Array ( [0] => feed-rolls [1] => feed-rolls )
  • Stock#: 16965

    USED CUMBERLAND X1000 FEED ROLL HOPPER SYSTEM


    Cumberland X1000 conveyor feed style hopper with feed rolls rear mounted. Steel knurled feed rolls are 8″ diameter x 39″ wide. Top pneumatic pinch roll is operated by a pneumatic cylinder with an approximately 4″ stroke. 3HP 208-230V/460V 1,765 RPM AC inverter duty motor slaved via pulleys and timing belt and cone drive. 50:1 gearbox for a roll speed of 73.8 feet per minute. Rolls are controlled by a new Rhymebus model RM5G variable speed drive. 4″ tall x 34″ wide material in-feed trumpet to rolls. Hopper has two 7″ x 13″ plate magnets on the conveyor in-feed side of the hopper.

  • Array ( [0] => feed-rolls [1] => feed-rolls )
  • Stock#: 16384

    USED AMBRIT 6″ X 48″ FEED ROLLS


    Ambrit 6″ diameter x 48″ wide feed rolls. Rolls are knurled steel driven by a 2HP DC motor through a Sumitomo 25:1 gearbox. 5HP maximum gearbox capacity. Pneumatically actuated roll pinch chain and sprocket drive from gearbox to rolls. Variable speed drive is not included.

  • Array ( [0] => used-equipment [1] => feed-rolls [2] => used-equipment [3] => feed-rolls )
  • Stock#: 5851

    USED 18″ WIDE FEED ROLLS


    18″ wide feed rolls. Both rolls are 6″ diameter x 18″ wide. One (1) rubber and one (1) made of knurled steel. Pneumatically actuated by two pneumatic cylinders. Rolls are powered by a 2HP 230V/460V motor through a 30:1 gear box.

  • Array ( [0] => used-equipment [1] => feed-rolls [2] => used-equipment [3] => feed-rolls )
  • Stock#: 6929

    USED GRANULATOR FEED ROLLS


    Used granulator feed rolls. 41.5″ wide x 4.5″ knurled steel feed rolls powered by a 2HP 1,750 RPM 230V/460V motor into a 15:1 gearbox. Rolls are chain and sprocket driven.

  • Array ( [0] => used-equipment [1] => feed-rolls [2] => used-equipment [3] => feed-rolls )
  • Stock#: 10092

    6″ OD X 52″ LONG FEED ROLLS


    Feed rolls, 6″ OD x 52″. One (1) steel roll, one (1) poly roll. 5HP DC drive motor with gearbox, pneumatically operated. Chain and sprocket driven.


  • Array ( [0] => used-equipment [1] => feed-rolls [2] => used-equipment [3] => feed-rolls )
  • Stock#: 10200

    USED DUAL IN-FEED CUMBERLAND 2062B HOPPER WITH REAR MOUNTED 48″ WIDE PADDLE FEED


    Cumberland dual in-feed 2062B hopper with rear mounted 48″ wide paddle feed. Paddles powered by a 3HP DC 180-Volt motor through Boston gear F231D-24-B9 24:1 gearbox, chain and sprocket driven paddles.

    Two are available.

  • Array ( [0] => used-equipment [1] => feed-rolls [2] => used-equipment [3] => feed-rolls )
  • Stock#: 10249

    USED PADDLE FEED ROLL


    Used paddle feed roll. 5″ diameter x 24″ wide 110V/1ph/60Hz 1/4HP motor air clutch chain and sprocket drive no controller.


  • Array ( [0] => used-equipment [1] => feed-rolls [2] => used-equipment [3] => feed-rolls )
  • Stock#: 10107

    USED 5″ X 12″ KNURLED STEEL FEED ROLLS


    Knurled steel feed rolls 5″ x 12″. Powered by a 1HP 230/460V AC motor into an Acrison, 60:1 gearbox. Upper roll is spring tensioned.

  • Array ( [0] => used-equipment [1] => feed-rolls [2] => used-equipment [3] => feed-rolls )
  • Stock#: 12078

    4″ DIAMETER X 24″ WIDE KNURLED STEEL FEED ROLLS


    Knurled steel feed rolls, 4″ diameter x 24″ wide. Air operated feed roll. Pinch rolls are driven by a 2HP 180V 1,750 RPM DC motor through a 5.3:1 gearbox.

  • Array ( [0] => used-equipment [1] => feed-rolls [2] => used-equipment [3] => feed-rolls )
  • Stock#: 12077

    USED 4″ DIAMETER X 24″ LONG WIDE FEED ROLLS


    Feed rolls, 4″ diameter x 24″ wide. One (1) smooth steel roll and one (1) knurled air operated roll pinch 2″ x 24″ wide in-feed trumpet. Rolls are driven by a 3HP 460V 1,755 RPM AC motor through a 5.55:1 gearbox.


  • Array ( [0] => used-equipment [1] => feed-rolls [2] => used-equipment [3] => feed-rolls )
  • Stock#: 14273

    USED AMBRITT 6″ DIAMETER X 50″ LONG STEEL FEED ROLLS


    Ambritt feed rolls, no S/N. 6″ diameter x 50″ long steel, knurled rolls in off-set position. Pneumatic pinch. 25:1 Sumitomo gearbox with a 1.0 service factor. New 3 or 5HP motor included.

  • Array ( [0] => used-equipment [1] => feed-rolls [2] => used-equipment [3] => feed-rolls )
  • Stock#: 14297

    USED AMBRIT 6″ DIAMETER X 46.5″ WIDE FEED ROLLS


    Ambrit 6″ diameter x 46.5″ wide feed rolls. S/N 1220. Both rolls are grooved steel powered by a 2HP 1,750 RPM 180V DC motor through a gearbox.

  • Array ( [0] => used-equipment [1] => feed-rolls [2] => used-equipment [3] => feed-rolls )
  • Stock#: 14581

    USED PROCESS CONTROL 14.5″ WIDE X 3.5″ DIAMETER FEED ROLLS


    Process control 14.5″ wide x 3.5″ diameter feed rolls. No S/N. Knurled steel rolls in vertical position powered by a 1.5HP 7.7A 1,750 RPM DC motor through 15:1 gearbox. Spring loaded pinch 11″ wide in-feed trumpet. No controls.

  • Array ( [0] => used-equipment [1] => feed-rolls [2] => used-equipment [3] => feed-rolls )
  • Stock#: 14597

    USED TRIA MODEL TRAINO D210 FEED ROLLS


    Tria model Traino D210 feed rolls. S/N 33202959. Code 886.000.161, 2003 model year. 8.25″ diameter x 56″ wide knurled steel rolls powered by a 3.7 kW (5HP) 208-230V/460V 1,725 RPM motor through a gearbox. Pneumatically operated cylinder. Non-driven roll pinch with 6″ travel includes original OEM stand-alone control panel. 11″ x 55″ flanged roll opening.