POLYETHELYNE TANKS

0 out of 5

Categories: / .

Pump Tank Stations

Polyethylene Reservoirs from 450 to 3200 Gallons

Temptek pump tank stations are a two part system, a reservoir and pumping station with one or two pumps. The assembly is designed circulate a fluid medium (typically water or water-glycol solution) through several process applications through out your plant. Pump tank stations work with cooling tower systems or chilling systems to make a central water system.

• Capacities From 450 – 3200 Gallons
• Tower or Chilled Water Systems
• Pumps from 2 – 60 HP
• Flows from 40 – 1250 GPM
• Seamless Rotational Molded Reservoir
• 10 Year Tank Warranty

The PPT Series pump tank station is very space efficient. It uses the vertical dimension for water storage, and uses an integral pump platform deck to minimize floor space footprint. The high flow, high turbulent pumps offer maximum heat transfer across the process. The patent pending reservoir is a seamless, one piece rotationally molded polyethylene reservoir. This reservoir is rust and corrosive free, and will not degrade, regardless of water quality. Pump assemblies are mounted on a structural steel deck and attached to the tank via flexible connectors. This pump tank is designed and engineered for round-the-clock operations with minimal service, providing maximum return on investment.

Components are shipped loose and field assembled.
All drawings are supplied for easy assembly. Available options can be factory assembly and wired. Consult factory for details.

TANK CONSTRUCTION
• One piece, seemless, cylindrical shape reservoir
• Rotationally molded linear low density polyethylene
• Drain valve
• Overflow port
• Hot / cold section partition (baffle)
• Temperature gauges for each partition
• Water-level control (float type)
• Flange pump connections
• Multiple pump connections
• Tank insulating on chilled water systems (optional)
• Tank lid

ELECTRICAL
• Prewired magnetic pump motor starters
• Nema 1 rated
• Overload protection
• Thermostat control of tower fan (where applicable)

PUMPS
• Structural steel deck for pump mounting
• Flexible connections
• Centrifugal, motor driven
• Bronze impeller
• Suction service valve kit
• Discharge service valve kit

WARRANTY & SERVICE
• 10 year tank failure warranty
• 1 year on mechanical components
• Nationwide network of service contractors

OPTIONS
• Standby pump and discharge manifold with isolation valves
• Prewired control cabinet for starters and controls
• Mounting and wiring all components.

PPT SERIES SPECIFICATIONS

MODEL # PPT-450 PPT-850 PPT-1600 PPT-3200
WATER CAPACITY TO OVERFLOW 450 850 1600 3200
WATER CAPACITY TOWER WATER 225 425 800 1600
WATER CAPACITY CHILLED WATER 350 675 1200 2400
CONNECTION: WATER MAKE-UP 1″ NPT 1″ NPT 1″ NPT 1″ NPT
CONNECTION: TANK DRAIN 1 1/2″ NPT 1 1/2″ NPT 1 1/2″ NPT 1 1/2 NPT
CONNECTION: TANK OVERFLOW 4″ NPT 4″ NPT 6″ NPT 6″ NPT
DIMENSION: HEIGHT 60″ 72″ 96″ 96″
DIMENSION: WIDTH 48″ 60″ 72″ 160″
DIMENSION: DEPTH 50″ 62″ 74″ 74″
DIMENSION: DEPTH WITH PUMP BASE 36″ 36″ 48″ 48″
WEIGHT DRY 860 LBS 1590 LBS 2243 LBS 4636 LBS
WEIGHT OPERATING 2750 LBS 5160 LBS 8963 LBS 18076 LBS
WEIGHT MAXIMUM 4640 LBS 8730 LBS 15683 LBS 31516 LBS
WEIGHT SHIPPING 860 LBS 1590 LBS 2243 LBS 4636 LBS

P SERIES PUMP SPECIFICATIONS

PROCESS / STANDBY PUMP MODEL PP-2 PP-3 PP-5 PP-7.5 PP-10 PP-15 PP-20 PP-25 PP-30 PP-40 PP-50 PP-60
PUMP HP 2 3 5 7.5 10 15 20 25 30 40 50 60
PUMP GPM / PSI 40 / 40 60 / 60 90 / 60 150 / 60 210 / 60 360 / 60 405 / 60 525 / 60 600 / 60 900 / 60 1100 / 60 1250 / 60
FULL LOAD AMPS @ 230 / 3 / 60 6.8 9.6 15.2 22 28 42 54 68 84 104 130 154
FULL LOAD AMPS @ 460 / 3 / 60 3.4 4.8 7.6 11 14 21 27 34 42 52 65 77

TP SERIES PUMP SPECIFICATIONS

TOWER / EVAPORATOR PUMP MODEL TP-2 TP-3 TP-5 TP-7.5 TP-10 TP-15 TP-20 TP-25 TP-30 TP-40
PUMP HP 2 3 5 7.5 10 15 20 25 30 40
PUMP GPM / PSI 60 / 30 90 / 30 210 / 30 255 / 30 405 / 30 525 / 30 810 / 30 900 / 30 1100 / 30 1750 / 30
FULL LOAD AMPS @ 230 / 3 / 60 6.8 9.6 15.2 22 28 42 54 68 84 104
FULL LOAD AMPS @ 460 / 3 / 60 3.4 4.8 7.6 11 14 21 27 34 42 52