-
Stock#: 16875
USED VERSA PROFILE PULLER / CUTTER
VERSA MODEL CM44 PULLER / FLY CUTTER, NO S/N, 4″ X 12″ BELT AREA, HAND CRANK ADJUSTABLE HEIGHT BELT SEPARATION, 3″ OD MAXIMUM PROFILE, SINGLE BLADE CUTTER, HAS WHEEL COUNTER AND LINE SPEED MONITOR, 230 VOLT INPUT POWER, CUTTER IS POWERED BY A 1.5 HP 115/208/230 VOLT 1725 RPM MOTOR, BELT PULLER IS POWERED BY A 230 VOLT MOTOR THRU 5:1 GEARBOX, MOTOR TO GEARBOX TIMING BELT CONFIGURATION, WITH STARTERS AND CONTROLS
-
Stock#: 16690
USED GOODMAN FLY KNIFE CUTTER
GOODMAN FLY KNIFE CUTTER, S/N 5902, 10 HP 480 VOLT MOTOR, DIGITAL CUT LENGTH READOUT, 4.5″ OPENING WITHOUT PROFILE BUSHING, MOUNTED ON LEVELING / HEIGHT ADJUSTMENT PADS, INCLUDES DISCONNECT
-
Stock#: 16583
USED BELLAFORM CYCLO CUTTER
BELLAFORM CYCLO CUTTER, S/N 3.28-00014, 480 VOLT 3-PHASE OPERATION, 2013 MODEL YEAR, 1.8 KW SERVO MOTOR, 40MM MAXIMUM OD PROFILE, UP TO 6000 CUTS PER MINUTE CONTINUOUS, 300 CUTS PER MINUTE NON-CONTINUOUS, NO CUTTER BLADE
-
Stock#: 15075
DAVIS STANDARD DSC-U2 LAB ROTARY KNIFE CUTTER
DAVIS STANDARD MODEL DSC-U2 ROTARY KNIFE CUTTER, S/N 17368, LAB SIZE
-
Stock#: 5657
PROGRESSIVE SYSTEMS DUAL RIP SAW
PROGRESSIVE SYSTEMS DUAL RIP SAW, APPROXIMATE 10′ WIDE AREA, TWO 14″ DIAMETER BLADES EACH MANUALLY ADJUSTABLE AND EACH DRIVEN BY A 10 HP 230/460 VOLT 1745 RPM MOTOR, 44″ TABLE HEIGHT, MOUNTED ON CASTERS
-
Stock#: 5654
SAKAS TS110 TABLE STYLE PROFILE SAW
SAKAS TABLE SAW MODEL TS110, S/N 15589, 3 UP-ACTING 10″ DIAMETER BLADES, UNDERCUT, EACH DRIVEN BY A 5 HP MOTOR, OVERALL DIMENSION ARE 5’W X 13’L X 6”T
-
Stock#: 4715
CONAIR/GATTO HS-2-4 PROFILE SAW
CONAIR/GATTO MODEL HS-2-4 PROFILE SAW, 2 HP 480 VOLTS 3 PHASE, 10″ HIGH SPEED STEEL BLADE, PNEUMATIC HOLD-DOWNS, TUBING CAPACITY 0 – 2 3/8″ OR UP TO PROFILES 2″ X 4″ WIDE, 10″ TABLE TRAVEL, DIMENSIONS ARE 43 3/4″ X 32 1/4″ X 57 1/2″
-
Stock#: 3822
SAKAS T24 DUAL SAW
SAKAS MODEL T24 DUAL PROFILE SAW, S/N 16487, DUAL-10″ DIAMETER BLADES, 5 HP MOTOR FOR EACH SAW, TOP AND BOTTOM VACUUM SAWDUST TAKE OFF
-
Stock#: 10257
OEM INC DOWN-CUT PROFILE SAW
OEM INC DOWN-CUT PROFILE SAW, S/N OEM200-2665, MODEL HS4/24-EXT, 16″ DIAMETER BLADE, 2 HP 460 VOLT MOTOR, BELT DRIVE, PNEUMATIC HOLD DOWN CLAMPS, ADJUSTABLE HEIGHT LEGS
-
Stock#: 6161
KILLION 2″ SERVO CUTTER
KILLION 2″ SERVO CUTTER, S/N 13489, CONNECTIONS FOR BLOW-OFF, CONVEYOR, ENCODER, AND ELECTRONIC EYE, TOUCHPAD DIGITAL CONTROLS, MOUNTED ON CASTERS
-
Stock#: 5336
GOODMAN TRAVELING UP-CUT PROFILE SAW
GOODMAN TRAVELING UPCUT PROFILE SAW, S/N 4796, 9″ OD BLADE, LENGTH CONTROL, 480 VOLT OPERATION, PNUEMATIC HOLD DOWN
-
Stock#: 4714
GATTO CS-7-24 PROFILE SAW
GATTO MODEL CS-7-24 PROFILE SAW, RIGHT TO LEFT OPERATION, 7″ OD MAXIMUM PROFILE, 480 VOLTS 3 PHASE OPERATION, 5 HP DRIVE MOTOR, 20″ CARBIDE TIP BLADE, 24″ MAXIMUM TABLE TRAVEL, 12 CUTS PER MINUTE MAXIMUM, 42″ CENTERLINE HEIGHT (+ OR – 2″), DIMENSIONS ARE 34″ X 58.5″ X 84″, APPROX 1500 LBS
-
Stock#: 10620
SAKAS UP-CUT PROFILE SAW
SAKAS UP-CUT PROFILE SAW, 14″ DIAMETER BLADE, CROSS CUT OR TRAVERSING CAPABILITY, 2 HP 230/460 VOLT 3460 RPM MOTOR
-
Stock#: 10676
UNKNOWN MANUFACTURE UP CUT PROFILE SAW
UNKNOWN MANUFACTURE UP CUT PROFILE SAW
-
Stock#: 12709
SICA TPK-5-25 PLANETARY PIPE SAW
SICA MODEL TPK-5-25 PLANETARY PIPE SAW, S/N 521032A, RATED FOR PIPE FROM 50mm (2″) UP TO 250mm (9.8″) WITH A MAXIMUM WALL THICKNESS OF 27mm (1″), 1100mm (43″) TRAVEL, OMRON SYSDRIVE CONTROL, 480/3/60 OPERATION, MANUFACTURED 12/1996, MEASURES 126″L X 52″W X 87″H, APPROX 1400 KG
-
Stock#: 14539
BATTENFELD SPR125P UP-CUT PROFILE SAW
BATTENFELD MODEL SPR125P UP-CUT PROFILE SAW, S/N 9648-6740, 20″ LEFT TO RIGHT OPERATION, APPROXIMATE 16.5″ DIAMETER UP-CUT BLADE, 230mm X 90mm MAXIMUM PROFILE CROSS SECTION, 125mm MAXIMUM PIPE DIAMETER, 480 VOLT OPERATION, PNEUMATIC HOLD DOWNS, 7.5m MAXIMUM SPEED PER MINUTE
-
Stock#: 14775
GOODMAN FLY KNIFE CUTTER
GOODMAN FLY KNIFE CUTTER, S/N 3539, 3.25″ PROFILE OPENING (NO BUSHING), 3 HP MOTOR THRU GEARBOX, 3/4 HP VACUUM CLUTCH, WITH CONTROLS
-
Stock#: 2018
VERSA 45W PULLER / CUTTER
VERSA MODEL 45W CUTTER/PULLER, S/N 45067, 0 TO 2-1/4″ OD CAPACITY, DIGITAL READOUT, ADJUSTABLE PULL ROLLS, HOUR METER, 2 HP DRIVE MOTOR
-
Stock#: 12921
CONAIR UC-4-18 UP CUT SAW
CONAIR MODEL UC-4-18 UP CUT SAW, S/N 79822, 16″ DIAMETER BLADE, 230/3/60 OPERATION, MOUNTED ON CASTERS WITH LEVELING/LOCKING PADS