-
Stock#: 18163
USED SCHENCK PROCESS GRAVIMETRIC FEEDER
Used Schenck Process model Model MC-1G-1A gravimetric feeder. S/N 103429-01A-MECGM. 2.5″ OD auger screw. Includes control panel. Manufactured in 2006
-
Stock#: 18162
USED SCHENCK PROCESS GRAVIMETRIC FEEDER
Used Schenck Process model MODLO-1G-2A gravimetric feeder. S/N 90472-01B-MECGL. 1″ OD auger screw. Includes control panel. Manufactured in 2004
-
Stock#: 18161
USED SCHENCK PROCESS GRAVIMETRIC AUGER FEEDER
Used Schenck Process model MODMC-1G-1A gravimetric feeder S/N 99393-01A-MECGM, 2.5″ OD auger screw. Includes control panel. Manufactured in 2006
-
Stock#: 18009
USED CARMAN INDUSTRIES LIVE BOTTOM BIN
One (1) used Carman Industries model 46BD live bottom bin. Unit is mounted on a stand. 10″ outlet. ¾ HP vibratory motor. Includes 40″ x 40″ x 69″ extension with access door. 109″ to the top of the stand. Overall height is 206″. Includes two bindicators. Last used to feed a 4.5″ reclaim line. S/N CH10459
-
Stock#: 17822
USED ACRISON 105Z-HH VOLUMETRIC FEEDER
Used Acrison model 105Z-HH volumetric feeder. S/N 14530-03. Stainless-steel contact parts. Interior lump breaker. Missing screw and discharge tube. 1 HP A/C motor. No drive. Bindicator on in-feed hopper. Large Foremost receiver mounted on in-feed hopper. Very clean. 208-220/460/3/60 operation
-
Stock#: 17820
USED ACRISON 4 COMPONENT FEEDER SYSTEM
One (1) used Acrison four (4) component volumetric feeding system. Manufactured in 1999. Includes the following:
A) Acrison model 101-1-K feeder.. Approximately 3 ¾” ID discharge tube. 1 HP DC motor. Serial number 99180-02 .
B) Acrison model 101-D feeder. Approximately 1 ½”” ID discharge tube. .5 HP DC motor. Serial number 99180-03 .
C) Acrison model 101-1-K feeder.. Approximately 3 ¾” ID discharge tube. 1 HP DC motor.
D) Acrison model 105Z-K feeder. Approximately 3 ¾” ID discharge tube. 1 HP DC motor. Serial number 99180-01
E) Acrison control panel for up to 5 feeders.
-
Stock#: 17828
USED FOREMOST FEED THROAT FEEDER W/LOADER
One (1) used Foremost model TF-2 at the throat feeder. Includes receiving hopper and vacuum loader. No controls. S/N 38170
-
Stock#: 17824
USED MAGUIRE ADDITIVE FEEDER
One (1) used Maguire model MCF-4-34 concentrate feeder. Unit is rated for one to seven pounds an hour throughput. ½” screw. Includes controller. S/N 27387. 110/1/60 operation.
-
Stock#: 16864
USED ERIEZ MAGNETICS 15A VIBRATOR FEEDER
Eriez magnetics model 15A vibrator feeder, S/N 227803. 115V operation includes a Unicorn solid state controller model UN-115-2A-FM, S/N 10758-8, 115-Volt operation.
-
Stock#: 16771
USED K-TRON KCLQX3 SCREW FEEDER
K-Tron model KCLQX3 material screw feeder. Stainless steel construction, 1″ auger screw installed. K-Tron SCM smart logic control module. 20 PPH, 2,400 RPM. Includes a 3/16″ spare screw and outlet, and a 1/2″ spare screw and outlet.
-
Stock#: 16763
USED SCHENK ACCURATE MATERIAL FEEDER
Schenck AccuRate material feeder, stainless steel construction live hopper, 1″ OD auger screw, 54″ long discharge. Model PWS-17238 load cell. No controls are included.
-
Stock#: 16764
USED SCHENK ACCURATE MATERIAL FEEDER
Schenck AccuRate material feeder, S/N 55740-06A-MECGM. Stainless steel construction live hopper, two 1/4″ OD auger screws, 26″ long discharge. Model PWS-17238 load cell. Includes controls.
-
Stock#: 16151
USED ACCU-RATE 2″ AUGER FEEDER
Accu-Rate auger feeder, S/N none, stainless steel body, 2″ OD screw auger, twin DC motors with an internal DC power supply. 18″ x 18″ x 12″ deep plastic lined material trough. Includes dual motor control for the auger and agitator.
-
Stock#: 16622
USED TUSKIN P1076 LIQUID COLORANT MIXER
Tuskin Equipment Corporation model P1076 liquid colorant mixer, S/N 140341. 1/6HP 110V 40 RPM motor. 4″ OD mixer chamber, coats up to 210 Lbs. per hour pellets. 2″ OD material feed throat, 6″ x 6″ feed throat mounting under in-feed hopper and directly to feed throat of process machine. Appears to have never been used.
Two are available.
-
Stock#: 16309
USED ACRISON STAINLESS MATERIAL FEEDER
Used Acrison model GP403-75-50-101-C gravimetric weigh feeder, S/N 98064-02 manufactured in 1998. Stainless steel contact parts 1″ diameter auger screw gearbox with a 15:1 reduction ratio is driven by a Baldor 0.25HP 1,750 RPM 90V DC motor with silicone controlled rectifier DC control. Includes load cell. Material breaker around screw vibrator on the hopper lid.
-
Stock#: 16308
USED ACRISON STAINLESS MATERIAL FEEDER
Used Acrison model GP403-300-100-101-GG gravimetric weigh feeder, S/N 97278-02. Stainless steel contact parts, 2 ½” diameter auger screw gearbox with a 30:1 reduction ratio driven by an Emerson DC 1HP 1750 RPM 90V DC motor with silicone controlled rectifier DC control with load cell vibrator on feed hopper and feeder. No lid on hopper with controls, 1997 model year.
-
Stock#: 16306
USED ACRISON STAINLESS MATERIAL FEEDER
Acrison model GP403-300-100-101-GG gravimetric weigh feeder, S/N 97278-07, manufactured in 1997. Stainless steel contact parts, 2-½” diameter auger screw gearbox with a 30:1 reduction ratio is driven by a Leeson DC 0.5HP 1,750 RPM 90V DC motor with a silicone controlled rectifier control. Unit has a load cell vibrator on the feed hopper and feeder. There is no lid on the hopper.
-
Stock#: 16209
USED ACRISON 105Z-H MATERIAL FEEDER
Acrison model 105Z-H stainless steel feeder, S/N 98447. 0.9 HP 90V DC motor, 1″ OD outlet stainless steel construction.
-
Stock#: 16152
USED ACCU-RATE 3″ OD AUGER FEEDER
Accu-Rate auger feeder, S/N none. Stainless steel body, 3″ OD screw auger, twin DC motors with internal DC power supply. 24″ x 24″ x 20″ deep plastic lined material trough. No motor controls.
-
Stock#: 14984
USED ACRISON 101-C AUGER FEEDER
Acrison model 101-C material feeder, S/N 809157. 1″ OD spring screw powered by a 1/4HP 90V DC 1,725 RPM motor. Includes Acrison variable speed control.