Array ( [0] => just-arrived [1] => rebuilt-granulators-15-30-hp [2] => feed-paddle-roll-granulators [3] => just-arrived [4] => rebuilt-granulators-15-30-hp [5] => feed-paddle-roll-granulators )
  • Stock#: 18497

    REBUILT AEC WG1256 PADDLE FEED GRANULATOR


    Rebult AEC model WG1256 thermoforming granulator. S/N 509000-10002. 12″ x 56″ feed throat, 5 knife twin shear rotor, 2 bed knife. 30 HP 460V motor. Pneumatic assisted cutting chamber opener. 8″ right hand airveyor discharge, mounted on casters. Includes 10 HP blower with aluminum impeller and sound enclosure. Stand alone original OEM starter / control panel for the granulator and 10 HP interlocked blower. Manufactured in 2010.

  • Array ( [0] => rebuilt-granulators-15-30-hp [1] => 15-30-hp-granulators [2] => rebuilt-granulators-15-30-hp [3] => 15-30-hp-granulators )
  • Stock#: 18413

    REBUILT WHITAKER MODEL 280 (CUMBERLAND 584) GRANULATOR


    Rebuilt Whitaker / Cumberland model 280 / 584 plastic granulator having a 14″ x 20″ throat opening with a three (3) slant cut open rotor. S/N 535881-93004. Rotor is belt driven by a nominal 30 HP motor. Factory sound enclosed Insulated tray feed hopper and body panels. Set up for 5″ OD left hand airveyor discharge. Caster mounted for mobility. 5/16″ screen installed. Starter and controls included.

  • Array ( [0] => rebuilt-granulators-15-30-hp [1] => rebuilt-granulators-15-30-hp )
  • Stock#: 18187

    REBUILT NELMOR G1215M1 GRANULATOR


    Rebuilt Nelmor model G1215P1 granulator. S/N 97T00939. 12″ x 15″ feed throat. 3 knife solid rotor, 2 bed knife. 15 HP 208-230/460-volt motor. Double wall tray feed hopper. Bin discharge. On casters. Complete with starter and controls

  • Array ( [0] => rebuilt-granulators-15-30-hp [1] => 15-30-hp-granulators [2] => rebuilt-granulators-15-30-hp [3] => 15-30-hp-granulators )
  • Stock#: 17980

    REBUILT CUMBERLAND 584 GRANULATOR W/SIDE FEED


    Cumberland model 584 granulator. S/N 335000-93010. 14″ x 20″ feed throat. 3 knife open rotor, 2 bed knife. 20 HP 230/460-volt motor. Left hand insulated side feed hopper at a 48″ in-feed height. Insulated body panels. 6″ OD airveyor discharge. Mounted on casters. Complete with starter and controls.

  • Array ( [0] => rebuilt-granulators-15-30-hp [1] => under-the-press-granulators [2] => rebuilt-granulators-15-30-hp [3] => under-the-press-granulators )
  • Stock#: 12597

    USED IRWIN CHESAW TYPE CH-LH 28.7-04 GRANULATOR


    Irwin Chesaw type CH-LH 28.7-04 granulator, S/N 7915, 5″ x 33″ rotor cutter, 15HP 208-230/460V 1,760 RPM through a fan cooled 10:1 gearbox. Lincoln auto-lube system, evacuated by a 5HP 208-230/460V 3,460 RPM blower with steel impeller and OK100 (4″) outlet, approximately 3/8″ holes screen, mounted on casters, complete with starter and controls for blower and Siemens micro-master 440 variable speed drive unit for granulator rotor speed.

    This is a lab test machine in like new condition.

  • Array ( [0] => rebuilt-granulators-15-30-hp [1] => under-the-press-granulators [2] => rebuilt-granulators-15-30-hp [3] => under-the-press-granulators )
  • Stock#: 12598

    USED IRWIN CHESAW TYPE CH-LH 28.7-04 GRANULATOR


    Irwin Chesaw type CS-LH 28.7-04 granulator, no serial number, 5″ x 33″ rotor cutter, 15HP 208-230/460V 1,760 RPM motor through a fan cooled 10:1 gearbox. Lincoln auto-lube system, evacuated by a 4″ auger system, approximately 3/8” holes screen, mounted on casters, starter and controls for auger and variable speed drive for granulator rotor speed. Includes a 5HP 208-230/460V 3,460 RPM blower with a steel impeller and an OK100 outlet that can be used in lieu of a removable auger system.

    This is a lab test machine in like new condition.