Array ( [0] => just-arrived [1] => extruders-3-5-10 [2] => pelletizing-lines [3] => pelletizing-spin-dryers [4] => recycling [5] => just-arrived [6] => extruders-3-5-10 [7] => pelletizing-lines [8] => pelletizing-spin-dryers [9] => recycling )
  • Stock#: 16825

    USED 6″ DAVIS STANDARD / BERLYN PELLETIZING LINE


    34: L/D ELECTRICALLY HEATED AND VENTED BARREL, CLOSED LOOP WATER COOLING SYSTEM WITH CAST ALUMINUM HEATERS, BERLYN EXTRUDERS TEMPERATURE CONTROLS PANEL WITH WATLOW CONTROLS FOR 7 BARRELS ZONES, 4 DOWNSTREAM ZONES, AND ONE MELT TEMPERATURE.  POWERED BY A 400 HP 500 VOLT 1750/1900 RPM BALDOR D/C MOTOR WHICH IS DIRECT REAR COUPLED TO THE GEAR REDUCER, NO DRIVE CONTROL FOR THE MOTOR IS PROVIDED, INCLUDES ONE FEED SCREW FOR POLYSTYRENE AND ONE FOR ABS. SYSTEM ALSO INCLUDES ONE 6” MODEL BCM-6000 SLIDE PLATE SCREEN CHANGER, S/N 050H237, WITH SUPPORT STAND AND BERLYN 240 VOLT HYDRAULIC POWER PACKAGE, BERLYN UNDERWATER PELLETIZER WITH SEVERAL DIE PLATES AND SPIN DRYER, S/N 050H237, K TRON FEED SYSTEM WITH FOUR MODEL K2G FEEDERS WITH RECEIVERS, CYCLONES, AND PINCH VALVES, ONE MODEL K2M/ T60 WITH LOAD CELL HOPPER, K-TRON CONTROL SYSTEM SCM MODULE WITH KSL MAIN CONTROL CABINET, PRO NO S17228-0, THIS SYSTEM WAS OPERATING AND PRODUCING APPROXIMATELY 3300 LBS/HR ABS PELLETS WHEN IT WAS TAKEN OUT OF SERVICE AND WAS LAST OPERATED ON ABS REGRIND MATERIAL

  • Array ( [0] => just-arrived [1] => shredders [2] => just-arrived [3] => shredders )
  • Stock#: 16826

    USED REPUBLIC MACHINE FALCON 32 SHREDDER


    REPUBLIC MACHINE FALCON 32 SHREDDER, S/N 120132351020, MODEL RM32-20-F-10-1-45-D, 2012 MODEL YEAR IN NEAR NEW CONDITION, SINGLE ROW OF 22 EACH 40mm X 40mm CUTTERS MOUNTED TO A 10″ DIAMETER ROTOR, SINGLE POSITION BED KNIFE, POWERED BY A 20 HP 460 VOLT MOTOR, 3 HP DUAL SPEED HYDRAULIC RAM CONTROL, 8″ PNEUMATIC TAKE OFF BIN, ALLEN BRADLEY MICROLOGIX 1400 PLC CONTROLS, 2″ HOLES SCREEN, HOPPER INLET IS 31″ WIDE X 26″ TALL, MACHINE DIMENSIONS ARE 9′ X 69″ X 88″, MACHINE WEIGHS APPROXIMATELY 8,000 LBS, INCLUDES MANUAL AND ELECTRICAL DRAWINGS

  • Array ( [0] => just-arrived [1] => extruders-34-3 [2] => just-arrived [3] => extruders-34-3 )
  • Stock#: 16828

    USED DAVIS STANDARD 2.5″ 24:1 L/D EXTRUDER


    DAVIS STANDARD MODEL 25IN25 2.5″ EXTRUDER, S/N J7012, SO# 98057, ORIGINALLY MANUFACTURED 8/85 AND REBUILT BY DAVIS STANDARD IN 2003. 24:1 L/D ELECTRICALLY HEATED, WATER COOLED (CLOSED LOOP) BARREL AT A 42″ CENTER-LINE HEIGHT. GEARBOX HAS A REDUCTION RATIO OF 17.26:1 AND IS RATED AT 75 HP AT A SERVICE FACTOR OF 1.25 TO 1. GEARBOX IS BELT DRIVEN BY A 50 HP AC MOTOR WITH INVERTER ALLOWING FOR A MAXIMUM SCREW SPEED OF A 100 RPM. INTEGRAL CONTROL PANEL HAS HARDWARE FOR TEMPERATURE CONTROL BUT LACKS INSTRUMENTS OR TOUCH SCREEN, C-CLAMP ON DISCHARGE. INCLUDES TWO SCREWS, 460/3/60 INPUT

  • Array ( [0] => just-arrived [1] => extruders-34-3 [2] => just-arrived [3] => extruders-34-3 )
  • Stock#: 16829

    USED DAVIS STANDARD 2.5″ 24:1 L/D EXTRUDER


    DAVIS STANDARD MODEL 25IN25 2.5″ EXTRUDER, S/N J7013, SO# 98057, ORIGINALLY MANUFACTURED 8/85 AND REBUILT BY DAVIS STANDARD IN 2003. 24:1 L/D ELECTRICALLY HEATED, WATER COOLED (CLOSED LOOP) BARREL AT A 42″ CENTER-LINE HEIGHT. GEARBOX HAS A REDUCTION RATIO OF 17.26:1 AND IS RATED AT 75 HP AT A SERVICE FACTOR OF 1.25 TO 1. GEARBOX IS BELT DRIVEN BY A 50 HP DC MOTOR WITH SCR ALLOWING FOR A MAXIMUM SCREW SPEED OF A 100 RPM. INTEGRAL CONTROL PANEL HAS HARDWARE FOR TEMPERATURE CONTROL BUT LACKS INSTRUMENT OR TOUCH SCREEN, C-LAMP ON DISCHARGE. INCLUDES TWO SCREWS, 460/3/60 INPUT

  • Array ( [0] => just-arrived [1] => lab-testing-equipment [2] => high-intensity-mixers [3] => just-arrived [4] => lab-testing-equipment [5] => high-intensity-mixers )
  • Stock#: 16830

    USED HENSCHEL FM10US LAB HIGH INTENSITY MIXER


    VESSEL VOLUME OF 10 LITERS AND A WORKING CAPACITY OF APPROXIMATELY 2 LITERS OR .2 CUBIC FT, INTERIOR OF BOWL IS MANUFACTURED OF STAINLESS STEEL AND IS JACKETED, MIXER IS EQUIPPED WITH THREE TIER BLADES, INCLUDES LID WITH BAFFLE, THERMOCOUPLE, AND TOUCH SCREEN CONTROLS

  • Array ( [0] => just-arrived [1] => extruders-twin-screw [2] => just-arrived [3] => extruders-twin-screw )
  • Stock#: 16620

    USED STEER ENGINEERING 12mm TWIN SCREW EXTRUDER


    STEER ENGINEERING PHARMACEUTICAL TWIN-SCREW EXTRUDER, S/N EA00427, MODEL OMICRON 12P, NEW 2014. SCREW DIAMETER IS 12 MM, DIAMETER RATIO (DO/DI) IS 1.45, FLIGHT DEPTH IS 1.9, MAX SCREW SPEED IS 900 RPM, 2HP DRIVE, 3/60/480V

  • Array ( [0] => just-arrived [1] => extruders-twin-screw [2] => pelletizing-lines [3] => just-arrived [4] => extruders-twin-screw [5] => pelletizing-lines )
  • Stock#: 16819

    USED 26mm COPERION TWIN SCREW EXTRUDER WITH PELLETIZER


    USED 26MM COPERION MEGA CO-ROTATING TWIN SCREW EXTRUDER. 1400 RPM SCREW SPEED WITH 30 KW AC MOTOR, 2650 RPM AND VFD DRIVE. 460-VOLT AC INPUT. APPROXIMATE 36:1 L/D VENTED AND WATER-COOLED BARREL, WITH TWO BRABENDER GRAVIMETRIC FEEDERS. 1.89:1 GEAR RATIO, TOUCH SCREEN OPERATOR CONTROL, AND STRAND DIE. DOWNSTREAM INCLUDES APPROXIMATE 6″ WATER TROUGH AND BT2.5 SHEER BAY STRAND PELLETIZER. STILL INSTALLED AND OPERATING UNTIL JANUARY 2019. MANUFACTURED IN 2005

  • Array ( [0] => just-arrived [1] => blenders [2] => just-arrived [3] => blenders )
  • Stock#: 16815

    USED PATTERSON THORO BLENDER SYSTEM


    PATTERSON INDUSTRIES 18″ DIAMETER JACKETED THORO BLENDER SYSTEM, S/N 412130-CA11, MAXIMUM WATER PRESSURE IS 125 PSI AT 275 DEGREES, MINIMUM DESIGN METAL TEMPERATURE 32 DEGREES AT 125 PSIG, INCLUDES DELTA THERMAL SYSTEMS MODEL KD331S 12,000 WATT OIL HEATER, S/N 17040, WITH CAGE AND EXHAUST HOOD, ALSO INCLUDES BAUER MODEL DP2.5 AIR COMPRESSOR, 13.5 CFM, 200 PSIG, POWERED BY A 5 HP 480 RPM 230/460 VOLT MOTOR

  • Array ( [0] => just-arrived [1] => mixers [2] => just-arrived [3] => mixers )
  • Stock#: 16783

    USED 40 CUBIC FOOT DOUBLE RIBBON MIXER


    USED APPROXIMATELY 40 CUBIC FOOT WORKING CAPACITY STAINLESS STEEL DOUBLE RIBBON BLENDER, JACKETED CHAMBER. HAS 3-PIECE COVER, AIR CYLINDER ACTUATED CENTER BOTTOM DISCHARGE. NO MIXER STAND INCLUDED. CURRENTLY MOUNTED ON LEGS SUPPLYING APPROXIMATELY 6″ DISCHARGE HEIGHT. MIXER IS CHAIN AND SPROCKET DRIVEN, APPROXIMATELY 10 HP GEAR HEAD MOTOR SUPPLYING 155 RPM OUTPUT. HAS 6″ DIAMETER PINION, 24″ DIAMETER BULL GEAR

  • Array ( [0] => just-arrived [1] => blenders [2] => mixers [3] => just-arrived [4] => blenders [5] => mixers )
  • Stock#: 16741

    USED 400 CUBIC FOOT CAPACITY RIBBON BLENDER


    DOUBLE SPIRAL RIBBON BLENDER HAVING APPROXIMATELY A 400 CUBIC FOOT WORKING CAPACITY. CARBON STEEL CONSTRUCTION. NON-JACKETED TROUGH MEASURES 145″ LONG X 76″ WIDE X 90″ DEEP. 3/8″ THICK RIBBON. END BOTTOM DISCHARGE. RIBBON IS DRIVEN BY APPROXIMATELY A 40 HP MOTOR VIA A BELT DRIVE TO A GEAR REDUCER AND THEN VIA A CHAIN AND SPROCKET FROM THE GEARBOX TO THE RIBBON. UNIT HAS TWO 50″ X 83″ LIDS ON TOP AND ONE 44″ X 76″ OPEN SECTION. OVERALL DIMENSIONS ARE 222″ X 77″ X 107″UNIT WEIGHS APPROXIMATELY 12,000 POUNDS

  • Array ( [0] => just-arrived [1] => shredders [2] => just-arrived [3] => shredders )
  • Stock#: 16739

    USED BALL & JEWEL SB2525 DUAL SHAFT SHREDDER


    BALL & JEWEL MODEL SB2525 DUAL SHAFT SHREDDER, S/N 9703-38277, HAS 25″ X 25″ FEED OPENING, TRAY FEED HOPPER, DRIVEN BY (2) 20 HP 230/460 VOLT MOTORS, HAS APPROXIMATELY 60″ HIGH DISCHARGE HEIGHT, INCLUDES OPERATOR CONTROL PANEL

  • Array ( [0] => just-arrived [1] => extruders-3-5-10 [2] => extrusion-sheet-lines [3] => just-arrived [4] => extruders-3-5-10 [5] => extrusion-sheet-lines )
  • Stock#: 16744

    USED CROWN 4.5″ EXTRUSION SHEET LINE


    CROWN 48” MODEL EXT 4.5 4.5” PLASTIC PET EXTRUSION LINE, CROWN EXTRUDER S/N 1811, (2014), 32:1 L/D RATIO, 250 HP MOTOR, HOPPER MODIFIER, HYDRAULIC SCREEN CHANGER; MAAG MODEL EXTREX 70 MELT PUMP, VENTED BARREL, PARKER TOUCH SCREEN CONTROLS, 48” FLEX LIP DIE, 64” WIDE 3-ROLL SHEET STACK WITH TWO 24” DIAMETER ROLLS AND ONE 16” DIAMETER ROLL, TRIM ROLL ASSEMBLY, DIP TANK ASSEMBLY, HOBBS 2-POSITION WINDER