-
Stock#: 18472
USED CONAIR TB-100 4 COMPONENT BLENDER
Conair model TB-100 four component gravimetric blender. S/N TBM-223043. Manufactured 11/2008. Main mixer powered by a 1/4 HP 115/230-volt motor. 2″ center outlet with Industrial Magnetics magnet. 400 lbs. per hour maximum through-put (material type and density dependent) Includes two (2) Conair AL2 loaders with control boxes, True-Blend touch-screen blender controller, and home-made stand. Very good condition.
-
Stock#: 18394
USED MAGUIRE / NOVATEC WSB-940 4-COMPONENT BLENDER
Used Maguire/Novatec Model WSB-940 4-component gravimetric blender. Serial #T128978-38. New 2015. Has touch screen control, (4) hopper loaders with operator controls. Mounted on stand supplying approximately 48″ discharge height. Blender 110/1/60. 15 amps.
-
Stock#: 18154
USED 50 CUBIC FOOT TWIN SHELL BLENDER
Used approximately 50 cubic foot twin shell blender. Includes motor, but no intensifier bar.
-
Stock#: 18282
USED CONAIR TB2500 5 COMPONENT BLENDER
Conair model TB2M500 blender. S/N 318297. Five (5) component blender. Up to 8,000 lbs. per hour capacity (material type and bulk density dependent). Five (5) material bins with loader cut-outs on lid. 3 HP 230/460-volt main mixer motor. Includes SB-2 controller and factory stand. Manufactured in 2016.
-
Stock#: 18283
USED MAGUIRE WSB-1860T 6 COMPONENT BLENDER
Maguire model WSB-1860T six (6) component blender. Up to 4,500 lbs. per hour throughput capacity (material type and bulk density dependent). One each 1/2 HP 220-volt single phase and 5 HP blending motors. Maguire model WSB-1860T 100 recipe controller. S/N 88715. Includes one Whitlock VH-25, two AEC SRH-08, one SRH-16 vacuum receivers and one AEC VTC 1/5 convey controller
-
Stock#: 18284
USED MAGUIRE WSB-240RT 4 COMPONENT BLENDER
Maguire model WSB-240RT 4 component blender. S/N 97475-07. Up to 900 lbs per hour throughput capacity (material type and bulk density dependent). 1/6 HP 115/220-volt blending motor. Model WSB-941T 100 recipe blender control, S/N 90796. Includes two (2) Conair model DB12 and one (1) AEC WX-7310-ST receivers. AEC receiver has Auto-Load control. Also includes 3″ OD vacuum take off and factory stand
-
Stock#: 18096
USED PATTERSON DOUBLE CONE BLENDER / MIXER
Patterson double cone blender. Approximate 35 cubic foot capacity. Reported 1000 lb. batch. Includes motor. Non-jacketed
-
Stock#: 18002
USED CONAIR TB-500 4 COMPONENT BLENDER
One (1) used Conair model TB500 four (4) component gravimetric blender S/N TBM177738. 115-volt operation. Rated for up to 1500 pounds an hour (bulk density and material type dependent). Includes three (3) Conair model DB12 vacuum loaders with controls and one (1) Motan vacuum loader with control. 1/2 HP main mixer. No controller for main mixer
-
Stock#: 17765
USED AEC / HYDRECLAIM 4-COMPONENT BLENDER
AEC / Hydreclaim model 0S-007 4-component blender, 1/6 HP mixer motor, includes two Wittman vacuum receivers, approximately 250 lbs. per hour through put.
-
Stock#: 17770
USED L/R SYSTEMS 3-COMPONENT BLENDER
L/R Systems model IMB-250-MINIB blender, 3 components, 120-volts, 3 Syntron model F-TO magnetic feeders, mounted on stand, includes controls, manual, & schematics
-
Stock#: 16845
USED PATTERSON KELLY 10 CUBIC FOOT V-BLENDER
Patterson Kelly 10 cubic foot stainless steel V-Blender, S/N 27643, mounted on a stand with a 1.5 HP 1,735 RPM 575-Volt motor, gearbox has a 21.32:1 reduction ratio for an output of 82 RPM, machine is rated for 90 Lbs. per cubic foot material density, 8″ OD outlet.
-
Stock#: 4431
USED FOREMOST CLWF-1 GRAVIMETRIC BLENDER
Foremost gravimetric blender model CLWF-1, S/N 34677, consists of 2 hoppers, 1 ring compressor, and 1 FMC magnetic feeder mounted on a frame.
-
Stock#: 12336
USED MAGUIRE WSB122R WEIGH SCALE BLENDER
Maguire model WSB122R weigh scale blender, S/N 87627, up to four components, 330 to 450 Lbs. per hour maximum throughput (150-205 Kg/Hr), two 1.5″ x 3″ slide gates, two vertical valves, 60-90 PSI air operating pressure. Includes a programmable 100 recipe controller, 48″ x 34″ x 34″ 225 Lbs. Has a larger virgin or regrind hopper but is missing the two small additive / colorant feed hoppers.
-
Stock#: 12634
USED AEC OPTIMUM OL SERIES CONTINUOUS LOSS IN WEIGHT BLENDER
AEC Optimum OL series continuous loss in weight blender, S/N 35H0550, 4 components up to 5,000 Lbs. per hour maximum capacity. One 3″, one 2″, and two 1″ diameter augers with motors and feed hoppers. Hoppers have clear view section and includes a 6 component inverter drive panel with touch-pad programmable recipe controller.
-
Stock#: 12066
HYDRECLAIM VERTICAL BLENDER
Hydreclaim vertical blender. Unit has a 7″ OD auger enclosed in a tube which is belt driven by a 3 HP 230/460-volt motor, level sensor, measures 38″ x 38″ square and 85″ overall height. Mounted on legs.