Array ( [0] => as-is-granulators-0-25-hp [1] => as-is-granulators-0-25-hp )
  • Stock#: 17773

    USED CUMBERLAND 184 GRANULATOR


    Cumberland model 184 granulator, S/N 239150-86501, 8″ x 10″ feed throat, 3 knife open rotor, 2 bed knife, 7.5 HP 230/460-volt motor – wired 480-volts, insulated tray feed hopper and body panels, “homemade” bin discharge, 1/4′ holes screen installed, on casters, complete with starter and controls.

  • Array ( [0] => as-is-granulators-0-25-hp [1] => as-is-granulators-0-25-hp )
  • Stock#: 17762

    USED CUMBERLAND 810 GRANULATOR


    Cumberland model 810 granulator, 8″ x 10″ feed throat, 2 knife solid rotor, 2 bed knife, 5 HP 230/460-volt motor, tray feed hopper, bin with 2″ OD rear vacuum take off discharge, 1/4″ holes screen, mounted on casters, complete with starter and controls

    Price $1,000.00 as is running condition

  • Array ( [0] => as-is-granulators-0-25-hp [1] => as-is-granulators-0-25-hp )
  • Stock#: 17761

    USED NELMOR V68 GRANULATOR


    Nelmor model V68 granulator, S/N 00E03872, 6″ x 8″ feed throat, 3 knife open rotor, 1 bed knife, 5 HP 230/460-volt 1745 RPM motor, insulated tray feed hopper, 2″ OD left hand airveyor discharge, 1/4″ holes screen, on casters, complete with starter and controls

    Price $1,750.00 as is running condition

  • Array ( [0] => as-is-granulators-0-25-hp [1] => as-is-granulators-0-25-hp )
  • Stock#: 17450

    USED SEM / NELMOR MV1016 GRANULATOR


    SEM model MV1016 (Nelmor MV1016) granulator, S/N 05I06330, 10″ x 16″ feed throat, 5 knife solid rotor, 2 bed knife, 15 HP 230/460-volt 1760 RPM motor, insulated tray feed hopper, 4″ OD right hand airveyor discharge, on casters, complete with starter and controls

  • Array ( [0] => as-is-granulators-0-25-hp [1] => feed-paddle-roll-granulators [2] => as-is-granulators-0-25-hp [3] => feed-paddle-roll-granulators )
  • Stock#: 17391

    USED GRANUTEC TFG810-10 FEED ROLL GRANULATOR


    Granutec model TFG810-10 granulator, S/N 0109.4765, 8″ x 10″ feed throat, 3 knife rotor, 2 bed knife, 10 HP 460-volt motor, rear 10″ wide smooth steel feed roll in-feed powered by a 1/2 HP 90-volt D/C motor and variable speed control, 5″ OD right hand airveyor discharge, on casters, complete with starter and controls

  • Array ( [0] => as-is-granulators-0-25-hp [1] => as-is-granulators-0-25-hp )
  • Stock#: 16883

    USED CUMBERLAND 284 GRANULATOR


    Cumberland model 284 granulator, S/N 325525-82067, 10″ x 12″ feed throat, 3 knife open rotor, 2 bed knife, 10HP 460 volt motor insulated tray feed hopper and body panels, bin discharge, on casters, complete with starter and controls.

    Price: $750.00, as is, running.

  • Array ( [0] => as-is-granulators-0-25-hp [1] => as-is-granulators-0-25-hp )
  • Stock#: 16892

    USED NELMOR G12295M1 GRANULATOR


    Nelmor model G12295M1 granulator. S/N 8912-28690. 12″ x 29.5″ feed throat, 2 knife open rotor, dual 15HP 208-230/460V motors. Modified rear facing double wall tray feed hopper, bin discharge. Mounted on casters, complete with 460V starter and controls.

    Price: $10,000.00, as is, running.

  • Array ( [0] => as-is-granulators-0-25-hp [1] => as-is-granulators-0-25-hp )
  • Stock#: 16897

    USED NELMOR G12295M1 GRANULATOR


    Nelmor model G12295M1 granulator. S/N 8912-28691. 12″ x 29.5″ feed throat, 2 knife open rotor, 2 bed knife. Dual 15HP 230/460V 1,755 RPM motors. Rear facing double wall tray feed hopper with 5.5″ x 35″ side feed bin discharge with vacuum take off. Complete with starter and controls.

    Price: $10,000.00, as is, running.

  • Array ( [0] => as-is-granulators-0-25-hp [1] => as-is-granulators-0-25-hp )
  • Stock#: 4992

    USED IMS 6″ X 8″ GRANULATOR


    IMS 68 granulator 6″ x 8″ feed throat, 3HP motor. Mounted on casters.

    Price: $750.00, as is, where is.

  • Array ( [0] => as-is-granulators-0-25-hp [1] => as-is-granulators-0-25-hp )
  • Stock#: 14721

    NELMOR V68 GRANULATOR


    Nelmor model V68 granulator, S/N 99H02948. 6″ x 8″ feed throat, 3 knife open rotor, 1 bed knife, 5HP 230/460V motor. Insulated tray feed hopper, bin discharge with 2″ vacuum take off. Mounted on casters, complete with starter and controls.

    Three machines are available.

  • Array ( [0] => as-is-granulators-0-25-hp [1] => as-is-granulators-0-25-hp )
  • Stock#: 16219

    USED RAPID 611SRE GRANULATOR


    Rapid model 611SRE granulator, S/N none. 6″ x 11″ feed throat, 12 knife staggered rotor, 2 bed knives, 2.6kW (3HP), 230/460V motor. Top feed hopper, bin discharge with vacuum take off. Mounted on casters, complete with starter and controls.

    Price: $2,950.00, as is, where is.

  • Array ( [0] => as-is-granulators-0-25-hp [1] => as-is-granulators-0-25-hp )
  • Stock#: 6096

    USED CUMBERLAND 810 GRANULATOR


    Cumberland model 810 granulator, S/N 39000-68118. 8″ x 10″ feed throat, 2 knife open rotor, 2 bed knife, 5HP 230/460V motor, tray feed hopper, bin discharge. Mounted on casters, complete with starter and controls.

    Four machines are available in varying condition.

    Price: $750.00, as is, each.

  • Array ( [0] => as-is-granulators-0-25-hp [1] => feed-paddle-roll-granulators [2] => as-is-granulators-0-25-hp [3] => feed-paddle-roll-granulators )
  • Stock#: 16536

    USED BALL & JEWEL 812 FEED ROLL GRANULATOR


    Ball & Jewel model 812 feed roll granulator, no S/N. 8″ x 12″ feed throat, 3 knife open rotor. 2 bed knife cutting chamber, 25HP 460V rotor motor. Chain and sprocket driven feed rolls. Spring pinch top roll is an 8″ diameter x 12″ wide smooth steel roll. Lower roll is a 6″ diameter 12″ wide knurled steel roll. Rolls are in an off-set position. The rolls are powered by a 3/4HP 1,725 RPM DC motor through a 19:1 gearbox with an output speed of 91 RPM. Blower discharged via a 5HP 3,480 RPM motor with a 4″ OD outlet aluminum blower impeller. Machine is mounted on casters, complete with starter and controls for granulator. DC drive for feed rolls is a constant on configuration with no variable speed control.

    Price: $2,500.00, as is.

  • Array ( [0] => used-equipment [1] => as-is-granulators-0-25-hp [2] => used-equipment [3] => as-is-granulators-0-25-hp )
  • Stock#: 1032

    USED NELMOR 812 AUGER GRANULATOR


    Nelmor 812 auger granulator, S/N none. 8 x 12 feed throat 8 x 29 auger area, 2 knife fly solid rotor, 2 bed cutting chamber 7.5HP granulator motor 2.0HP auger motor, complete with starter and controls. Mounted on casters with vacuum take-off discharge.

    Price: $2,900.00, as is.

  • Array ( [0] => as-is-granulators-0-25-hp [1] => as-is-granulators-0-25-hp )
  • Stock#: 16523

    USED CUMBERLAND 485 GRANULATOR


    Cumberland model 485 granulator. S/N 221570-7243. 14″ x 16″ feed throat, 3 knife open rotor, 2 bed knife, 25HP 230/460V motor. Insulated tray feed hopper and body panels, bin discharge with a 2.5″ OD left hand vacuum take off. Mounted on casters, complete with starter and controls.

    Price: $4,500.00, as is, running condition.

  • Array ( [0] => as-is-granulators-0-25-hp [1] => as-is-granulators-0-25-hp )
  • Stock#: 16535

    USED CUMBERLAND 584 GRANULATOR


    Cumberland model 584 granulator. S/N none. 14″ x 20″ feed throat, 3 knife open rotor, 2 bed knife, 15HP 460V motor. Box hopper in-feed, 6″ OD left hand airveyor discharge. Mounted on casters, no starter or controls.

    Price: $7,500.00, as is.

  • Array ( [0] => as-is-granulators-0-25-hp [1] => lowspeed-screenless-granulators [2] => as-is-granulators-0-25-hp [3] => lowspeed-screenless-granulators )
  • Stock#: 16488

    USED MODITEC G-PLUS 2 GRANULATOR


    Moditec model Goliath G-Plus2 granulator. S/N 7033. 10.5″ x 9″ cutting chamber, two 9.5″ OD cutters, three rollers on screenless design, chain driven cutters via 0.9 kW, 208-230/460V motor. Wired for 240V. Top hand or robot in-feed bin discharge with vacuum take off and electronic eye level sensor. Auto-off feature on cutter motor mounted to low frame base with casters complete with starter and controls.

    Two machines are available.

  • Array ( [0] => as-is-granulators-0-25-hp [1] => as-is-granulators-0-25-hp )
  • Stock#: 16374

    USED PROCESS CONTROL 10″ X 12″ FILM GRANULATOR


    Used Process Control 1012 granulator. 10″ x 12″ feed throat. 10HP motor, blower discharge designed for film belt drive. Includes starter and controls.

    Price: $3,500.00, as is.

  • Array ( [0] => used-equipment [1] => as-is-granulators-0-25-hp [2] => used-equipment [3] => as-is-granulators-0-25-hp )
  • Stock#: 2386

    USED CUMBERLAND 1012 GRANULATOR


    Cumberland model 1012 granulator, size 2. S/N 25086-7090. 10×12 feed throat. 3 knife open rotor, 2 bed knife cutting chamber. Side mounted #4 blower 1HP mounted on plate base. No controls are included.

    Price: $1,500.00, as is.

  • Array ( [0] => as-is-granulators-0-25-hp [1] => as-is-granulators-0-25-hp )
  • Stock#: 12710

    USED GLOUCESTER 1012BP GRANULATOR


    Gloucester model 1012BP granulator, S/N 22250-01. 10″ x 12″ feed throat. 3 knife open rotor, 2 bed knives. 10HP 230/460V motor, tray feed hopper, bin discharge. Mounted on casters. Incomplete starter. No start and stop buttons.

    Price: $500.00, as is, where is.