Array ( [0] => just-arrived [1] => hog-granulators [2] => as-is-granulators-30-hp [3] => just-arrived [4] => hog-granulators [5] => as-is-granulators-30-hp )
  • Stock#: 18787

    USED RAPID 2442RS HOG GRANULATOR


    Used Rapid model 2442RS hog granulator. S/N 85.505, 24″ x 42″ feed throat. 20 knife hog rotor with 24mm bolting. 3 bed knives. Dual flywheels. Con-Can style conveyor in-feed hopper with pneumatic tilt back assist. 8″ OD rear facing airveyor discharge. Belt driven by a 100 HP 230/460-volt 1765 RPM motor. 226 amps 230-volt, 113 amps 460-volt. No screen. Chamber and rotor are in good condition. Mounted to a frame base. Includes across the line starter / control panel.

  • Array ( [0] => hog-granulators [1] => hog-granulators )
  • Stock#: 18728

    USED CUMBERLAND 5018H HOG GRANULATOR


    Cumberland model 50180H hog granulator. S/N 551000-84002. 20″ x 50″ feed throat. 18 knife hog rotor. 2 bed knives (4 pcs) with one in the raised position. Pelican style in-feed hopper. 160mm rotor bearings with air purge. Belt driven rotor by a 150 HP 460-volt 1175 RPM TEFC motor. Cutting chamber is mounted to a step base. 10″ OD airveyor reduced to 8″ OD. Includes starter panel with a size 5 starter and a fused disconnect rated for 400 amps. Has 3/8″ holes screens installed and includes a used set of 5/16″ holes screens. Also includes Sterling model 9.5UHE evacuation blower. Belt driven impeller by a 15 HP with 10″ inlet and 8″ outlet transition.

  • Array ( [0] => hog-granulators [1] => hog-granulators )
  • Stock#: 18744

    USED CUMBERLAND 2050H HOG CUTTING CHAMBER OR COMPLETE GRANULATOR


    Cumberland model 2050H cutting chamber only. S/N 551000-86001. 20″ x 50″ feed throat. 18 knife hog rotor. 2 bed knives (4 pcs) with one in the raised position. Includes rotor drive pulley & bushing.

    Can also be purchased as a complete rebuilt granulator with OEM style base, airveyor, in-feed hopper, and 150 HP motor.

  • Array ( [0] => hog-granulators [1] => as-is-granulators-30-hp [2] => hog-granulators [3] => as-is-granulators-30-hp )
  • Stock#: 18724

    USED CUMBERLAND 2050H HOG GRANULATOR


    Cumberland model 2050H granulator. S/N 551000-86001. 20″ x 50″ feed throat. 18 knife hog rotor. 2 bed knives (4 pcs) with one in the raised position. No in-feed hopper. 160mm rotor bearings with air purge. Belt driven rotor by a 150 HP 460-volt 1182 RPM premium efficiency TEFC motor. Cutting chamber is mounted to a step base. 10″ OD airveyor reduced to 8″ OD. Includes starter panel with a size 5 starter and a fused disconnect rated for 400 amps. Has 3/8″ holes screens installed and includes a used set of 5/16″ holes screens

  • Array ( [0] => just-arrived [1] => hog-granulators [2] => as-is-granulators-30-hp [3] => just-arrived [4] => hog-granulators [5] => as-is-granulators-30-hp )
  • Stock#: 18633

    USED CUMBERLAND 3250 36 KNIFE HOG GRANULATOR


    Cumberland model 3250 hog granulator. S/N 57050-754-R. 32″ x 50″ feed throat. 36 knife hog rotor, 2 bed knife (4 pcs raised one side). Dual fly-wheels. Belt driven rotor powered by a 250 HP 885 RPM 460-volt motor. Tray style in-feed hopper. 10″ OD airveyor discharge. Granulator is mounted to a common plate base. Includes New York Blower series 30GI, size 224LS discharge blower. Starter and controls for granulator and blower are not included. Rotor has two (2) damaged knife seats.

  • Array ( [0] => 75-hp-granulators [1] => hog-granulators [2] => 75-hp-granulators [3] => hog-granulators )
  • Stock#: 14266

    USED RAPID 2442R GRANULATOR


    Rapid model 2442R granulator, S/N 80.354. 24″ x 42″ feed throat, 27 knife hog rotor, 2 bed knife, dual fly-wheel 100HP 230/460V motor, Pneumatically assisted tilt back conveyor, feed hopper, pneumatically assisted drop down screen cradle. 8″ airveyor discharge, mounted on a frame base, starter and controls are not included.

  • Array ( [0] => used-equipment [1] => hog-granulators [2] => used-equipment [3] => hog-granulators )
  • Stock#: 4494

    NELMOR G3036M2 GRANULATOR


    Nelmor G3036M2 granulator, S/N 7604-8858. 10 knife staggered hog rotor, 2 bed knife, 30″ x 36″ feed throat, mounted on a forklift base. Hydraulically assisted cradle side feed hopper, twin 125HP 460V 1,140 RPM motors. Overall floor footprint of 110″ x 84″.