Array ( [0] => new-equipment [1] => material-handling-en [2] => new-equipment [3] => material-handling-en )
  • SCREW CONVEYORS


    Screw Conveyors

    Screw Conveyors are most effective when moving large amounts of material over short distances. We have developed a standard line of Tubular Screw Conveyors that range in capacity from 50 cu. ft. to 700 cu. ft. per hour. These Screw Conveyors are particularly good for moving dusty material because they can be completely sealed. The direct drive system is more compact and easier to maintain than other commonly used drives. We offer a complete line of screw conveying equipment including: discharge adapters, support stands, suspension brackets, level control switches, and control packages. We can also custom design screw conveyors to fit your particular material handling needs!

    *Coreless Augers – Coreless Augers need no hanger bearing and can incorporate a 60″ radius elbow.

    NOTE: Delivery rates on the chart below are approximations based on average materials under average conditions. Check with us before ordering to make sure the model you have selected will meet your requirements.

    Model No Screw Dia Tube Dia RPM HP Max Length Incline Delivery/Hr
    20-1000 2.7* 3.5″ 345 1.5 50′ 60 Degrees 50 Cubic Feet
    20-2000 2.7* 3.5″ 345 1.5 50′ 45 Degrees 60 Cubic Feet
    20-3000 3.8* 5″ 345 2 30′ 60 Degrees 100 Cubic Feet
    20-4000 3.8* 5″ 345 2 30′ 45 Degrees 120 Cubic Feet
    20-5000 4 5″ 232 2 30′ 60 Degrees 150 Cubic Feet
    20-6000 4 5″ 232 2 30′ 45 Degrees 180 Cubic Feet
    21-1000 6 7″ 232 3 30′ 60 Degrees 280 Cubic Feet
    21-2000 6 7″ 232 3 30′ 45 Degrees 320 Cubic Feet
    21-3000 9 10″ 173 5 30′ 60 Degrees 600 Cubic Feet
    21-4000 9 10″ 173 5 30′ 45 Degrees 700 Cubic Feet

    Granulator Unloaders

    Granulator Unloaders are designed to replace the catch box on many brands of granulator. These units will deliver up to 2000 pounds per hour of ground plastic to a Gaylord
    container or portable storage hopper. These durable, economical units relieve your operator from having to check the fullness of drawers and emptying them, saving
    both down time from over packed drawer and your operators back.

    Standard Features:
    •Direct Gear Drive for low maintenance
    •2.7” Flex Auger in 3.5” OD Tube
    •45 deg. Hardened Elbow
    •60” Discharge Height
    •Custom Drawer to Fit Granulator
    •Controls with Start-Stop Buttons
    •NEMA 12 Electrical
    •Casters, 2 rigid
    •Blue Epoxy paint

    Optional Features:
    •Vibrator
    •Variable Speed Drive
    •Explosion Proof Electrical
    •Level Control Switch
    •Stainless Steel Construction
    •Custom Paints and Matching
    Colors

    Hopper Loaders

    The Hopper Loader is designed to feed pellets, granules and free flowing powders into an overhead hopper or storage vessel. It can be used with bags or portable storage bins. It is often used to avoid climbing ladders with bags or buckets of material. The Hopper Loader is equipped with 2.7″ flex auger that will deliver up to 60 cu. ft. of material to an over head hopper. The unique part about this hopper loader is its easy clean feature. The machine can be broken down for wipe out cleaning in less than two minutes. Hopper Loaders are built to last with a heavy duty body, bear ings, and an adjustable teflon shaft seal to protect the belt drive.

    Standard Features:
    •Flip Over Hopper (for Easy Cleaning)
    •4:1 Belt Drive
    •5 cu.ft. Hopper Capacity
    •Hopper Dimension 24″ x 26″ x 32″ high
    •Quick Disconnect Auger (for easy cleaning)
    •Compressible Teflon Seal
    •Casters, 2 rigid (for Easy Mobility)
    •14 ga. Hopper with 10ga. Base
    •75 deg. Auger Slope
    •Electrical Controls with On-Off Selector
    •NEMA 12 Electrical Enclosure
    •Blue Epoxy Paint

    Optional Features:
    •Bag Breaker Grate
    •Continuous Hinged Cover
    •Vibrator
    •Variable Speed Drive
    •Level Control Switch
    •Stainless Steel Construction
    •Custom Paints and Matching Colors

    Model No. Screw Dia Tube Dia RPM HP Max Length Incline Delivery/Hr
    20-1600 2.7″ 3.5″ 438 .75 12′ 75 Degrees 60 Cubic Feet

    We Also Offer – Call for Details

    Power Hoppers
    Live Bottom Power Hoppers
    High Capacity Live Bottom Bins
  • Array ( [0] => new-equipment [1] => material-handling-en [2] => new-equipment [3] => material-handling-en )
  • STORAGE/SURGE BINS


    Stationary Surge/Storage Bins

    Stationary Surge Storage Bins or Surge Bins keep large quantities of material within very little floor space. They can be filled or emptied using pneumatic or screw conveying equipment. Material storage bins, or Surge Bins, are available in sizes ranging from 25 cu. ft. to 800 cu ft.. Large quantities of material can be stored using very little floor space. They can be filled or discharged using pneumatic or screw conveying equipment. There are many options available to adapt these bins to almost any material
    handling system. Check with us to see just how affordable bulk storage can be!

    Standard Features:
    • 3 x 3 x 1/4 Angle Legs
    • 12 ga. Hopper
    • Bolt Down Foot Pads
    • Loader Mounting Cut Out (250 lbs. Max)
    • 1/3 Hinged Covers
    • Air Box Discharge Flange (16.25″ x 16.25″)
    • Blue Epoxy Paint (Outside Only)

    Optional Features:
    • 12″ x 12″ Slide Gate
    • 6″ x 6″ Discharge Adaptor
    • 6″ Slide Gate
    • 4″ Discharge Spout w/ Slide Gate
    • Filter in Cover
    • 1 1/4″ Pipe Stub in Hopper
    • Level Control
    • 4″ Window
    • Platform w/ Ladder
    • Epoxy Paint Inside
    • Custom Paints and Matching Colors

    All Storage Weight Capacities Based on 35 Lbs Per Cubic Foot Bulk Material Density

    Model # Discharge Overall Height Capacity <—-Description —-> Model # Discharge Overall Height
    44-4500 18″ 4′ 9″ 38 cu ft / 1330 lbs 48″x 48″, 45° Hopper, 21″ Sidewall 44-5500 60″ 8′ 3″
    44-4600 18″ 5′ 9″ 54 cu ft / 1890 lbs 48″x 48″, 45° Hopper, 33″ Sidewall 44-5600 60″ 9′ 3″
    44-4800 18″ 6′ 9″ 70 cu ft / 2450 lbs 48″x 48″, 45° Hopper, 45″ Sidewall 44-5800 60″ 10′ 3″
    45-4500 18″ 5′ 6″ 70 cu ft / 2450 lbs 60″x 60″, 45° Hopper, 24″ Sidewall 45-5500 60″ 9′ 0″
    45-4600 18″ 6′ 6″ 95 cu ft / 3325 lbs 60″x 60″, 45° Hopper, 36″ Sidewall 45-5600 60″ 10′ 0″
    45-4800 18″ 8′ 6″ 145 cu ft / 5075 lbs 60″x 60″, 45° Hopper, 60″ Sidewall 45-5800 60″ 12″ 0″
    45-4900 18″ 10′ 6″ 195 cu ft / 6825 lbs 60″x 60″, 45° Hopper, 84″ Sidewall 45-5900 60″ 14′ 0″
    46-4800 18″ 8′ 4″ 192 cu ft / 6720 lbs 72″x 72″, 45° Hopper, 52″ Sidewall 46-5800 60″ 11′ 10″
    46-4900 18″ 10′ 4″ 264 cu ft / 9240 lbs 72″x 72″, 45° Hopper, 76″ Sidewall 46-5900 60″ 13′ 10″
    44-6500 18″ 5′ 11″ 47 cu ft / 1645 lbs 48″x 48″, 60° Hopper, 22″ Sidewall 44-7500 60″ 9′ 5″
    44-6600 18″ 6′ 11″ 63 cu ft / 2205 lbs 48″x 48″, 60° Hopper, 34″ Sidewall 44-7600 60″ 10′ 5″
    45-6600 18″ 6′ 10″ 75 cu ft / 2625 lbs 60″x 60″, 60° Hopper, 22″ Sidewall 45-7600 60″ 10′ 4″
    45-6800 18″ 8′ 10″ 125 cu ft / 4375 lbs 60″x 60″, 60° Hopper, 46″ Sidewall 45-7800 60″ 12′ 4″
    45-6900 18″ 10′ 10″ 175 cu ft / 6125 lbs 60″x 60″, 60° Hopper, 70″ Sidewall 45-7900 60″ 14′ 4″
    46-6800 18″ 8′ 9″ 162 cu ft / 5670 lbs 72″x 72″, 60° Hopper, 34″ Sidewall 46-7800 60″ 12′ 3″
    46-6900 18″ 10′ 9″ 234 cu ft / 8190 lbs 72″x 72″, 60° Hopper, 58″ Sidewall 46-7900 60″ 14′ 3″

    Portable Storage Bins

    Porta-Stor Bins were designed to replace Gaylords in your bulk material han dling system. You can buy material in bulk and use Bins to distribute the mate rial throughout your plant. These 44″ square, stackable bins can be filled using Surge Bins, Screw Conveyors or Hydraulic Dumpers. They can be discharged though the 4″ bottom slide gate
    or the optional 4 way vacuum ports. These bins are built to last with a 14ga steel hopper and 2″ x 1/4″ angle frame. They are coated with abrasion resistant epoxy inside and out. We can custom design these bins with steeper side walls and larger slide gates for less flowable material. They can be made larger or smaller, from aluminum or stainless steel. Look over our the list of features and options on the backpage and let us build a bin to suit your needs.

    Standard Features:
    •Two Way Fork Channels
    •Flared Stacking Pads
    •14 ga Hopper
    •2″ x 1/4″ Angle Legs
    •4″ Slidegate
    •Blue Epoxy Paint

    Optional Features:
    •Four Way Vacuum Ports
    •Hinged Covers
    •Pallet Jack Enteries
    •Four Way Fork Channels
    •Foot Pads
    •4″ Casters (2- Rigid, 2- Swivel)
    • One Piece Lay-On Cover
    •1/3 – 2/3 Cover with Loader Mounting
    •Lexan Card Holder
    •Stainless Steel Construction
    •Custom Paints and Matching Colors
    Model # Description Height Height w/Vacuum Ports
    40-2000 Porta – Stor Bin, 20 cu ft / 700 lbs 32″ 36″
    40-3000 Porta – Stor Bin, 30 cu ft / 1050 lbs 42″ 46″
    40-4000 Porta – Stor Bin, 40 cu ft / 1400 lbs 52″ 56″
    40-5000 Porta – Stor Bin, 50 cu ft / 1750 lbs 62″ 66″
    40-6000 Porta – Stor Bin, 60 cu ft / 2100 lbs 72″ 76″

  • Array ( [0] => new-equipment [1] => material-handling-en [2] => new-equipment [3] => material-handling-en )
  • TILTERS


    Pneumatic Gaylord Bulk Box Tilt tables assist in the vacuum unloading of bulk box containers by automatically tiliting as bulk storage boxes are vacuumed out. 

    Standard Features:
    • Automatic or Manual Tilt Action
    • Hand Level Controlled
    • Flow Control to adjust down cycle speed
    • Seven Gauge Steel Deck
    • Adjustable Height Vacuum Wand Holder
    • 1″ Flanged Pivot Bearing
    • Double Convoluted Industrial Air Bag
    • 45 Degree Tilt Angle
    • Blue Epoxy Paint

    Optional Features:

    • Foot Pedal Control Valve
    • Pneumatic Turbine Vibrator w/ Controls
    • Custom Paints and Matching Colors

    The Premier Ground Entry Gaylord Tilter is designed to assist in the vacuum unloading of Gaylord containers. The auto-matic tilting feature allows com plete removal of material from the container with little or no assistance from your operator. The adjustable regulator permits setting initial lift at any desired weight: this unit will lift 1000# with only 80psi. air pressure! Normal operation is to begin tilting action when the box is around half empty. Tilt Tables are durable and easy to maintain. We use heavy duty 1″ flange bearings to ensure smooth controlled pivoting. Our seven gauge deck along with its sound structural design make it durable enough to withstand years of abuse. These units will reduce labor cost by freeing your operator from tending his raw material flow. They also reduce material waste with the effortless, complete emptying of your container!

    Standard Gaylord Box Tilter

    Ground Entry Tilter

    Low Profile Tilter

    Side Tilt Parts Unloader

    The SideTilt Parts Unloader is designed to ease the back breaking task of unloading boxes by hand. The automatic tilting action allows the user to easily remove parts from Gaylord sized containers. The adjustable regulator permits setting initial lift at any desired weight. This unit will lift 1400# with only 80psi air pressure! Ensign Equipment Parts Unloaders are durable and easy to maintain. We use heavy duty flange bearings to ensure smooth con trolled pivoting. Our ten gauge top deck is reinforced with structural steel to make it durable enough to stand years of abuse.

    Standard Features:
    • Automatic or Manual Tilt Action
    • Foot Pedal Controlled
    • Flow Control to adjust Operating Speed
    • 10 Gauge Steel Deck
    • 4 Bolt Flange Bearings, 1″
    • Double Convoluted Industrial Air Bag
    • 45 Deg. Tilt Angle
    • Blue Epoxy Paint

    Optional Features

    • Remote Hand Lever Control Valve
    • Pneumatic Turbine Vibrator with Controls
    • 110v Electric Vibrator with Controls
    • Custom Paints and Matching colors


  • Array ( [0] => new-equipment [1] => material-handling-en [2] => new-equipment [3] => material-handling-en )
  • DUMPERS


    Hydraulic Gaylord Bulk Box Dumpers offer one of the fastest methods of emptying bulk boxes. Rotation and gravity allowfor rapid introduction of product or material into a system

    Standard Features:
    •Bucket Rotation 135 deg.
    •Motor 1.5 h.p.
    •NEMA 12 Electrical Enclosure
    •Hydraulic Cylinders w/ 24″ stroke, 2″ bore, 2″ rod
    •Adjustable Retaining Bar 32″ to 48″
    •Up Cycle Completion Limit Switch
    •Down Cycle Flow Control Valve
    •Cycle Time- 30 sec. Up, 15 sec. Down
    •Greasable Sleeve Type Main Bearings
    •Blue Epoxy Paint

    Optional Features:
    •Gaylord Entry Guides
    •Velocity Fuse, (catches bucket in case of hydraulic rupture)
    •Custom Size and Shape Buckets
    •Dust Hood with Discharge Hatch
    •Dust Containment Doors on Bucket
    •Dumper Stands 12″ to 72″
    •Floor Grate in Bucket
    •Double Acting Hydraulics
    •Explosion Proof Electrical
    •Stainless Steel Chute Liner
    •Stainless Steel Construction
    •Custom Paints and Matching Colors

    Model No. Description
    31-2500 Dumper, Rear Load, 2500 lbs, Cap., 3 Phase, 48″ Wide Bucket
    31-2550 Dumper, Rear Load, 2500 lbs. Cap., Single Phase, 48″ Wide Bucket
    31-5200 Dumper, Rear Load, 2500 lbs. Cap., 3 Phase, 52″ Wide Bucket
    31-5250 Dumper, Rear Load, 2500 lbs. Cap., Single Phase, 52″ Wide Bucket

    We Also Offer

    Lift & Dump Gaylord Dumpers
    Diagonal Corener Gaylord Dumpers
    Super Sack Unloading Stations
    Bag Breaker Stations