Array ( [0] => just-arrived [1] => thermoforming [2] => just-arrived [3] => thermoforming )
  • Stock#: 17853

    USED BROWN MC5500 THERMOFORMER


    Used 50″ x 42″ Brown Model MC5500 thermoformer. S/N 9236R. Maximum depth of draw 7″. Toggle actuated bottom platen via hydraulic motor. Bottom platen via hydraulic motor, air actuated top platen. Includes Cal-rod top and bottom oven approximately 168″ long. No unwind stand included. Previously used inline. Equipped with servo driven chain indexing.

  • Array ( [0] => thermoforming [1] => thermoforming )
  • Stock#: 17845

    USED TSL 3.0 44″ WIDE TRIM PRESS


    Used TSL Model V3.0 44″ wide trim press. S/N 1063. Trim press has 2-tie bar platen with servo drive and approximately 14″ high x 41″ wide product discharge window. Includes canopy feed for thermo-formed sheet. Includes operator controls.

  • Array ( [0] => just-arrived [1] => thermoforming [2] => just-arrived [3] => thermoforming )
  • Stock#: 17854

    USED TSL V5.0HD TRIM PRESS


    Used TSL model V5.0HD servo actuated trim press. Has approximately 20″ x 48″ material discharge window. Servo is driven by a 2-tie bar platen, each 4.5″ OD. Includes canopy with powered feed and operator control panel.

  • Array ( [0] => thermoforming [1] => thermoforming )
  • Stock#: 14891

    FUTURE MOLD CORPORATION MODEL FMLR3300 LIP ROLLER


    Future Mold Corporation model FMLR3300 lip roller, no S/N, includes controls.

    Two are available.

  • Array ( [0] => thermoforming [1] => thermoforming )
  • Stock#: 14892

    USED BROWN MODEL T-360 TRIM PRESS


    Brown model T-360, trim press, S/N 32461. 10HP 230/460V motor, 16″ x 50″ window canopy and a control panel are not included.


  • Array ( [0] => thermoforming [1] => thermoforming )
  • Stock#: 6725

    BROWN THERMOFORMING LINE MODEL C4201


    Brown C4201 thermoformer, S/N 103020404/RW. 480V 433.8 amps, 12″ to 41″ sheet size, clamshell right hand hinge oven style, 170″ oven length. Nine heater zones on top and six zones on bottom. Indramat drive, 15″ top platen opening, pneumatic 10.125″ bottom platen opening, 4″ depth of draw, 40″ x 40″ maximum mold size. Auto lube station, unwind stand. Includes Brown model T-301 trim press, S/N 10727. 480V 80A auto lube station, complete with canopy and stand-alone control panel.

    Thermoformer was built in the late 80’s and rebuilt by Lyle in 1995.

    Former is 31′ l x 9′ w x 9′ h, 20,000 Lbs scrap, 10′ x 3′ x 72,000 Lbs. unwind, 7′ x 5′ x 5,400 Lbs. guard, 6′ x 3′ x 7,100 Lbs. tpress 15′ x 8′ x 9′ 15,000 Lbs. canopy, 12’x7’x5′-600lbs tpress cp, 6′ x 3′ x 7′ 400 Lbs.

  • Array ( [0] => thermoforming [1] => thermoforming )
  • Stock#: 6635

    USED BROWN THERMOFORMER MODEL CS-4500


    Brown CS-4500 thermoformer, S/N 12881, manufactured in May of 1995. 40″ w x 42″ l maximum mold size. Maximum mold weight top platen is 1,000 Lbs., maximum mold weight on bottom platen is 1,600 Lbs. 7″ maximum depth draw above and below the sheet line. Maximum sheet width is 42″. Maximum forming pressure is 100 PSI. Indramat three axis AC servo drive. Top platen up and down, bottom platen up and down, and material index forward. Index length of zero to 60″. Index speed of zero to 206 inches per second. Index acceleration maximum 600 inches per second. Index jog speed of zero to 30 inches per second. Oven is 168 inches long with 4 stops, calrod bottom and ceramic top and an auto lube system. 240 kVA average power consumption.

  • Array ( [0] => thermoforming [1] => thermoforming )
  • Stock#: 12280

    LYLE THERMOFORMER MODEL 150FH


    Lyle model 150FH thermoformer, S/N 038271 / 104175001. 480V/3ph/60Hz operation, 593 amps. 200″ long oven with quartz top elements and calrod bottom, 4 shots @ 50″ 50″w x 50″l maximum mold size. 53″ maximum sheet width maximum 9″ draw up and down 16″ bottom stroke 11″ top stroke hydraulic operation with electric servo motor indexing TPC-9400 computer controls model 150P2 trim press, S/N 035047 / 103040007 controlled by relay logic interfaced to a TPC-9400 computer on former stationary platen window is 16.25″h x 50.5″w. Manufactured in December 1996. Trim press manufactured January of 1995, complete with reversible canopy. Vacuum pump for vacuum system is not included.