Array ( [0] => extruders-twin-screw [1] => extruders-twin-screw )
  • Stock#: 18512

    USED CINCINNATI 112mm TWIN SCREW EXTRUDER


    Used Cincinnati model Argos 112P-65-20-1150-UL 112mm parallel counter rotating twin screw plastic extruder. S/N 2041843/010. Screw length approximately 3020mm long x 112mm diameter screw, L/D ratio of 27:1. Barrel is electrically heated and air cooled in 4 zones with air blowers air blowers with approximately .45 kw motors. Unit is driven by 65 kw, 420-volt, 2000 RPM 3 phase 50/60 hz motor through gearbox with 96:188 reduction ration. Unit has top entry Plasticolor 2200 vibratory feeder with horizontal screw feeder driven by 1.1 kw motor. Unit includes local controls. Manufactured in 2002.

  • Array ( [0] => extruders-twin-screw [1] => extruders-twin-screw )
  • Stock#: 18511

    USED CINCINNATI 80mm TWIN SCREW EXTRUDER


    Used Cincinnati model CMT80L-APC 80mm conical counter rotating twin screw plastic extruder. S/N 2040985/010. Screw length approximately 1,665mm long x 80mm diameter at the discharge. Has adapter plate that reduces the barrel exit down to 65mm diameter. Barrel is electrically heated and air cooled in 4 zones with air blowers with .45 kw motors. Unit is driven by 49 kw, 415-volt, 50hz main motor and gearbox with an output 25.5 RPM screw speed. Unit has top entry Plasticolor 2200 vibratory feeder with horizontal screw feeder driven by approximately .55 kw motor. Unit has local controls. Manufactured in 2002

  • Array ( [0] => extruders-twin-screw [1] => extruders-twin-screw )
  • Stock#: 18510

    USED BATTENFELD CM55 TWIN SCREW EXTRUDER


    Used Battenfeld-Cincinnati model CM55 counter rotating twin screw extruder. S/N 2804784/010. Conical screw design. Barrel is electrically heated and air cooled in three zones with air blowers with .20 kw motors. Unit is driven by 37 to 49.5 kw, 350 to 493 volt, 50.8 to 74.2 hz, 1500 to 2200 RPM electric motor with gearbox. Unit has top entry Plasticolor 2500 vibratory feeder with horizontal screw feeder driven by a .55 kw motor. Unit includes touchscreen controls.  Located in UK

  • Array ( [0] => extruders-twin-screw [1] => extruders-twin-screw )
  • Stock#: 18104

    USED LIESTRITZ 34MM CO-ROTATIONAL TWIN SCREW EXTRUDER


    Used 34mm (1.33″) Leistritz co-rotating twin screw extruder model LSM34GG. Has approximately 30:1 L/D barrel. Driven by 11 Kw (15 HP) D/C motor and SCR control. Eight zones of temperature control on integral panel. Closed loop water cooling system. Vacuum pump. 300 RPM max screw speed. 480/3/60 14 Kw for drive. 240/3/60 13 Kw for barrel. Manufactured in 1987. S/N 330 1551 01

  • Array ( [0] => just-arrived [1] => extruders-twin-screw [2] => just-arrived [3] => extruders-twin-screw )
  • Stock#: 17702

    USED WERNER & PFLEIDERER ZSK20 TWIN SCREW EXTRUDER


    Werner & Pfleiderer Model ZSK20 20mm co-rotating twin screw extruder. S/N 02-3108-1000-010-1, Has 40:1 L/D barrel at a 43″ center line driven through a 3:1 gearbox with a 37 newton meter torque capacity per screw shaft, extruder is powered by a 5 HP A/C motor with Allen Bradley 1336 Impact Drive unit, 588 RPM screw speed. Includes Brabender 1/2 HP model MS-FW40/Oplus-70 feeder, spare used motor and gearbox in unknown condition. Extruder manufactured 3/2003

  • Array ( [0] => just-arrived [1] => extruders-twin-screw [2] => just-arrived [3] => extruders-twin-screw )
  • Stock#: 17698

    USED WERNER & PFLEIDERER ZSK40 TWIN SCREW EXTRUDER


    Werner & Pfleiderer Model ZSK40 40mm co-rotating twin screw extruder, S/N 180399, 1990 model year, 46:1 L//D vented barrel with 11 barrel sections and a 41″ centerline. Driven by a 50 HP 500-volt 1750/2100 RPM D/C motor and SCR Control with a screw speed of 517 RPM. Includes Acrison 1.5 HP weight loss differential feeder, 2.2 KW Tervac vacuum pump, and side feeder.

  • Array ( [0] => extruders-twin-screw [1] => extruders-twin-screw )
  • Stock#: 16620

    USED STEER ENGINEERING 12mm TWIN SCREW EXTRUDER


    Steer Engineering Pharmaceutical twin-screw extruder, S/N EA00427. Model Omicron 12P new in 2014. Screw diameter is 12mm diameter ratio (do/di) is 1.45 flight depth is 1.9 max screw speed is 900 RPM 2HP drive, 480V/3ph/60Hz operation.

  • Array ( [0] => extruders-twin-screw [1] => extruders-twin-screw )
  • Stock#: 16813

    USED BRABENDER 25mm TWIN SCREW EXTRUDER


    Brabender model 088 twin screw extruder, air cooled. Includes DC motor and temperature control panel.