Product Categories: «Feeders»

USED ACRISON 105Z-HH VOLUMETRIC FEEDER

Used Acrison model 105Z-HH volumetric feeder. S/N 14530-03. Stainless-steel contact parts. Interior lump breaker. Missing screw and discharge tube. 1 HP A/C motor. No drive. Bindicator on in-feed hopper. Large Foremost receiver mounted on in-feed hopper. Very clean. 208-220/460/3/60 operation

USED ACRISON 4 COMPONENT FEEDER SYSTEM

One (1) used Acrison four (4) component volumetric feeding system. Manufactured in 1999. Includes the following:

A) Acrison model 101-1-K feeder.. Approximately 3 ¾” ID discharge tube. 1 HP DC motor. Serial number 99180-02 .

B) Acrison model 101-D feeder. Approximately 1 ½”” ID discharge tube. .5 HP DC motor. Serial number 99180-03 .

C) Acrison model 101-1-K feeder.. Approximately 3 ¾” ID discharge tube. 1 HP DC motor.

D) Acrison model 105Z-K feeder. Approximately 3 ¾” ID discharge tube. 1 HP DC motor. Serial number 99180-01

E) Acrison control panel for up to 5 feeders.

USED MAGUIRE ADDITIVE FEEDER

One (1) used Maguire model MCF-4-34 concentrate feeder. Unit is rated for one to seven pounds an hour throughput. ½” screw. Includes controller. S/N 27387. 110/1/60 operation.

USED CONAIR BFO ADDITIVE FEEDER W/CONTROL

One (1) used Conair Model BFO at the throat additive feeder. S/N A50763. Screw is driven by an approximate 1/8 HP 90-volt D/C motor. 1.5″ outlet. Includes Conair extruder tracking feeder control and feed hopper. 115/1/60

USED CONAIR BFO ADDITIVE FEEDER W/CONTROL

One (1) used Conair Model BFO at the throat additive feeder. Screw is driven by an approximate 1/8 HP D/C motor. 1.5″ outlet. Includes Conair feeder control and feed hopper. 115/1/60. Serial number 125471

USED CONAIR BFO ADDITIVE FEEDER W/CONTROL

One (1) used Conair Model BFO at the throat additive feeder. Screw is driven by an approximate 1/8 HP D/C motor. 1.5″ outlet. Includes Conair extruder tracking feeder control and feed hopper. 115/1/60. Serial number 125472

USED ERIEZ MAGNETICS 15A VIBRATOR FEEDER

Eriez magnetics model 15A vibrator feeder, S/N 227803. 115V operation includes a Unicorn solid state controller model UN-115-2A-FM, S/N 10758-8, 115-Volt operation.

USED ERIEZ MAGNETICS 26C VIBRATORY FEEDER

Eriez magnetics model 26C vibrator feeder, S/N 235159. 115V, 60Hz, 1.1 amps operation. Includes a Unicorn solid state controller model UN-115-2A-FM, S/N 20584-15, 115V operation.

USED K-TRON KCLQX3 SCREW FEEDER

K-Tron model KCLQX3 material screw feeder. Stainless steel construction, 1″ auger screw installed. K-Tron SCM smart logic control module. 20 PPH, 2,400 RPM. Includes a 3/16″ spare screw and outlet, and a 1/2″ spare screw and outlet.

USED SCHENK ACCURATE MATERIAL FEEDER

Schenck AccuRate material feeder, S/N 148610-03A-CPE. Stainless steel construction live hopper, 1″ OD auger screw 48″ long discharge model PWS-17238 load cell with controls.

USED SCHENK ACCURATE MATERIAL FEEDER

Schenck AccuRate material feeder, stainless steel construction live hopper, 1″ OD auger screw, 54″ long discharge. Model PWS-17238 load cell. No controls are included.

USED SCHENK ACCURATE MATERIAL FEEDER

Schenck AccuRate material feeder, S/N 55740-06A-MECGM. Stainless steel construction live hopper, two 1/4″ OD auger screws, 26″ long discharge. Model PWS-17238 load cell. Includes controls.

USED ACCU-RATE 2″ AUGER FEEDER

Accu-Rate auger feeder, S/N none, stainless steel body, 2″ OD screw auger, twin DC motors with an internal DC power supply. 18″ x 18″ x 12″ deep plastic lined material trough. Includes dual motor control for the auger and agitator.

USED ACRISON STAINLESS MATERIAL FEEDER

Used Acrison model GP403-75-50-101-C gravimetric weigh feeder, S/N 98064-02 manufactured in 1998. Stainless steel contact parts 1″ diameter auger screw gearbox with a 15:1 reduction ratio is driven by a Baldor 0.25HP 1,750 RPM 90V DC motor with silicone controlled rectifier DC control. Includes load cell. Material breaker around screw vibrator on the hopper lid.

USED ACRISON STAINLESS MATERIAL FEEDER

Used Acrison model GP403-300-100-101-GG gravimetric weigh feeder, S/N 97278-02. Stainless steel contact parts, 2 ½” diameter auger screw gearbox with a 30:1 reduction ratio driven by an Emerson DC 1HP 1750 RPM 90V DC motor with silicone controlled rectifier DC control with load cell vibrator on feed hopper and feeder. No lid on hopper with controls, 1997 model year.

USED ACRISON STAINLESS MATERIAL FEEDER

Acrison model GP403-300-100-101-GG gravimetric weigh feeder, S/N 97278-07, manufactured in 1997. Stainless steel contact parts, 2-½” diameter auger screw gearbox with a 30:1 reduction ratio is driven by a Leeson DC 0.5HP 1,750 RPM 90V DC motor with a silicone controlled rectifier control. Unit has a load cell vibrator on the feed hopper and feeder. There is no lid on the hopper.

USED PLASTICOLOR MATERIAL FEEDER

Plasticolor material feeder, 1/2″ auger with no controls. Includes 28″ wide x 28″ wide x 8″ straight side plus 26″ long cone material hopper site glass and bunting magnet drawer.