Array ( [0] => 0-10-hp-granulators [1] => 0-10-hp-granulators )
  • Stock#: 18216

    USED RAPID 300-45 GRANULATOR


    Rapid model 300-45 granulator. S/N 620.500310.10.1. 12″ x 18″ feed throat. 3 knife open rotor, 2 bed knife. 10 HP 230/460-volt motor. Insulated tray feed hopper. Tangential cutting chamber. Left hand 4″ OD airveyor discharge. Mounted on vibration pads. Complete with starter and controls. Very nice condition “lab use” unit with approximately only 10 hours use.

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => lab-testing-equipment [2] => 0-10-hp-granulators [3] => lab-testing-equipment )
  • Stock#: 17527

    USED RAPID GK158K LAB GRANULATOR


    Rapid model GK158K lab granulator, S/N 10.2796, 4″ x 6″ feed throat, 2 knife rotor, 2 bed knife, top hand feed hopper, 2 HP 380-440-volt motor that is wired 460-volts, 1/4″ holes screen installed, bin discharge, grinder mounts inside sound suppression cabinet which is on casters, complete with starter and controls, manufactured in 1989, Very good condition

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => 0-10-hp-granulators )
  • Stock#: 17525

    USED CONAIR CR-69 GRANULATOR


    Conair model CR-69 granulator, S/N RA-250.67350.3, 6″ x 9″ feed throat, 9 knife staggered rotor, 2 bed knife, 2.55 Kw (3 HP) 230/460-volt 1140 RPM motor, Robot / Hand in-feed hopper, 2″ OD vacuum take off discharge, on casters, complete with starter and controls, wired 460-volts

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => lab-testing-equipment [2] => 0-10-hp-granulators [3] => lab-testing-equipment )
  • Stock#: 17523

    USED CONAIR CR-66 GRANULATOR


    Conair model CR-66 granulator, S/N RA-260.65194.2, 6″ x 6″ feed throat, 6 knife staggered rotor, 2 bed knife, 2.55 Kw (3 HP) 460-volt 1140 RPM motor, Robot / Hand in-feed hopper, 2″ OD vacuum take off discharge, on casters, complete with starter and controls

    3 Available

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => lab-testing-equipment [2] => 0-10-hp-granulators [3] => lab-testing-equipment )
  • Stock#: 12707

    USED CUMBERLAND SIZE ZERO LAB GRANULATOR


    Cumberland model size zero (0) granulator, S/N 8925-55. 4.5″ x 5.5″ feed throat, 3 knife rotor, 2 bed knife, 3HP 115/220V single phase motor. Direct drive rotor tray feed hopper bin discharge, mounted on a 22″ x 28″ caster base. Complete with starter and controls..

    Two machines are available. The other unit is a 2HP 230/460V/3ph/60Hz configuration.

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => lab-testing-equipment [2] => 0-10-hp-granulators [3] => lab-testing-equipment )
  • Stock#: 12432

    USED GETECHA MODEL SRS100 A2 LAB GRANULATOR


    Getecha model SRS100 A2 laboratory granulator, S/N 15339.6. 60mm x 80mm (2.362″ x 3.149″) feed throat, 100mm (3.937″) cutting diameter and length 4.5mm round and angled perforation screen. 220 RPM rotor speed powered by a 0.63kW 265/460V motor. Stainless steel 2″ ID infeed chute. Mounted on casters. Manufactured in January, 2006.

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => lab-testing-equipment [2] => 0-10-hp-granulators [3] => lab-testing-equipment )
  • Stock#: 5247

    USED WANNER-TECHNIK MODEL 14.13-EZ-SS-FI LABORATORY SIZE GRANULATOR


    Wanner-Technik model 14.13-EZ-SS-FI laboratory style granulator, S/N 2926. 3 knife open rotor, 2 bed knives, 3HP 220/380V motor @ 50Hz, 3-phase. 140mm x 130mm (5″ x 6″) feed throat, top feed hopper, 2″ ID vacuum take off. Mounted on removable casters for bench mounting. Complete with starter and controls.

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => 0-10-hp-granulators )
  • Stock#: 4531

    UNUSED CUMBERLAND MODEL 68 ROBOT FEED GRANULATOR


    New Cumberland 6 x 8 robot feed hopper granulator, S/N 42600-98005. 16 segment knife rotor, 2 bed knives, 1/4″ hole screen, 1.5HP 480V motor. Bin discharge, mounted on casters, complete with starter and controls.

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => as-is-granulators-0-25-hp [2] => 0-10-hp-granulators [3] => as-is-granulators-0-25-hp )
  • Stock#: 16229

    USED AUTOGRIND MODEL 617 GRANULATOR


    Autogrind model 617 granulator, 6″ x 17″ feed throat, 18 knife staggered rotor, 2 bed knives. Approximate 3HP 460V motor. 6″ x 17″ top hand, robot in-feed, 2″ OD vacuum take off discharge. Mounted on a caster base, complete with starter and controls. 5/16″ screen installed.

    Price: $1,250.00, as is, running.

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => 0-10-hp-granulators )
  • Stock#: 16116

    USED RAPID MODEL 79K GRANULATOR


    Rapid model 79K granulator, S/N 20.2279. 7″ x 9″ feed throat, 3 knife slant cut open rotor, 2 bed knife, 5HP 230/460V motor. Insulated tray feed hopper, insulated body panels, bin discharge. Mounted on casters, complete with starter and controls.

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => 0-10-hp-granulators )
  • Stock#: 10928

    USED RAPID MODEL 79K GRANULATOR


    Rapid model 79K granulator, S/N 20.5244. 7″ x 9″ feed throat, 3 knife slant cut open rotor, 2 bed knives, 5HP 230/460V motor, insulated tray feed hopper, insulated body panels, bin discharge. Mounted on casters, complete with starter and controls.

    Three machines are available.

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => 0-10-hp-granulators )
  • Stock#: 16260

    USED NELMOR MODEL G810M1 GRANULATOR


    Nelmor model G810P1 granulator, S/N 9401-34123. 8″ x 10″ feed throat, 3 knife solid rotor, 2 bed knife, 3HP 208-230/460V motor. Double wall tray feed hopper, bin discharge, mounted on casters, complete with starter and controls.

    28 machines are available.

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => 0-10-hp-granulators )
  • Stock#: 16628

    USED NELMOR MODEL G810M1 GRANULATOR WITH PROFILE CHUTE


    Nelmor model G810M1 granulator, S/N 7205-4995. 8″ x 10″ feed throat, 3 knife solid rotor, 2 bed knife cutting chamber, 5HP 230/460V motor. Double wall tray feed hopper, with right hand 3.5″ x 3.5″ profile chute bin discharge, mounted on casters, complete with starter and controls.

    Two machines are available.

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => 0-10-hp-granulators )
  • Stock#: 16881

    USED BALL & JEWEL MODEL BP18 GRANULATOR


    Ball & Jewel model BP18 granulator, S/N 9502-34591. 8″ x 10″ feed throat, 3 knife open rotor, 2 bed knife, 5HP 230/460V motor. Single wall tray feed hopper, bin discharge, mounted on casters, complete with starter and controls. Manufactured in February, 1995.

    Three machines are available.

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => 0-10-hp-granulators )
  • Stock#: 14972

    USED NELMOR MODEL G810M1 GRANULATOR


    Nelmor model G810M1 granulator, S/N unreadable. 8″ x 10″ feed throat, 2 knife open rotor, 2 bed knife, 5HP 460V motor. Double wall tray feed hopper, bin discharge, mounted on casters, complete with starter and controls.

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => 0-10-hp-granulators )
  • Stock#: 16119

    USED NELMOR MODEL RG810P1 GRANULATOR


    Nelmor model RG810P1 granulator, S/N 9308-32503. 8″ x 10″ feed throat, 3 knife solid rotor, 5HP 230/460V motor. Insulated tray feed hopper and body panels, bin discharge, mounted on casters, complete with starter and controls.

    Seven machines are available.

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => 0-10-hp-granulators )
  • Stock#: 14978

    USED NELMOR MODEL RG810M1 GRANULATOR


    Nelmor model RG810M1 granulator, S/N 8609-24124. 12″ x 20″ feed throat, 2 knife open rotor, 2 bed knife, 5HP 230/460V motor. Double wall tray feed hopper, bin discharge, mounted on casters, complete with starter and controls.

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => 0-10-hp-granulators )
  • Stock#: 14301

    USED NELMOR MODEL RG810M1 GRANULATOR


    Nelmor model RG810M1 granulator, S/N 9307-33501. 8″ x 10″ feed throat, 5 knife solid rotor, 2 bed knife, 5HP 230/460V motor. Double wall tray, conveyor feed hopper, and insulated body panels, bin discharge, mounted on casters, complete with starter and controls.

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => 0-10-hp-granulators )
  • Stock#: 10723

    USED CUMBERLAND MODEL 184 GRANULATOR


    Cumberland model 184 granulator, S/N 239150-80105. 8″ x 10″ feed throat, 2 knife rotor, 2 bed knife, 5HP 230/460V motor. Insulated tray feed hopper and body panels, bin discharge, mounted on casters. Complete with starter and controls.

    Two machines are available.

    Add to QuoteDetails
    • Array ( [0] => 0-10-hp-granulators [1] => 0-10-hp-granulators )
  • Stock#: 6508

    USED BALL & JEWEL MODEL MD812X GRANULATOR


    Ball & Jewel model MD812X granulator, S/N 4298- 55184. 8″ x 12″ feed throat, 3 knife open rotor, 2 bed knife cutting chamber, 7.5HP 460V motor tray feed hopper, bin discharge, mounted on casters, complete with starter and controls.

    Add to QuoteDetails