Array ( [0] => extrusion-screen-changers [1] => extrusion-screen-changers )
  • Stock#: 18760

    USED DYNISCO / BERINGER RM-60 6″ SCREEN CHANGER


    Used Dynisco Model RM60 slide plate screen changer. Set up for two nominal 6” diameter breaker plates which are not included. No hydraulic pump. Unit is set up for a c clamp upstream. Last used on a 6” Egan extruder.

  • Array ( [0] => extrusion-screen-changers [1] => extrusion-screen-changers )
  • Stock#: 18751

    USED DYNISCO EH-60 6″ SCREEN CHANGER


    One (1) Dynisco model EH-60 screen changer having two nominal 6″ diameter breaker plates.

  • Array ( [0] => extrusion-screen-changers [1] => extrusion-screen-changers )
  • Stock#: 18509

    USED MAAG 4″ CONTINUOUS SCREEN CHANGER WITH MELT PUMP


    Maag 4″ Continuous Screen Changer with Melt Pump. S/N 50125578-20. Consists of One (1) used Maag model CSC-096 screen changer having two (2) nominal 2.3.8″ breaker plates. Rated at 300-500 Kgs/hr (660-1100 pounds/hour). On caster mounted cart. With 3 HP hydraulic pump and controls. Downstream of the screen changer is a Maag model Extrex 45/45 melt pump. S/N 5012SS78-10. Unit is driven by a 5 HP inverter duty AC motor. Gear pump rated from 80-700 pounds an hour at 245 degrees C. Gear pump is also mounted on a cart.

  • Array ( [0] => extrusion-screen-changers [1] => extrusion-screen-changers )
  • Stock#: 18671

    USED BERINGER 3.5″ SCREEN CHANGER


    Beringer 3.5″ hydraulic screen changer with power pack

  • Array ( [0] => just-arrived [1] => extrusion-screen-changers [2] => just-arrived [3] => extrusion-screen-changers )
  • Stock#: 18492

    FULLY REBUILT BERINGER 12″ SCREEN CHANGER


    Fresh fully rebuilt Beringer model 1200 Hydraulic screen plate screen changer. 12″ nominal breaker plates. 42″ centerline. With stand and 10 HP hydraulic power pack.

  • Array ( [0] => just-arrived [1] => extrusion-screen-changers [2] => just-arrived [3] => extrusion-screen-changers )
  • Stock#: 18360

    USED EXTEK HSC-25 2.5″ SCREEN CHANGER


    One (1) used Extek model EH-25 screen changer having two (2) nominal 2.5″ breaker plates. S/N EH25100. Set up for use on a 2.5″ Gloucester extruder. Cleaned, evaluated, and repaired by Xalloy in 10/2011 and never put back into service. Offered less hydraulic package.

  • Array ( [0] => just-arrived [1] => extrusion-screen-changers [2] => just-arrived [3] => extrusion-screen-changers )
  • Stock#: 18363

    USED EXTEK HSC-25 2.5″ SCREEN CHANGER


    One (1) used Extek model EH-25 screen changer having two (2) nominal 2.5″ breaker plates. S/N EH25098. Set up for use on a 2.5″ Gloucester extruder. Cleaned, evaluated, and repaired by Xalloy in 10/2011 and never put back into service. Offered less hydraulic package.

  • Array ( [0] => just-arrived [1] => extrusion-screen-changers [2] => just-arrived [3] => extrusion-screen-changers )
  • Stock#: 18361

    USED EXTEK HSC-35 3.5″ SCREEN CHANGER


    One (1) used Extek model EH-35 screen changer having two (2) nominal 3.5″ breaker plates. S/N EH35161. Set up for use on a 3.5″ Gloucester extruder. Cleaned, evaluated, and repaired by Xalloy in 10/2011 and never put back into service. Offered less hydraulic package

  • Array ( [0] => just-arrived [1] => extrusion-screen-changers [2] => just-arrived [3] => extrusion-screen-changers )
  • Stock#: 18362

    USED EXTEK HSC-35 3.5″ SCREEN CHANGER


    One (1) used Extek model EH-35 screen changer having two (2) nominal 3.5″ breaker plates. S/N EH35160. Set up for use on a 3.5″ Gloucester extruder. Cleaned, evaluated, and repaired by Xalloy in 10/2011 and never put back into service. Offered less hydraulic package.

  • Array ( [0] => extrusion-screen-changers [1] => extrusion-screen-changers )
  • Stock#: 18303

    USED TRENDLEKAMP 8″ CONTINUOUS SCREEN CHANGER


    One used Trendlekamp model TASK8.1 dual bolt 8″ continuous screen changer. Includes support stand and hydraulic pumping unit. Manufactured in 2004

  • Array ( [0] => just-arrived [1] => extrusion-screen-changers [2] => just-arrived [3] => extrusion-screen-changers )
  • Stock#: 17999

    USED GNEUSS SFX75 3″ CONTINUOUS SCREEN CHANGER


    Gneuss model SFX75 3″ continuous screen changer. S/N. 02083047. 460/3/60 operation. Includes PLC control panel

  • Array ( [0] => just-arrived [1] => extrusion-screen-changers [2] => just-arrived [3] => extrusion-screen-changers )
  • Stock#: 17879

    USED BD PLAST 350mm (13.77″) SCREEN CHANGER


    BD Plast model BDO125-350 350mm (13.77″) hydraulic slide plate screen changer, S/N TOO28441, manufactured in 2005, includes 3.5″ inlet and outlet adaptors and Maag hydraulic power pack with four (4) accumulators and is powered by a 12 HP 480-volt motor with starter and controls. Type SP72-ND, S/N 85227694, manufactured in 2016. Also includes one (1) extra cylinder. Changer is rated 1600-3800 Kg/hour (3250-8360 Lbs/hour)

  • Array ( [0] => extrusion-screen-changers [1] => extrusion-screen-changers )
  • Stock#: 17880

    USED BD PLAST 350mm (13.77″) SCREEN CHANGER


    BD Plast model BDO125-350 350mm (13.77″) hydraulic slide plate screen changer, includes one (1) 4.5″ inlet and one (1) 3.5″ outlet adapters. No hydraulics. Includes one (1) extra cylinder. Changer is rated 1600-3800 Kg/hour (3250-8360 Lbs/hour)

  • Array ( [0] => extrusion-screen-changers [1] => extrusion-screen-changers )
  • Stock#: 17639

    USED BERINGER 12″ SCREEN CHANGER


    Beringer model 1200 12” hydraulic slide plate screen changer. Two (2) 12” nominal breaker plates. Mounted on stand for 42” Center-line height. Includes 10 HP hydraulic power pack

    5 Available

  • Array ( [0] => extrusion-screen-changers [1] => extrusion-screen-changers )
  • Stock#: 17616

    USED MGB SL12 12″ SCREEN CHANGER


    21409-11 One (1) used MGB Model SC12 slide plate screen changer having two (2) nominal 12″ diameter breaker plates. Unit is mounted on a stand with casters supplying approximately a 42″ discharge height. Package includes a 10 HP Power Motion hydraulic power pack with four (4) high pressure accumulators. Job number 1700. S/N SC12-0697-156

    2 units available

  • Array ( [0] => extrusion-screen-changers [1] => extrusion-screen-changers )
  • Stock#: 6395

    BERINGER NC-PVC-25 2.5″ SCREEN CHANGER


    Beringer model NC-PVC-25, 2.5″ screen changer. S/N 25NC15. Hydraulic power pack is not included.

  • Array ( [0] => extrusion-screen-changers [1] => extrusion-screen-changers )
  • Stock#: 10015

    3.5″ SCREEN CHANGER


    3.5″ hydraulic screen changer missing breaker plate unknown manufacturer.

  • Array ( [0] => extrusion-screen-changers [1] => extrusion-screen-changers )
  • Stock#: 16904

    USED 4.5″ SCREEN CHANGER


    Used 4.5″ hydraulically operated screen changer. Missing slide plate. Includes c-clamp. Appears to be a Berringer model SL-45.

  • Array ( [0] => extrusion-screen-changers [1] => extrusion-screen-changers )
  • Stock#: 2709

    HESTON 6″ SCREEN CHANGER


    6″ Heston screen changer, no model or serial number. 6″ diameter fits HPM extruder, with 3HP pump.

  • Array ( [0] => extrusion-screen-changers [1] => extrusion-screen-changers )
  • Stock#: 16576

    USED 8″ SCREEN CHANGER


    Unknown manufacture 8″ screen changer. Unit has a hydraulic cylinder but no valve controls. Unit is also missing the breaker plate/