-
Stock#: 16962
USED WABASH G302H-ASTMX 30 TON HYDRAULIC PLATEN PRESS
WABASH GENESIS MODEL G302H-ASTMX 30 TON HYDRAULIC PLATEN PRESS, S/N 9063, UNIT HAS FOUR (4) 12″ X 12″ ELECTRICALLY HEATED, WATER COOLED PLATENS WITH TWO DAYLIGHTS. EACH PLATEN HAS 4500 WATTS OF HEATING. APPROXIMATELY 4″ DAYLIGHT IN EACH OPENING, 5″ X 6″ COMPRESSION CYLINDER AND 17″ WIDE TIE BAR SPACING. INTEGRAL 2 HP HYDRAULIC PUMP, CONTROL PANEL WITH ALLEN BRADLEY CONTROLLER AND ALL OTHER CONTROLS, 460 VOLT OPERATION, 29 MAXIMUM AMP LOAD, MANUFACTURED 12/1992
-
Stock#: 16824
USED BERINGER 2 HP HYDRAULIC POWER PACK
BERINGER MODEL HPNVL 2 HP HYDRAULIC POWER PACK, S/N 4SL704-3, 2 HP 230/460 MOTOR WITH PUMP, WHICH ARE NOT MOUNTED TO TANK, WITH CONTROLS
-
Stock#: 16814
USED CARVER HYDRAULIC PRESS
CARVER MODEL 19200-197 MANUAL HYDRAULIC PRESS, TWO 6″ X 6″ ELECTRICALLY HEATED PLATENS, ADJUSTABLE DAYLIGHT
-
Stock#: 16476
USED DYNISCO 3 HP HYDRAULIC PUMP WITH ACCUMULATOR
DYNISCO EXTRUSION MODEL HPU50Z HYDRAULIC PUMP, S/N HPU00-102, POWERED BY A 230/460 VOLT 3 HP 1800 RPM MOTOR, INCLUDES PARKER HANNIFAN 1155 CUBIC INCH CAPACITY PISTON ACCUMULATOR
-
Stock#: 14800
USED 5 HP HYDRAULIC PUMP
5 HP 208-230/460V HYDRAULIC PUMP, NO S/N, MOUNTED ON UNITIZED CASTER CART WITH HYDRAULIC OIL RESERVOIR, NO ACCUMULATOR (2 AVAILABLE)
-
Stock#: 14948
FREEMAN SCHWABE MODEL HS-30 HIGH SPEED HYDRAULIC CUTTING PRESS
FREEMAN SCHWABE MODEL HS-30 HIGH SPEED HYDRAULIC CUTTING PRESS, S/N HS30085, MFG 2009 AND WAS NEVER USED, 30 METRIC TONS CUTTING FORCE, 7.5 HP 460 VOLT MOTOR, 180mm CUTTING STROKE, 250mm OPEN DAYLIGHT, 500mm DEEP X 650mm WIDE MACHINE BED, 450mm DEEP X 600mm WIDE EFFECTIVE CUTTING AREA, 54.3 mm/second DOWNSTROKE SPEED, 104.2 mm/second UPSTROKE SPEED, 480/3/60 POWER SUPPLY, 13 AMPS RUNNING AMP DRAW, 50 AMPS PEAK STARTUP AMPS, MACHINE MEASURES 2230mm TALL X 5055mm DEEP X 157mm WIDE, 3905 KG WITHOUT THE 75 LITERS HYDRAULIC OIL, REQUIRES 6kg/cm2 AIR SUPPLY TO OPERATE
-
Stock#: 8601
VICKERS HYDRAULIC PUMP
VICKERS HYDRAULIC PUMP, 7.5 HP HYDRAULIC PUMP
-
Stock#: 7106
WALTER NORRIS HYDRAULIC PUMP
WALTER NORRIS HYDRAULIC PUMP, S/N 1373, 50 HP
-
Stock#: 3378
HYDRAULIC PUMP UNIT
HYDRAULIC PUMP UNIT, FOR USE IN PRESSURE APPLICATIONS, VERTICAL MOTOR DESIGN
-
Stock#: 2032
HYDRAULIC POWER PACK
HYDRAULIC POWER PACK, 10 HP 230/460 VOLT MOTOR
-
Stock#: 1157
BROWN & SHARPE MFG DOUBLE A SERIES HYDRAULIC PUMP
BROWN & SHARPE MFG DOUBLE A SERIES HYDRAULIC PUMP, RELIANCE A/C 5 HP 230/460 VOLT 1730 RPM MOTOR, DOUBLE A HYDRAULIC UNIT MODEL T30P-7V12-LM-P3, S/N 83L-39560, DOUBLE A PUMP MODEL 12-PC-10-A1, S/N 1724, ELECTRICAL JUNCTION BOX, NO STARTER OR CONTROLS
-
Stock#: 12623
HANNIFIN CORP MODEL F-250-41 HYDRAULIC PRESS
HANNIFIN CORP MODEL F-250-41 HYDRAULIC PRESS, S/N 24590, 25 TON CAPACITY, 12" STROKE, 14" DAYLIGHT, TABLE AREA IS 36" LEFT TO RIGHT AND 12" FRONT TO BACK, 8" CENTERLINE FROM RAM TO FRAME, 4" DIAMETER RAM, 40" TABLE DISTANCE TO FLOOR, SPEEDS ARE ADVANCE 85 IPM, PRESS 85, AND RETURN 160 IPM, 1990 MAXIMUM PSI, OVERALL DIMENSIONS ARE 48" X 45" X 92, APPROX 6500 LBS
-
Stock#: 14353
2 HP HYDRAULIC PUMP
2 HP HYDRAULIC PUMP, 230/460 VOLT MOTOR, 5000 PSI CHECK VALVE, 3000 PSI PRESSURE GAUGE, COMPLETE WITH STARTER AND CONTROLS
-
Stock#: 14450
RHM FLUID POWER INC HYDRAULIC PUMP
RHM FLUID POWER INC HYDRAULIC PUMP, S/N RHM-160-JC8060, MFG 3/2001, 25 HP 1200 RPM MOTOR, 480 VOLT OPERATION, 160 GALLON / 606 LITER RESERVOIR CAPACITY, 46AW ISO VISCOSITY GRADE, 140-F / 60C MAXIMUM OPERATION TEMPERATURE, 2500 PSI / 172.5 BAR MAXIMUM SYSTEM DESIGN PRESSURE, PUMP #1 (MAIN PUMP) 2500 PSI / 172.5 BAR @ 19 GPM / 72 IPM OPERATING PRESSURE / FLOW, PUMP #2 (CIRCULATION PUMP) 1200 PSI / 83 BAR @ 5 GPM / 19 IPM OPERATING PRESSURE / FLOW, PUMP #3 (SECONDARY PUMP) 25 PSI / 1.75 BAR@ 9.7 GMP / 36.7 IPM, WITH HIGH TEMP AUTOMATIC SHUT DOWN UNIT
-
Stock#: 14799
5 HP 208-230/460V HYDRAULIC PUMP
5 HP 208-230/460V HYDRAULIC PUMP, NO S/N, MOUNTED ON UNITIZED CASTER CART WITH HYDRAULIC OIL RESERVIOR, LAST USED FOR CORE PULL ON AN INJECTION MOLDING MACHINE (3 AVAILABLE)