-
Stock#: 18263
USED NELMOR G2238 GRANULATOR
SEM / Nelmor model G2238 granulator. S/N 03L05691. 22″ x 38″ feed throat. 5 knife solid rotor, 2 bed (4 pc set). Rear feed with air transport inlet. 100 HP 230/460-volt ODP motor. 10″ OD airveyor discharge. 1/2″ holes screen installed. Unit has 1 HP hydraulic pump to open cutting chamber and manual hydraulic pump to operate the screen cradle. Granulator is mounted to a 97″ x 76″ common plate base. Granulator starter and controls are not included. Approximately 11,000 lbs.
2 Available
-
Stock#: 18381
USED TRIA 900/NS-R 12″ X 40″ FEED ROLL GRANULATOR
One (1) used Tria model 900 NS-R pull roll granulator. S/N 33-2051-7016. 12.5″ x 40″ feed throat (1020mm x 320mm). Five (5) knife open rotor with two (2) bed knives. Rotor is belt driven by a 22 Kw (30 HP). Feed hopper with rear mounted 36″ wide steel / serrated pull rolls. Air actuated feed rolls are powered by a 1 Kw (1.5 HP) A/C motor. 9″ x 19.5″ front material hopper entrance. 12.6 Kw (17 HP) blower discharge with Kongskilde OK160 piping and cyclone with filter bag. Approximate production rate of 400-600 kg/hr (880-1320 lbs/hr). Includes free standing panel with controls. Manufactured in 2004. Very Clean. 480/3/60. Offered “as is”
-
Stock#: 17829
USED CUMBERLAND 30-85 (30C) GRANULATOR
Cumberland model 30-85 (30C) granulator, S/N 45570-762, 16″ x 30″ feed throat, directly driven 3 knife radial rotor by a 100 HP 230/460-volt 880 RPM motor, 2 bed knives, conveyor in-feed hopper, Does not include hopper flaps, airveyor discharge, or starter and controls
-
Stock#: 17877
USED PALLMAN PS6-6 RUBBER GRANULATOR
Pallman “Ultra-Granulator model PS6-6, S/N 184.90.022, 22″ x 24.5″ feed throat (560mm x 630mm), 3 knife guillotine style rotor, 2 bed knife, 115 HP (86 Kw) 1780 RPM 440-volt motor with a 140 maximum amp load, rated 350 Kg to 3000 Kg per hour through-put, rated 1200-6500 Kg/hour for pre-cutting, machine is designed for rubber bales, 10″ OD airveyor discharge, 1/2″-5/8” square holes screen installed, starter and controls are not included, 1990 model year.
-
Stock#: 17478
USED MPG CS-2248 GRANULATOR WITH FEED ROLLS
MPG model CS2248 granulator S/N F726. 22″ x 48″ feed throat. 9 knife staggered open rotor, 2 bed knife (6 pcs). 150 HP 460-volt 1785 RPM motor. Water cooled cutting chamber. Modified and closed off conveyor style in-feed hopper with rear facing 47″ feed rolls powered by a 2 HP 460-Volt 1745 RPM motor. 8″ OD airveyor discharge. Forklift rail base with vibration pads. No starter or controls included.
-
Stock#: 16405
USED CUMBERLAND 20C GRANULATOR
Cumberland model 20C granulator, S/N not legible. 9″ x 20″ feed throat, direct driven 3 knife rotor, 2 bed knife cutting chamber, 75HP 885 RPM 460V motor. No infeed hopper, gravity discharge, mounted on a 84″ wide x 39″ deep base, with starter and controls.
Price: $17,500.00, as is.
-
Stock#: 16953
USED NELMOR G1436MB SHEET FEED GRANULATOR
Nelmor model G1436MB granulator. S/N 9604-37866. 14″ x 36″ feed throat, 3 knife solid rotor, 2 bed knife, 100HP 230/460V 1,770 RPM motor, wire for 460V. MB series heavy duty out-board bearing design. 8″ OD right hand airveyor discharge. Insulated body panels. Chamber mounted to 85″ x 76″ plate sheet feed hopper with a 36″ wide x 5.5″ opening and approximately 66″ long. 1/2″ holes screens are installed. Includes a soft starter control panel. also includes a medium cyclone that measures 36″ diameter barrel, 23″ straight side, 68″ long cone, with an 8″ inlet and 9″ outlet, with an approximately 20″ top opening and single bag filter head.
Price: $19,500.00 as is running.
-
Stock#: 5823
CUMBERLAND 1524B GRANULATOR
Cumberland model 1524B granulator. S/N none. 15″ x 24″ feed throat, 3 knife radial rotor, 2 bed knife, 50HP 230/460V motor. 54″ tall gaylord base, discharge tray feed hopper. Starter and controls are not included.
Price: $15,000.00, as is.
-
Stock#: 14086
USED CUMBERLAND 1828B GRANULATOR
Cumberland model 1828B granulator. S/N 49410-6936. 18″ x 28″ feed throat, 3 knife solid radial rotor, 2 bed knife. 125HP 1,185 RPM 460V motor, no in-feed hopper, airveyor discharge, mounted on a 50″ tall leg base.
Price: $20,000.00, as is, running.
-
Stock#: 14085
CUMBERLAND 1828B GRANULATOR
Cumberland model 1828B granulator. S/N none (unreadable). 18″ x 28″ feed throat, 3 knife solid radial rotor, 2 bed knife, 125 HP 1185 RPM 460-volt motor, tray feed hopper, airveyor discharge, mounted on a 50″ tall leg base. Includes starter & controls.
Price: $20,000.00, as is running condition
-
Stock#: 14638
USED MA INDUSTRIES 061995-A209 GRANULATOR
MA Industries model 061995-A209 granulator. S/N N-737-1045. 18″ x 37″ feed throat, 3 knife high shear rotor, 2 bed knife. 100HP 460V motor, tray feed hopper, 10″ bolt flanged airveyor discharge mounted on a 40″ deep x 88″ wide x 52.5″ tall step base. 36″ wide clear space under chamber. Includes across the line starter with controls.
Price: $55,000.00, as is.
-
Stock#: 16654
USED BALL & JEWEL SGU2026S GRANULATOR
Ball & Jewel model SGU2026S granulator, no S/N. 20″ x 26″ feed throat, 5 knife open rotor, 2 bed knife. 50HP 460V motor, tray feed hopper, airveyor discharge. Complete with 460V starter and controls.
Price: $9,500.00, as is, where is, running.
-
Stock#: 1725
CONDUX CS500/1000 GRANULATOR
Condux model CS500/1000-III granulator, S/N 44. Approximately 20″ x 40″, 6 knife fly, beam support rotor, 2 bed knife, 24″ base. No starter and no hydraulics.
Price: $15,000.00, as is, where is.
-
Stock#: 4018
USED WORTEX 2028 75 HP GRANULATOR
Wortex model 2028 granulator, no S/N. 20″ x 28″ feed throat, 6 knife open rotor, 2 bed knife cutting chamber, 75HP 460V motor, conveyor feed hopper with hydraulic tilt back assist, 8″ airveyor discharge.
Price: $19,500.00, as is.
A rebuilt quote is available – please call.
-
Stock#: 16042
USED CUMBERLAND MODEL 8085 GRANULATOR
Cumberland model 8085 granulator, S/N 80050-742 24″ x 25″ feed throat 3 knife open rotor 2 bed knife dual fly-wheel tangential cutting chamber. 50HP 460V motor, 8″ rear airveyor discharge conveyor feed hopper, mounted on a short plate base. Includes starter and controls.
Price: $19,500.00, as is, running.
A rebuilt quote is available – please call.