Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 18273

    USED SEM / NELMOR G1424MB GRANULATOR


    Nelmor / SEM model G1424MB granulator. No S/N. 14″ x 24″ feed throat. 3 knife solid rotor, 2 bed knife. 40 HP 230/460-volt 1770 RPM motor with heavy duty outboard bearings. Single wall tray feed hopper. 6″ OD right hand airveyor discharge. Complete with starter and controls.

  • Array ( [0] => just-arrived [1] => 35-60-hp-granulators [2] => just-arrived [3] => 35-60-hp-granulators )
  • Stock#: 18250

    USED CONAIR CK1831 GRANULATOR SYSTEM


    Conair model CK1831 (Rapid 1831K) granulator. S/N 70.1124. 18″ x 31″ feed throat. 3 knife open rotor, 2 bed knife. Dual Fly-wheel. Tangential cutting chamber. 60 HP 230/460-volt motor. Pneumatic assisted Insulated conveyor feed hopper with a 81.5″ in-feed height. 5/16″ holes screen installed. Right hand 6″ OD airveyor discharge with Kongskilde OK160 flange adapter. Mounted on vibration pads. Includes starter and controls with fused disconnect. Also includes Cincinnati Fan model PBS-15A 10 HP blower with directly driven steel reinforced impeller and heavy duty housing. S/N 112833-01. Blower has 6″ OD inlet and outlet with Kongskilde OK160 rolled flanges. Conair CM2000 cyclone with stand and 6 bag filter manifold (bags, bag clamps, and connecting pipe is not included). Equipment is in very good operational condition.

  • Array ( [0] => just-arrived [1] => 35-60-hp-granulators [2] => just-arrived [3] => 35-60-hp-granulators )
  • Stock#: 18249

    USED CONAIR CK1831 GRANULATOR SYSTEM


    Conair model CK1831 (Rapid 1831K) granulator. S/N 70.1104. 18″ x 31″ feed throat. 3 knife open rotor, 2 bed knife. Dual Fly-wheel. Tangential cutting chamber. 60 HP 230/460-volt motor. Pneumatic assisted Insulated conveyor feed hopper with a 81.5″ in-feed height. 5/16″ holes screen installed. Right hand 6″ OD airveyor discharge with Kongskilde OK160 flange adapter. Mounted on vibration pads. Includes starter and controls with fused disconnect. Also includes Cincinnati Fan model PBS-15A 10 HP blower with directly driven steel reinforced impeller and heavy duty housing. S/N 111878. Blower has 6″ OD inlet and outlet with Kongskilde OK160 rolled flanges. Conair CM2000 cyclone with stand and 6 bag filter manifold (bags. bag clamps, and connecting pipe is not included) Equipment is in very good operational condition.

  • Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 18236

    USED CONAIR CE1221 GRANULATOR


    Conair model CE1221 granulator (Rapid 600C). S/N 50.2732. 12″ x 24″ feed throat. 8 knife staggered rotor, 3 bed knives. 50 HP 460-volt motor. Tray feed hopper with pneumatic assist tilt back. Gravity discharge. Vibration pad base. Includes starter and controls

  • Array ( [0] => 15-30-hp-granulators [1] => 35-60-hp-granulators [2] => 15-30-hp-granulators [3] => 35-60-hp-granulators )
  • Stock#: 18170

    USED CUMBERLAND 684 TWIN SHEAR GRANULATOR


    Cumberland model 684 granulator. S/N 291650-84002. 14″ x 26″ feed throat. 3 knife twin shear rotor, 2 bed knife. 30 HP 460-volt motor. Insulated tray feed hopper and body panels. 6″ OD airveyor discharge. On casters. Complete with starter and controls

    3 Available – 30 & 40 HP machines

  • Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 17939

    USED CUMBERLAND 1836 GRANULATOR


    Cumberland model 1836 granulator, no S/N, 18″ x 36″ feed throat, 3 knife open rotor, 2 bed knife, dual fly-wheel, tangential cutting chamber, Insulated tray feed hopper and body panels, 60 HP 460-volt motor, 8″ OD airveyor discharge, Fork-lift style base, with across the line starter and controls.  No pictures available as machine is fully disassembled

  • Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 18005

    USED CUMBERLAND 684 GRANULATOR WITH SHEET FEED


    Cumberland model 684 granulator. S/N 91000-92035. 14″ x 26″ feed throat. 3 knife twin shear rotor, 2 bed knives. 40 HP 230/460-volt 1775 RPM motor. Insulated tray feed hopper with rear 6.5″ x 26″ sheet feed. 6″ OD left hand airveyor discharge. Mounted on homemade fork lift rails. Includes original 460-volt OEM starter and controls.

  • Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 17796

    USED RAPID 1831K GRANULATOR


    Rapid model 1831K granulator, S/N 70.224, 18″ x 31″ feed throat, 3 knife open rotor, 2 bed knife, 50 HP 460-vollt motor, tangential cutting chamber, insulated tray feed hopper and body panels, 6″ OD left hand airveyor discharge, mounted on elevated homemade frame, includes starter and controls, 1989 model year

  • Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 3383

    USED GLOUCESTER MODEL 1225 GRANUALATOR


    Gloucester model 1225 granulator. S/N none. 12″ x 25″ feed throat, 5 knife open rotor, 2 bed knife cutting chamber. 40HP motor.

  • Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 14291

    USED CUMBERLAND MODEL 684 GRANULATOR


    Cumberland model 684 granulator. S/N 91000-92027. 14″ x 26″ feed throat, 3 knife open rotor, 2 bed knife, 40HP 460V motor. Left hand tray side feed hopper, 5″ left hand airveyor discharge. Mounted on a forklift base, complete with OEM starter and controls.

  • Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 12926

    USED CUMBERLAND MODEL 684 GRANULATOR


    Cumberland model 684 granulator. S/N 91000-87004. 14″ x 26″ feed throat, 3 knife open chevron cut rotor, 2 bed knife, 40HP 460V motor. Insulated tray feed hopper, 6″ airveyor discharge. Mounted on a forklift style base, complete with starter and controls.

    Four machines are available.

  • Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 10469

    USED CUMBERLAND MODEL 684 GRANULATOR


    Cumberland model 684 granulator. S/N 291650-7935. 14″ x 26″ feed throat, 3 knife twin shear rotor, 2 bed knife, 30HP 230/460V motor. Tray feed hopper, 5″ left hand airveyor discharge. Mounted on casters, complete with starter and controls.

    Three machines are available.

  • Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 14567

    USED WHITAKER MODEL 360B GRANULATOR (CUMBERLAND 1426i)


    Whitaker model 360B granulator (Cumberland 1426I), S/N 491546-92004. 14″ x 26″ feed throat, 3 knife scooped twin shear rotor, 2 bed knife, 60HP 460V motor with dual fly-wheel. 6″ left hand airveyor discharge, insulated tray feed hopper. Forklift base, starter and controls not included.

  • Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 12253

    USED CUMBERLAND USED 1456I GRANULATOR


    Cumberland model 1456 granulator. S/N 84000-782. 14″ x 56″ feed throat, 6 knife staggered rotor, 2 bed knife, 50HP 230/460V motor. Standard OEM style tray or conveyor hopper, 8″ airveyor. Mounted on a 42″ tall leg base. Starter and controls are not included.

  • Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 17355

    USED CUMBERLAND MODEL 1456i GRANULATOR


    Cumberland model 1456i granulator, S/N 84000-97021, 14″ x 56″ feed throat, 3 knife twin shear rotor, 2 bed knife, 50 HP 460-volt motor, 17″ x 56″ wide sheet feed hopper, 8″ dual tube design airveyor discharge, mounted on 15″ tall leg base mounted to a plate with vibration control pads, starter and controls are not included.

  • Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 16579

    USED CUMBERLAND MODEL 1524B GRANULATOR


    Cumberland model 1524B granulator. S/N none. 15″ x 24″ feed throat, new 3 knife high shear rotor, 2 bed knife, 50HP 230/460V motor. Tray feed hopper. Mounted to a 53″ tall x 65″ wide x 69″ deep gaylord gravity discharge base. Includes an across the line starter and controls.

  • Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 16385

    USED POLYMER MODEL 1624 GRANULATOR


    Polymer model 1624 granulator. 16″ x 24″ feed throat, 2 knife rotor, 2 bed knife. 40HP 460V motor, insulated tray feed hopper, 2HP right hand side mounted blower discharge with 4″ OD outlet. Mounted on casters, complete with starter and controls.

  • Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 2545

    USED FOREMOST MODEL S45 GRANULATOR


    Foremost model S45 granulator, S/N 24461. 16″ x 45″ feed throat, 3 fly knife, solid rotor, 2 bed knife cutting chamber. Twin 30HP motors, airveyor discharge.

  • Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 16507

    USED CUMBERLAND MODEL 1426i GRANULATOR


    Cumberland model 1426I granulator. S/N 291315-96009. 14″ x 26″ feed throat, 3 knife twin shear rotor, 2 bed knife, dual flywheel 50HP 460V motor. Insulated tray feed hopper with 8″ ID left hand pipe chute gravity discharged on a 66″ x 60″ x 51″ stand with 47.125″ box clearance. Includes size 3 starter and controls.

  • Array ( [0] => 35-60-hp-granulators [1] => 35-60-hp-granulators )
  • Stock#: 16314

    USED NELMOR MODEL G1820M GRANULATOR


    Nelmor model G1820M granulator. S/N 8906-28430. 18″ x 20″ feed throat, 3 knife open rotor, 2 bed knife tangential cutting chamber, 40HP 230/460V 1,140 RPM motor. 6″ airveyor discharge, insulated tray feed hopper and body panels. Mounted on a forklift base, complete with starter and controls