Array ( [0] => ribbon-blenders [1] => ribbon-blenders )
  • Stock#: 17259

    USED 100 CUBIC FOOT CAPACITY RIBBON MIXER


    Used 100 cubic foot capacity double ribbon blender. Approximate 39″ wide x 42″ deep x 120″ long jacketed trough with end bottom outlet. Has two pneumatically actuated trough covers. Driven by a 20 HP motor thru a gearbox. no starter or controls included.

  • Array ( [0] => just-arrived [1] => mixers [2] => ribbon-blenders [3] => just-arrived [4] => mixers [5] => ribbon-blenders )
  • Stock#: 17184

    USED EIRICH/AMERICAN PROCESS SYSTEMS T-500 PADDLE/RIBBON MIXER


    ONE (1) USED EIRICH / AMERICAN PROCESS SYSTEMS MODEL T-500 CYLINDRICAL RIBBON/PADDLE MIXER HAVING A TOTAL VESSEL VOLUME OF 854 CU. FT. VESSEL MEASURES 8′ IN DIAMETER X 17′ LONG. ALL CONTACT PARTS ARE MANUFACTURED OF 316 STAINLESS STEEL. TANK IS ½ THICK WITH 1″ THICK END PLATES. MAIN SHAFT IS 6.5″ SOLID 316 STAINLESS STEEL. RIBBONS MEASURE ½ “THICK X 3″. PADDLES ARE ¾” THICK. 304 STAINLESS STEEL DIMPLE JACKET IS ASME CODED AND RATED TO 150 PSI @ 350 DEGREES F. JACKET HAS FOUR (4) 2″ INLETS AND FOUR (4) 2″ OUTLETS. DISCHARGE IS VIA A 24″ DIAMETER CARBON STEEL SCREW CONVEYOR. APPROXIMATE OVERALL DIMENSIONS OF THE UNIT ARE 32′ X 8′ X 8′. UNIT WEIGHS 34,355 POUNDS. RIBBON AND PADDLES ARE DIRECT DRIVEN BY A 75 HP AC MOTOR WITH DYNAMIC COUPLING THROUGH A EURO DRIVE GEAR REDUCER WITH A 147.56/1 REDUCTION RATIO ALLOWING FOR A 12-RPM ROTOR SPEED. 24″ DIAMETER CLAMPED MANWAY ON TOP. NATIONAL BOARD NUMBER: 62. 42″ X 42″ CLEAN OUT DOOR. HAS END BOTTOM DISCHARGE APPROXIMATELY 10″ OD FOR CLEAN OUT. MANUFACTURED 1995. SERIAL NUMBER 4305A. SHOP ORDER NUMBER 4305

  • Array ( [0] => just-arrived [1] => mixers [2] => ribbon-blenders [3] => just-arrived [4] => mixers [5] => ribbon-blenders )
  • Stock#: 17183

    USED LOX 66 CU FT DOUBLE RIBBON MIXER


    66 CUBIC FOOT LOX DOUBLE RIBBON BLENDER, S/N 70805, MANUFACTURED IN 1990. HAS STAINLESS STEEL SHELL AND JACKET WITH MAXIMUM JACKET WORKING PRESSURE 125 PSI AT 350 DEGREES F. NATIONAL BOARD #3982. HAS APPROXIMATELY 25 HP MOTOR

  • Array ( [0] => miscellaneous [1] => mixers [2] => ribbon-blenders [3] => miscellaneous [4] => mixers [5] => ribbon-blenders )
  • Stock#: 17022

    USED JH DAY FA3.5 NAUTA MIXER / DRYER


    USED 3.5 CUBIC FOOT JH DAY MODEL FA3.5 NAUTA MIXER / DRYER, 304 STAINLESS STEEL CONSTRUCTION, RATED VACUUM INTERNAL AT 353 DEGREES F. JACKETED FOR 125 PSI AT 353 DEGREES F. 5 HP DRIVE THROUGH A GEAR REDUCER. MOUNTED ON LEGS. SERIAL: 42408-1759. MANUFACTURED 1988. DAY CERTIFICATION # 1759

  • Array ( [0] => mixers [1] => ribbon-blenders [2] => mixers [3] => ribbon-blenders )
  • Stock#: 17006

    USED ROSS 42N-05S RIBBON MIXER


    CHARLES ROSS & SONS MODEL 42N-05S RIBBON MIXER, S/N 111300, STAINLESS STEEL CONSTRUCTION, 5 CUBIC FOOT 7 GALLON WORKING CAPACITY, 7 CUBIC FOOT 52 GALLON FULL CAPACITY, STAINLESS STEEL DOUBLE RIBBON DRIVEN BY A 5 HP 460 VOLT MOTOR THRU GEARBOX FOR UP TO A 70 RPM AGITATOR SPEED, 17″ WIDE X 38″ LENGTH X 21″ DEPTH TROUGH SIZE, OVERALL DIMENSIONS WITHOUT INSTALLED AND INCLUDED POWDER RECEIVER AND HOPPER IS 68″ X 37″ X 64″, PNEUMATICALLY OPERATED SPHERICAL VALVE BOTTOM CENTER DISCHARGE, INCLUDES K-TRON STAINLESS STEEL POWDER RECEIVER MODEL S4-2415 SETUP FOR 3″ OD IN-FEED LINE, ALSO INCLUDES WALL MOUNT CONTROL CABINETS

  • Array ( [0] => just-arrived [1] => mixers [2] => ribbon-blenders [3] => just-arrived [4] => mixers [5] => ribbon-blenders )
  • Stock#: 16783

    USED 40 CUBIC FOOT DOUBLE RIBBON MIXER


    USED APPROXIMATELY 40 CUBIC FOOT WORKING CAPACITY STAINLESS STEEL DOUBLE RIBBON BLENDER, JACKETED CHAMBER. HAS 3-PIECE COVER, AIR CYLINDER ACTUATED CENTER BOTTOM DISCHARGE. NO MIXER STAND INCLUDED. CURRENTLY MOUNTED ON LEGS SUPPLYING APPROXIMATELY 6″ DISCHARGE HEIGHT. MIXER IS CHAIN AND SPROCKET DRIVEN, APPROXIMATELY 10 HP GEAR HEAD MOTOR SUPPLYING 155 RPM OUTPUT. HAS 6″ DIAMETER PINION, 24″ DIAMETER BULL GEAR

  • Array ( [0] => mixers [1] => ribbon-blenders [2] => mixers [3] => ribbon-blenders )
  • Stock#: 16303

    USED STAINLESS RIBBON BLENDER


    USED RADICON MODEL M007218.BANV RIBBON BLENDER, S/N FR08156736, 304 STAINLESS STEEL CONSTRUCTION, APPROXIMATELY 40 CUBIC FOOT WORKING CAPACITY, APPROXIMATE 73″ LONG X 54″ WIDE X 59″ DEEP, RIBBON IS 3″ WIDE X 1/2″ THICK. 8″ CENTER BOTTOM OUTLET, APPROXIMATE 10 HP 3/60/230-460/1760 RPM MOTOR WITH 18:1 GEARBOX RATIO, MOUNTED ON LEGS

  • Array ( [0] => ribbon-blenders [1] => ribbon-blenders )
  • Stock#: 14933

    H. C. DAVIS HD-5 RIBBON BLENDER


    H.C. DAVIS SONS MANUFACTURING MODEL HD-5 RIBBON BLENDER, S/N 2005346, 30 CUBIC FOOT / 1500 LB CAPACITY, STAINLESS STEEL MIXING BOWL AND DOUBLE RIBBON BLADE, CARBON STEEL SUPPORT FRAME, POWERED BY A 5 HP 230/460 VOLT THRU A GEARBOX, 32″ X 21″ HINGED PARTIAL TOP, PNEUMATIC OPERATED 6″ X 6″ END DISCHARGE TO A PREMIER PNEUMATICS 3″ OD AUGER DISCHARGE WITH 45″ HEIGHT CLEARANCE, AUGER IS POWERED BY A 1/4 HP MOTOR, AUGER ASSEMBLY CAN BE REMOVED TO USE THE STANDARD 6″ X 6″ END DISCHARGE, COMPLETE WITH SYSTEM CONTROLS, ALSO INCLUDES A PREMIER PNEUMATICS STAINLESS STEEL VACUUM LOADER, VERY NICE CONDITION

  • Array ( [0] => ribbon-blenders [1] => ribbon-blenders )
  • Stock#: 12515

    SPROUT-WALDRON 40 CUBIC FOOT DOUBLE RIBBON MIXER


    SPROUT-WALDRON MODEL 90 DOUBLE RIBBON MIXER, S/N 81-0135, ALL CARBON STEEL CONSTRUCTION, 3 HP 460 VOLT 1760 RPM MOTOR TO 194.6:1 GEARBOX TO CHAIN AND SPROCKET DRIVEN CARBON STEEL 7/16″ THICK MIXER BLADE, 30″ X 72″ X 34″ DEEP MIXING BOWL WITH 8″ NON-GATED BOTTOM CENTER DISCHARGE, APPROX. 40 CUBIC FEET