-
FILTERHEADS & BAGS
Side / Remote Mounted Filter Heads-Dust Containment
Sterling’s Side Mounted Filter Head is a low cost method of filtering discharge air from cyclones. Filter heads utilize highly efficient shaker felt filter bag material for dust collection which filter air to a 6-10 micron level. Filter Heads are adaptable to all manufacturers’ cyclones.
-
CYCLONES
CYCLONES
Sterling’s cyclones are designed for efficiency and performance. The proper cyclone size is essential in your material handling system. Sterling’s cyclones are available in capacities ranging from 300 to over 15,000 CFM and feature 14 gauge steel and angle iron ring construction.
Options Include:
- Stainless Steel Construction
- Support Stand
- Side Mounted Filter Head
- Top Mounted Filter Head
- Spiral Breaker Strip – Eliminates Bridging at the Cone Collar with Light Density Materials
- Rectangular Inlets (round is standard)
- Removable/Replaceable Wear Resistant Inlet
- Multiple Inlets / Dampered Inlets
- Flanged Inlet and/or Cone Collars
- Storm Damper
- Take-Off Cap
- Side Angle Support Kit
- Clean Out Door
-
SMALL GRANULATOR BLOWERS
AL-4 BLOWER – FOR SMALL GRANULATORS
Our AL-4 line of cast aluminum pneumatic blowers, which offers you a more compact pneumatic material handling system. The AL-4 blower is ideal for use in press-side arrangements or small press-side arrangement or small granulator evacuation systems.
A seamless housing construction eliminates the mess of hazardous dust, contamination, and leakage problems common to other aluminum blowers. The seamless design also eliminates out-of-round outlets, making it easy to connect hose, pipe, or reducers to the inlet and outlet.
- Available in sizes from 2″ to 4″ and 3/4 or 1 hp TEFC dual wound motor
- Up to 50 pounds/hour conveying capacity through a distance of up to 50 feet
- Optional hinge-mounted style that is attached directly to a machine base, making it a space-saving, integral part of the machine.
-
EXTREME WEAR BLOWERS
DIAMOND LINE WEAR RESISTANT BLOWERS
Our Diamond Line Wear Resistant Blowers are surface treated on the interior components to provide resistance to wear caused by abrasive materials. In applications involving these types of material, these blowers can easily last up to 400% longer than an ordinary, untreated blower. Sample applications include:
- post consumer or post industrial materials (PET)
- glass-filled materials
- rubber
- other abrasive materials
Putting a Diamond Line Blower in your system means you spend less time and money replacing worn-out parts. Not only are spare parts greatly reduced, but downtime associated with replacement of worn and fatigued parts is cut to a minimum.
All components that are subject to wear have been designed to accommodate easy replacement, including the housing, impeller, and outlet transition.
Diamond Line Blowers come with the following options:- available in both Direct Drive and V-Belt Drive models
- easily adjusted to one of 16 discharge positions for versatility in placement
- flow control valves or gates mounted on the inlet for control
- flanged inlets or outlets
- available in a variety of sizes to handle throughput rates from 50 – 10,000 lbs/hr
- sound dampening package to reduce noise
-
HINGED BLOWERS
EZ-AC HINGED BLOWERS
The EZ-AC hinged blower with it’s unique, compact design, provides fast, safe access to the blower’s interior for clean-out and maintenance. The need to disconnect the tubing in the blower system is eliminated, saving valuable, costly production time. Whether due to a material change in the system or to scheduled maintenance, access to the blower’s interior is now much easier and faster. The EZ-AC is available in floor-mount and machine-mount models.
The EZ-AC comes electrically interlocked for operator safety. The hinge, which provides access to the blower’s interior, is activated by a single latch mechanism, providing almost instant access to the impeller and inner housing.
-
PRESSURE BLOWERS
PRESSURE BLOWERS
Our line of Pressure pneumatic blowers are intended for use where a higher pressure is needed and the applications requires that the material not pass through the blower’s interior. These blowers are highly recommended for used in venturi, edge trim conveying, and Water Stripper applications. These blowers afford a higher level of pressure that is needed in certain air conveying environments.
Our blowers feature the following options:
- Available in both Direct Drive or V-Belt Drive configurations
- Available in sizes from 3″ to 8″
- Pressures to 52″ water
- TEFC dual wound motor standard (other voltages available)
- Flow control valves or gates mounted on the inlet for control
- Flanged inlets or outlets
- Easily adjusted to one of 16 discharge positions for versatility in placement
- Mild steel or stainless steel construction
-
DIRECT DRIVE & V-BELT DRIVE BLOWERS
V Belt Drive Blowers
V-Belt Drive blowers offer the advantage over Direct Drive blowers of having the capability to easily modify the amount of air used in your system through the use of different sheave arrangements. The housing and base feature all-welded, heavy gauge construction with a hand-finished interior to prevent material build-up and contamination.
The blower housing, impeller, and motor are all easily replaceable if worn or damaged. If your application involves conveying abrasive materials, consider our ST line of Blowers, which are designed to withstand wear.
Our V-Belt blowers feature the following options:- available in sizes from 3″ to 16″
- easily adjusted to one of 16 discharge positions for versatility in placement
- mild steel or stainless steel construction
- TEFC dual wound motor standard (other voltages available)
- flow control valves or gates mounted on the inlet for control
- flanged inlets or outlets
- sound dampening package to reduce noise
Direct Drive Blowers
Our Direct Drive dilute phase pneumatic blowers feature all-welded, heavy gauge construction for the housing and base, with a hand-finished interior to prevent material build-up and contamination.
The blower housing, impeller, and motor are all easily replaceable if worn or damaged. If your application involves conveying abrasive materials, consider our ST line of Blowers, which are designed to withstand wear.
Our Direct Drive blowers feature the following options:- Stainless steel construction
- Available in sizes from 3″ to 7″
- TEFC dual wound motor standard (other voltages available)
- Explosion proof motors
- Steel Impellers (Aluminum Standard)
