Array ( [0] => just-arrived [1] => 75-hp-granulators [2] => as-is-granulators-30-hp [3] => just-arrived [4] => 75-hp-granulators [5] => as-is-granulators-30-hp )
  • Stock#: 18256

    USED GRANUTEC TFG2548-XL100 GRANULATOR SYSTEM


    Granutec model TFG2548-XL100 granulator. S/N 1206.4438. 25″ X 48″ feed throat. 3 knife open rotor, 2 bed knife (6 pcs fly 4 pcs bed). Rotor driven by a 100 HP 230/460-volt 1190 RPM motor. Dual Flywheels. Tangential cutting chamber. Insulated tray feed hopper and body panels. 6″ OD right hand airveyor discharge. Mounted on forklift rails. Electronic jack screw assisted hopper tilt back and drop down for screen cradle. Complete with starter, controls, and disconnect. 2006 model year. System also includes Granutec 5 HP blower with 6″ OD inlet / outlet, steel impeller, and sound suppression enclosure. Also includes Granutec cyclone with 6″ OD inlet / 8″ OD outlet and lot of connecting pipe. Does not include a cyclone stand or filter-head.

  • Array ( [0] => 75-hp-granulators [1] => 75-hp-granulators )
  • Stock#: 18206

    USED RAPID 2442H GRANULATOR


    Rapid model 2442H granulator. S/N 80.829. 24″ x 42″ feed throat. 5 knife open rotor, 2 bed knife. Pneumatic assisted tray feed hopper. 100 HP 230/460-Volt motor. Rear facing 8″ OD airveyor discharge. Pneumatic assisted drop down screen cradle. Starter and controls not included

  • Array ( [0] => 75-hp-granulators [1] => 75-hp-granulators )
  • Stock#: 17955

    USED CUMBERLAND 1456i GRANULATOR


    Cumberland model 1456i granulator. S/N 84000-88011. 14″ x 56″ feed throat. 3 knife twin shear rotor. 2 bed knife. 100 HP 208-230/460-volt 1780 RPM motor. 8″ OD airveyor discharge. Mounted to a plate base with vibration pads. Starter and controls not included.  In-feed not included

  • Array ( [0] => 75-hp-granulators [1] => 75-hp-granulators )
  • Stock#: 17679

    USED CUMBERLAND 1837B CUTTING CHAMBER ONLY


    Complete Cumberland model 1837B cutting chamber only. 18″ x 37″ feed throat. New 3 knife high shear rotor, 2 bed knife. Includes fly-wheel and safety switches.

    No photos available – chamber is disassembled for future rebuild.


  • Array ( [0] => 75-hp-granulators [1] => 75-hp-granulators )
  • Stock#: 18023

    USED CUMBERLAND 1837B GRANULATOR


    Cumberland model 1837B granulator. S/N 50510-08007. 18″ x 37″ feed throat. 3 knife high shear rotor, 2 bed knife. 100 HP 230/460-volt 1775 RPM motor. Modified conveyor in-feed hopper. 8″ OD airveyor discharge. Mounted on 22″ tall plate base. Includes across the line starter and controls.

  • Array ( [0] => just-arrived [1] => 75-hp-granulators [2] => just-arrived [3] => 75-hp-granulators )
  • Stock#: 17982

    USED CUMBERLAND 2050B GRANULATOR


    Cumberland model 2050B granulator. S/N 51310-95013. 20″ x 50″ feed throat. 3 knife high shear hard-faced and water cooled rotor. 2 bed knives on water cooled bed blocks. 125 HP 460-1780 RPM motor. Modified conveyor feed hopper with 17″ x 8″ opening and plate magnet. Airveyor discharge has 8″ (OK200) outlet that can removed to return to standard 10″ OD. Hard faced chamber doors and bed shields. Air purge bearings. 1/8″ screen installed. Mounted on a step base. Includes Schneider Electric soft starter with enclosure.

  • Array ( [0] => just-arrived [1] => 75-hp-granulators [2] => as-is-granulators-30-hp [3] => just-arrived [4] => 75-hp-granulators [5] => as-is-granulators-30-hp )
  • Stock#: 18022

    USED CUMBERLAND X1400 GRANULATOR


    Cumberland model X1400 granulator. S/N 48250-05014. 24″ x 56″ feed throat. 3 knife twin shear rotor, 2 bed knife. 150 HP 460-volt 1775 RPM motor. Conveyor in-feed hopper with electronic jack back assist. 10″ left hand airveyor discharge. Electronic jack assisted drop down screen cradle. Includes soft starter control panel.

  • Array ( [0] => just-arrived [1] => 75-hp-granulators [2] => just-arrived [3] => 75-hp-granulators )
  • Stock#: 18021

    USED CUMBERLAND X1400 GRANULATOR


    Cumberland model X1400 granulator. S/N 48250-12004. 24″ x 56″ feed throat. 5 knife twin shear rotor, 2 bed knife. 150 HP 460-volt 1785 RPM motor. Hydraulic assisted tilt back conveyor in-feed hopper. Hydraulic assisted drop down screen cradle. 12″ OD airveyor discharge.  Starter and controls not included

  • Array ( [0] => just-arrived [1] => 75-hp-granulators [2] => just-arrived [3] => 75-hp-granulators )
  • Stock#: 18004

    USED FRANKLIN MILLER KM30 RUBBER BALE GRANULATOR


    Franklin Miller model KM30 “Vulcanator” rubber bale granulator. S/N 10828. 20″ x 25 feed throat. 3 knife guillotine style rotor, 3 bed knife. Dual fly-wheels. Powered by a 75 HP 230/460-volt 1780 RPM motor. 177 maximum amp load @ 230-volts and 88.7 @460-volts. Clam-shell chamber body design. 5/8 square holes screen installed. Gravity discharge. Chamber is mounted to 18″ tall let base. Designed for rubber bale grinding. Chamber is in good condition. 2019 model year. Comes with incomplete in-feed hopper. No starter or controls included.

  • Array ( [0] => 75-hp-granulators [1] => 75-hp-granulators )
  • Stock#: 18063

    USED NELMOR G1424MBP GRANULATOR


    Nelmor model G1424MBP granulator (SEM model 1400). S/N 8512-23386. 14″ x 24″ feed throat. Belt driven 3 knife solid rotor driven by a 75 HP 230/460-volt motor. 2 bed knives. Single wall tray feed hopper. Heavy duty outboard rotor bearings. 6″ OD right hand airveyor discharge. Cutting chamber mounted to short leg base that is attached to a plate base with vibration pads. Includes machine mounted 460-volt starter with 100 HP contactor.

  • Array ( [0] => 75-hp-granulators [1] => 75-hp-granulators )
  • Stock#: 17976

    USED NELMOR G2436M2 GRANULATOR


    Nelmor model G2436M2 granulator, S/N 7910-11951. 24″ x 36″ feed throat, 5 knife under-slung staggered rotor, 2 bed knife. No in-feed hopper. Dual 125 HP 460-volt 1185 RPM motors. Hydraulic operated split chamber design. 8″ rear facing airveyor discharge. mounted on base. Starter and controls are not included. 1/2″ holes screens installed.

  • Array ( [0] => 75-hp-granulators [1] => 75-hp-granulators )
  • Stock#: 17788

    USED CUMBERLAND 1426i GRANULATOR


    Cumberland model 1426i granulator, 14″ x 26″ feed throat, 3 knife twin shear rotor, 2 bed knife, 100 HP 460-volt motor, dual fly-wheel, insulated tray feed hopper and body panels, in-feed hopper has a 81″ in-feed height, 6″ OD left hand airveyor discharge, fork-lift style base, includes starter and controls

  • Array ( [0] => 75-hp-granulators [1] => 75-hp-granulators )
  • Stock#: 17787

    USED CUMBERLAND 1837B GRANULATOR


    Cumberland model 1837B granulator, 18″ x 37″ feed throat, 3 knife high shear rotor, 2 bed knife, 100 HP 460-volt 1180 RPM motor, conveyor in-feed hopper, 8″ OD airveyor discharge, mounted on a step base, starter and controls not included

  • Array ( [0] => 75-hp-granulators [1] => 75-hp-granulators )
  • Stock#: 17832

    USED CUMBERLAND 1837B GRANULATOR


    Cumberland model 1837B granulator, S/N 50510-84013, 18″ x 37″ feed throat, 5 knife steep angle rotor, 2 bed knife, 100 HP 460-volt 1775 RPM motor, conveyor in-feed hopper, 8″ OD airveyor discharge, mounted on a leg base, starter and controls not included

  • Array ( [0] => 75-hp-granulators [1] => 75-hp-granulators )
  • Stock#: 17689

    USED CUMBERLAND 2050B GRANULATOR


    Cumberland model 2050B granulator, S/N 651420-88001, 20″ x 50″ feed throat, new 5 knife 160mm high shear rotor, 2 bed knives (1 raised & 1 standard on upstroke), 200 HP 460-volt motor, solid chamber with swing out doors on both sides, drop down screen cradle with 10″ OD airveyor assembly, chamber is on a leg base mounted to a common plate, includes set of 1/2″, 3/8″, and 5/8″ holes screens, starter and controls are not included.

    Photo’s not yet available.

  • Array ( [0] => 75-hp-granulators [1] => 75-hp-granulators )
  • Stock#: 17619

    USED RAPID 2442R GRANULATOR


    Rapid model 2442R granulator, S/N 80.01.5970, 24″ x 42″ feed throat, 27 knife hog rotor, 3 bed knife, 100 HP 220/440-volt motor, pneumatically assisted tilt back top feed conveyor in-feed hopper with 29.5″ x 14″ x 78″ long feed chute, pneumatically assisted drop down screen cradle. 8″ OD airveyor discharge, mounted on a frame base with fork-lift rail entry, starter and controls are not included.

  • Array ( [0] => 75-hp-granulators [1] => 75-hp-granulators )
  • Stock#: 17620

    USED CUMBERLAND 1828B GRANULATOR


    Cumberland model 1828B granulator, No S/N, 18″ x 28″ feed throat, 3 knife steep angle rotor, 2 bed knife, 100 HP 230/460-volt 1785 RPM motor, tray feed hopper, 8″ OD airveyor discharge, mounted to a plate base, starter and controls not included

  • Array ( [0] => just-arrived [1] => 75-hp-granulators [2] => just-arrived [3] => 75-hp-granulators )
  • Stock#: 17505

    USED RAPID 2442M GRANULATOR


    Rapid model 2442M granulator, no S/N. 24″ x 42″ feed throat, 5 knife rotor with knife carriers, 3 bed knife, 100 HP 230/460V 1765 RPM motor. Dual flywheel, pneumatic assisted side feed hopper and screen cradle, 8″ airveyor discharge. Mounted on 26″ tall leg base, starter and controls are not included.

  • Array ( [0] => 75-hp-granulators [1] => as-is-granulators-30-hp [2] => 75-hp-granulators [3] => as-is-granulators-30-hp )
  • Stock#: 16405

    USED CUMBERLAND 20C GRANULATOR


    Cumberland model 20C granulator, S/N not legible. 9″ x 20″ feed throat, direct driven 3 knife rotor, 2 bed knife cutting chamber, 75HP 885 RPM 460V motor. No infeed hopper, gravity discharge, mounted on a 84″ wide x 39″ deep base, with starter and controls.

    Price: $17,500.00, as is.

  • Array ( [0] => 75-hp-granulators [1] => 75-hp-granulators )
  • Stock#: 16502

    USED NELMOR G1424MB GRANULATOR


    Nelmor model G1424MB granulator. S/N 8709-24998. 14″ x 24″ feed throat, 3 knife solid rotor, 2 bed knife. 75 HP 460V 1775 RPM motor. Conveyor feed hopper mounted on a short leg base, starter and controls are not included.