Array ( [0] => mixers [1] => mixers )
  • Stock#: 17734

    USED 30 CUBIC FOOT CAPACITY AUGER BLENDER


    Used approximate 30 cubic foot capacity cascade auger blender, 4″ auger powered by a 2 HP 208-230/460-volt 1740 RPM motor thru a gearbox, mounted on forklift rail frame for portability.  Includes starter / controls

  • Array ( [0] => just-arrived [1] => mixers [2] => ribbon-blenders [3] => just-arrived [4] => mixers [5] => ribbon-blenders )
  • Stock#: 17714

    USED EIRICH / AMERICAN PROCESS 854 CUBIC FOOT RIBBON / PADDLE MIXER


    Eirich / American Process Systems Model T-500 cylindrical ribbon / paddle mixer

    Having a total vessel volume of 854 cubic feet. Vessel measures 8′ in diameter x 17′ long. All contact parts are manufactured of 316 stainless steel. Tank is ½ thick with 1″ thick end plates. Main shaft is 6.5″ solid 316 stainless steel. Ribbons measure ½ “thick x 3″. Paddles are ¾” thick. 304 stainless steel dimple jacket is ASME coded and rated to 150 PSI @ 350 degrees Fahrenheit. Jacket has four (4) 2″ inlets and four (4) 2″ outlets. Discharge is via a 24″ diameter carbon steel screw conveyor. Approximate overall dimensions of the unit are 32′ x 8′ x 8′. Unit weighs 34,355 pounds. Ribbon and paddles are direct driven by a 75 HP A/C motor with dynamic coupling through a euro drive gear reducer with a 147.56:1 reduction ratio allowing for a 12-RPM rotor speed.  24″ diameter clamped man way on top.  National board number 62. 42″ x 42″ clean out door.  Has end bottom discharge approximately 10″ OD for clean out.  Manufactured 1995. Serial number 4305A. Shop order number 4305

  • Array ( [0] => mixers [1] => mixers )
  • Stock#: 17721

    USED ROSS LDM-2 VACUUM DOUBLE PLANETARY MIXER


    Used Ross Model LDM-2 Vacuum Double Planetary Mixer, 2 Gallon Capacity, Stainless Steel Construction, Stainless steel, jacketed mix can . Driven by 1 HP 1/60/115-230 Volt variable speed Explosion Proof motor, Hand tilt, S/N 71970

  • Array ( [0] => mixers [1] => mixers )
  • Stock#: 17859

    USED WALTER EQUIPMENT R60 DOUBLE RIBBON MIXER


    Used approximately 60 cu.ft. stainless steel double ribbon blender with dual center bottom outlets each equipped with an air actuated slide gate valve. Blender is manufactured by Walter Equipment Limited in Mississauga, Ontario, Canada. Model R60, Serial #DJ6051, New 11/2004. Has 36″ x 92″ stainless steel non-jacketed chamber, dual center outlets, chain and sprocket drive to approximately 25 hp gear head motor. Has 2-piece cover including bag dump station, mounted on stainless steel legs supplying 46″ discharge height, with additional 30″ support structure which will supply a total of 76″ discharge height.

  • Array ( [0] => mixers [1] => mixers )
  • Stock#: 17688

    USED STAINLESS STEEL 250 CUBIC FOOT CAPACITY RIBBON BLENDER


    250 cubic foot capacity non-jacketed stainless steel double ribbon blender, S/N 20-200. Ribbon is chain driven by a Baldor 75 HP 1785 RPM 460-volt 3-phase motor through a gearbox. Trough dimensions are approximately 144″ L x 60″ W x 66″ D and has a center bottom discharge. Overall dimensions of the blender are approximately 186″ L x 67″ W x 107″ H. Mounted on 304 stainless steel legs. Last used on food products



  • Array ( [0] => mixers [1] => mixers )
  • Stock#: 17687

    USED STAINLESS STEEL 250 CUBIC FOOT CAPACITY RIBBON BLENDER


    250 cubic foot capacity non-jacketed stainless steel double ribbon blender, S/N 70-202. Ribbon is chain driven by a Reliance 75 HP 1785 RPM 460-volt 3-phase motor through a gearbox (presently missing). Trough dimensions are approximately 144″ L x 60″ W x 66″ D and has a center bottom discharge. Overall dimensions of the blender are approximately 186″ L x 67″ W x 107″ H. Mounted on 304 stainless steel legs. Last used on food products

  • Array ( [0] => just-arrived [1] => mixers [2] => just-arrived [3] => mixers )
  • Stock#: 17686

    USED STAINLESS STEEL 250 CUBIC FOOT CAPACITY RIBBON BLENDER


    One used 250 cubic foot capacity non-jacketed stainless steel double ribbon blender, S/N 64750-62. Ribbon is chain driven by a Reliance 100 HP 1785 RPM 460-volt 3-phase motor through a gearbox. Trough dimensions are approximately 144″ L x 60″ W x 66″ D and has a center bottom discharge. Overall dimensions of the blender is approximately 186″ L x 67″ W x 107″ H. Mounted on 304 stainless steel legs, includes controls and was last used on food products

     


  • Array ( [0] => high-intensity-mixers [1] => mixers [2] => high-intensity-mixers [3] => mixers )
  • Stock#: 17519

    USED PRODEX-HENSCHEL CM50 COOLER


    One (1) used Prodex-Henschel model CM50 bowl type cooler having a total vessel volume of 350 liters (12.3 cubic foot) and a working capacity of 150 liters (5.3 cubic foot). Bowl is manufactured of stainless steel and jacketed for cooling applications. Optional cooling ring installed. Blade is driven by approximately a 10 HP motor through a gear reducer. Air actuated discharge. Swing-away lid. Serial #8211. 460/3/60 input power

  • Array ( [0] => lab-testing-equipment [1] => mixers [2] => lab-testing-equipment [3] => mixers )
  • Stock#: 17573

    USED BOEKEL SCIENTIFIC ORBITAL MIXER


    Boekel Scientific Orbitron II model 260250 laboratory adjustable speed nutating mixer, S/N 0619001905, 115-volt power pack for 12-volt input, 6 watts power consumption, 1/2-amp load, adjustable speed from 6 to 23 orbits per minute, 23-degree fixed angle tilt allowing 3-dimensional wave mixing, 2.2 Lbs. maximum tray load

  • Array ( [0] => mixers [1] => mixers )
  • Stock#: 17518

    USED HENSCHEL 50JSS HIGH INTENSITY MIXER


    One (1) used Henschel model 50JSS high intensity mixer, S/N 825909, has a vessel volume of 200 liters (7 cubic feet) and has a working capacity of approximately 150 (5.3 cubic feet). Interior of bowl is manufactured of stainless steel and is jacketed for heating or cooling applications. Unit has 2-tier blades which are belt driven by a 50/25 HP 2-speed motor with starter. Defector blade on lid. Mounted on a stand. 460/3/60. Air actuated discharge. Includes spare upper blade, new spare set of belts, and seals. Manufactured 1975. Extremely clean.

  • Array ( [0] => mixers [1] => mixers )
  • Stock#: 17501

    USED BANBURY 25 LB BATCH MIXER


    Used approximately 25 lb. batch size lab Banbury mixer driven by a 7.5/30HP DC motor supplying 450/1800 RPM. Has air floating weight, McCord lubrication, and rotary unions to each 2 wing rotor.

  • Array ( [0] => just-arrived [1] => mixers [2] => just-arrived [3] => mixers )
  • Stock#: 17422

    USED JAEGER RE-900 ROTARY BATCH MIXER


    Jaeger model RE-900 steel rotating batch blender, 403 cubic foot working capacity, carbon steel construction. Direct driven by a 40 HP motor through a gear reducer. Previously used for batch blending approximately10,000 pounds of plastic with additives.

    Two are available.

  • Array ( [0] => mixers [1] => mixers )
  • Stock#: 17299

    USED PADDLE MIXER 5 CUBIC FOOT CAPACITY


    Paddle mixer, approximately 5 cubic foot working capacity. Stainless steel jacketed chamber, air cylinder actuated center bottom discharge. Mounted on a stand supplying an approximately 48″ discharge height. Mixer is chain and sprocket driven by a 5 HP gear head motor. Includes a starter.

  • Array ( [0] => miscellaneous [1] => mixers [2] => ribbon-blenders [3] => miscellaneous [4] => mixers [5] => ribbon-blenders )
  • Stock#: 17022

    USED JH DAY FA3.5 NAUTA MIXER / DRYER


    Used 3.5 cubic foot JH Day Nauta mixer / dryer. 304 stainless steel construction rated vacuum internal at 353 degrees F. Jacketed for 125 PSI at 353 degrees F. 5HP drive through a gear reducer. Mounted on legs. S/N 42408. Manufactured 1988. JH Day certification number 1759.

  • Array ( [0] => blenders [1] => high-intensity-mixers [2] => mixers [3] => blenders [4] => high-intensity-mixers [5] => mixers )
  • Stock#: 16845

    USED PATTERSON KELLY 10 CUBIC FOOT V-BLENDER


    Patterson Kelly 10 cubic foot stainless steel V-Blender, S/N 27643, mounted on a stand with a 1.5 HP 1,735 RPM 575-Volt motor, gearbox has a 21.32:1 reduction ratio for an output of 82 RPM, machine is rated for 90 Lbs. per cubic foot material density, 8″ OD outlet.

  • Array ( [0] => mixers [1] => ribbon-blenders [2] => mixers [3] => ribbon-blenders )
  • Stock#: 16783

    USED 40 CUBIC FOOT DOUBLE RIBBON MIXER


    Stainless steel double ribbon blender with a jacketed chamber, approximately 40 cubic foot working capacity. Unit has a 3 piece cover air cylinder actuated center bottom discharge. No mixer stand is included. Unit is currently mounted on legs, supplying an approximately 6″ discharge height. Mixer is chain and sprocket driven by an approximately 10HP gear head motor supplying 155 RPM output. Unit has a 6″ diameter pinion and a 24″ diameter bull gear.

  • Array ( [0] => feeders [1] => mixers [2] => feeders [3] => mixers )
  • Stock#: 16622

    USED TUSKIN P1076 LIQUID COLORANT MIXER


    Tuskin Equipment Corporation model P1076 liquid colorant mixer, S/N 140341. 1/6HP 110V 40 RPM motor. 4″ OD mixer chamber, coats up to 210 Lbs. per hour pellets. 2″ OD material feed throat, 6″ x 6″ feed throat mounting under in-feed hopper and directly to feed throat of process machine. Appears to have never been used.

    Two are available.

  • Array ( [0] => used-equipment [1] => high-intensity-mixers [2] => mixers [3] => used-equipment [4] => high-intensity-mixers [5] => mixers )
  • Stock#: 3854

    USED LITTLEFORD K1200


    Littleford PVC cooler model K1200, S/N none. 43.2 cubic foot total capacity and a 26 cubic foot working capacity. Interior bowl is manufactured of stainless steel and is jacketed for heating or cooling application. Blades are driven by a 25HP motor with a bottom auger discharge.

  • Array ( [0] => used-equipment [1] => mixers [2] => used-equipment [3] => mixers )
  • Stock#: 6915

    USED GELIMAT COMPOUNDER 10 LITER CAPACITY


    Gelimat high speed compounder with a nominal capacity of 10 liters (10″ x 14 ” mixing area), 8 Lbs. batch size. 75HP 230/460V 1,180 RPM motor. Direct feed top hopper direct drive with clutch brake system.