER, 6″ AIRVEYOR DISCHARGE, MOUNTED ON A 46″ TALL LEG BASE, WITH GRANULATOR SOFT STARTER AND ACROSS THE LINE BLOWER STARTER PANEL, PACKAGE ALSO INCLUDES #8 CYCLONE WITH STAND, #6 5 HP DIRECT DRIVE BLOWER

  • Array ( [0] => 75-hp-granulators [1] => 75-hp-granulators )
  • Stock#: 16533

    USED CUMBERLAND 1828B GRANULATOR CHAMBER


    CUMBERLAND MODEL 1828B REPLACEMENT GRANULATOR CUTTING CHAMBER, S/N 49410-803, 18″ X 28″ FEED THROAT, 3 KNIFE HIGH SHEAR ROTOR, 2 BED KNIFE, COMPLETE WITH PULLEY

  • Array ( [0] => 75-hp-granulators [1] => 75-hp-granulators )
  • Stock#: 14248

    USED CUMBERLAND 1828B GRANULATOR


    CUMBERLAND MODEL 1828B GRANULATOR, S/N 49410-711, 18″ X 28″ FEED THROAT, 3 KNIFE STEEP ANGLE ROTOR, 2 BED KNIFE, 75 HP 460 VOLT MOTOR, CONVEYOR FEED HOPPER, 8″ AIRVEYOR DISCHARGE, LEG BASE, NO STARTER OR CONTROLS

  • Array ( [0] => 75-hp-granulators [1] => 75-hp-granulators )
  • Stock#: 10875

    CUMBERLAND 1828B GRANULATOR


    CUMBERLAND MODEL 1828B GRANULATOR, S/N 49410-779, 18″ X 28″ FEED THROAT, 3 KNIFE STEEP ANGLE ROTOR, 2 BED KNIFE, 75 HP 460 VOLT MOTOR, TRAY FEED HOPPER, 8″ AIRVEYOR DISCHARGE, MOUNTED ON LEG BASE, STARTER AND CONTROLS NOT INCLUDED

  • Array ( [0] => 75-hp-granulators [1] => as-is-granulators-30-hp [2] => 75-hp-granulators [3] => as-is-granulators-30-hp )
  • Stock#: 17148

    USED CUMBERLAND 1837B GRANULATOR


    CUMBERLAND MODEL 1837B GRANULATOR, S/N 50510-89009, 18″ X 37″ FEED THROAT, HARD-FACED 3 KNIFE HIGH SHEAR ROTOR, 2 BED KNIFE, HARD-FACED CUTTING CHAMBER, 150 HP 460 VOLT 1785 RPM MOTOR, TRAY FEED HOPPER, 6″ AIRVEYOR DISCHARGE, MOUNTED ON A STEP BASE, STARTER AND CONTROLS NOT INCLUDED, REBUILT BY BLADES MACHINERY IN JANUARY 2019

  • Array ( [0] => just-arrived [1] => 75-hp-granulators [2] => shredders [3] => just-arrived [4] => 75-hp-granulators [5] => shredders )
  • Stock#: 17280

    USED SSI M55E SHREDDER / CUMBERLAND 1837B SYSTEM PACKAGE


    SSI model M55E two shaft dual-shear shredder, S/N S2455, manufactured 11/2013, low speed and high torque 20-3/4″ x 40-1/2″ cutting chamber with five 3-3/4″ wide and one 1-3/4″ cutters per shaft powered by a inverter duty 25 hp 230/460 volt 1765 rpm motor thru a 69.7:1 gear reducer, includes original OEM control / starter panel

    Cumberland Model 1837B Granulator, S/N 50510-18004, 18″ x 37″ feed throat, 5 knife high shear hard-faced rotor, hard faced cutting chamber, 2 bed knives, 100 HP 460 volt motor, mounted on 22″ tall plate base, 10″ airveyor discharge, includes soft starter control panel, less than 100 hours use on the granulator and starter.

    Also includes, Sterling 9015FV 15 HP blower with heavy duty housing, heavy duty removable outlet, and steel impeller upgrades, 10″ OD inlet & outlet. Sterling #15 cyclone with dual 10″ OD inlets and heavy duty replaceable inlet/upper cone wear liner. Lot of 10″ (FK250) Kongskilde connecting pipe and late model hydraulic gaylord dumper

    Customer choice to include in-feed and take away conveyors (originally used on different in-feed and discharge configurations for the shredder)

    Take away conveyor is 17′ long with a 22″ wide rubber cleated belt, 3″ tall cleats on 30″ centers, 18″ tall side walls, powered by a 1.5 hp 1730 rpm motor thru a 80:1 gear reducer, 5″ diameter head pulley, in- feed conveyor is 13′ long with a 22″ wide rubber cleated belt, 3″ tall x 8″ wide partial cleats on 11″ centers, 12″ tall side-walls, powered by a 1/2 hp 1750 rpm motor thru 125:1 gear reducer, 8″ diameter head pulley, variable speed 460 volt controls (pictures are available of the original shredder and conveyor configuration)