-
Stock#: 18064
SEM 2 HP BLOWER PAPER WASTE EVACUATION SYSTEM
SEM (Security Engineered Machinery) paper waste evacuation system. 7″ OD inlet. 10″ OD outlet. Includes blower, stand, 55 gallon collection drum on caster cart, and miscellaneous piping
-
Stock#: 18135
USED RONI VACUUM CUP JIB CRANE
One (1) used Roni Vacu-hand Pro Crane. S/N 215886-A. Unit is an articulated jib crane that uses vacuum with suction cups to lift up to 125 pound packages such as bags, boxes and drums. Last used in a plastic compounding facility. Includes controls
-
Stock#: 18124
USED BUNTING MAGNETICS SEPARATOR
Bunting Magnetics model PIM-6-CR separator. 6″ OD inlet and outlet. mounted on stand.
-
Stock#: 18016
USED ABELL-HOWE 2 TON JIB CRANE
Abell-Howe 2 ton jib crane. 18′ span. 18″ column and beam
2 Available
-
Stock#: 18015
USED COLUMBUS MICKINNON 2 TON TROLLEY CHAIN HOIST
Columbus McKinnon CM 635 series model WR chain hoist. S/N LW0860TS. 2 Ton maximum load. Eight feet per minute travel. 1/4 HP trolley and 1 HP chain drive. 110/120/1/60 control pendant. Motors are 115/208/230/1/60
-
Stock#: 18052
USED ERIEZ DOUBLE MAGNET DRAWER
Eriez model 12.5″ x 10″ TGH2 DSC GIH magnet drawer. S/N 337959. Style 201700114. Two (magnet drawers) and one (1) slide gate. 10″ ID bolt flange on inlet
-
Stock#: 18129
USED LANTECH 48″ PALLET WRAPPER
One (1) used Lantech E Series semi-automatic low profile pallet wrapper. ½ hp drive. With wrap counter and variable speed 48″ turntable. 115 volt. S/N W-0254
-
Stock#: 14351
USED PELLETRON P1 DE-DUSTER SYSTEM
Pelletron de-duster system. S/N P1043. Pelletron model P1 Tec Star mini pellet de-duster rated at up to 150 pounds an hour. Aluminum housing. Stainless steel wash deck. Package includes loading blower, receiver, de-duster and dust collector. 115v/1/60
-
Stock#: 18076
USED PPE PNEUMATIC GAYLORD TILTER
One (1) used Plastic Process Equipment model BT1600 pneumatic gaylord tilter. Includes wand supports. S/N BT160035280817
2 Available
-
Stock#: 18044
USED YALE 2 TON CHAIN HOIST WITH TROLLEY
One (1) used Yale model MDT02C electric hoist with trolley. Rated at 4,000 pounds lift capacity and 60 feet per minute trolley speed. Trolley is powered by a ¼ HP motor and the hoist is powered by a 2.5 HP motor. T-Pendulum controls. 460/3/60 operation. Order number 40434172. S/N TR3188TX. Manufactured 10/09
-
Stock#: 17818
UNUSED STERLING 4X7 CUTTER BLOWER SYSTEM
One(1) unused frame mounted Sterling cutter blower system consisting of one model 4 x 7 cutter with two (2) rotating blades and one (1) stationary blade directly driven by a 2 HP A/C motor. With muffler. S/N 88014. One (1) model 6005HFD blower with steel impeller directly driven by a 5 HP 3450 RPM motor. S/N 88014. Also includes control panel with starter and operator controls. 460/3/60 input
-
Stock#: 17870
USED BISHMON INDUSTRIES LX-200WM LIFT TABLE
Bishmon Industries model LX-200WM lift table, 2 HP 208/230-volt motor, 4400 Lbs lift capacity, 45″ x 61″ table area, 4.3″ minimum height. 39.4″ maximum height. 23 seconds up travel. 36 seconds down travel. 1100 Lbs. Includes auxiliary pump and control pendant.
2 Available
-
Stock#: 17806
USED PCI 78FP IN-LINE CHOPPER WITH BLOWER
One (1) used frame mounted PCI model 78FB cutter with two (2) rotating blades and one (1) stationary blade directly driven by a 2 HP 208-230/460-volt 1725 RPM A/C motor. Two trim inlets. S/N 71992. Trim cutter on unitized frame with Sterling model 6UHE blower with aluminum impeller and direct drive 5 HP 3450 RPM motor. S/N 13871 88. Includes integral control panel with motor starters and operator controls. 460/3/60 input.
-
Stock#: 17868
USED SOUTHWORTH LS2-48 LIFT TABLE
Southworth model LS2-48 lift table. 2,000 Lb. lift capacity. 48″ x 66″ table area. 8″ minimum height and 56″ maximum. Powered by a 3.2 HP 460/3/60 motor. Includes operator pendant. 950 Lbs.
2 Available
-
Stock#: 17777
USED SOUTHWORTH SPTU2-85 POWER LIFT / TILTER
Southworth Products model SPTU2-85 powered lift / manual-push container tilter. S/N 93155-1/1295274-1, 2,000 Lbs. load capacity. Hydraulic lift mechanism, locking casters, includes pendant up / down controller. Needs a new battery, but otherwise works fine.
-
Stock#: 17543
USED JET 1100 LB CAPACITY CHAIN HOIST
One (1) used Jet model 1/2SS-1G-10 chain hoist. Rated at 1100-pound lift capacity and at 14 feet per minute with a 10′ high lift. Includes manual trolley and pendulum controls. 115 volts
2 Availalbe
-
Stock#: 17539
USED MOVINGCOOL PORTABLE AIR CONDITIONER
One (1) used MovinCool Model 15SFU-1 spot industrial portable air conditioner. Caster mounted. Rated at 15,000 BTU cooling capacity. Good to 104 degrees f. Uses 1.9 pounds of R-22 refrigerant. Two cooling discharge ports.. Weighs 167.2 pounds. 230/1/60. 9.8 FLA
3 Available – two 15,000 BTU and one 10,000 BTU
-
Stock#: 17494
USED VACUUM SHREDDED PAPER & DUST COLLECTOR
Dust / shredded paper & dust vacuum collector, Model 3925Z208CV, S/N P98H07728, 120-Volts 14 peak Amps, 2″ OD take off vacuum port and 2″ OD exhaust port, motor over drum design
-
Stock#: 17423
USED PURITAN VERTICAL SPOUT MAGNET
Puritan model VS288EZ vertical spout magnet having a 3.5″ inlet and outlet. Stainless steel construction. Engineered to remove fine to large ferrous contaminants from high volume, gravity fed product streams. Puritan’s Vertical Spout Magnets are ideally suited for products that would bridge or choke in a magnetic tube type separator. Ferrous contaminants are easily removed from products that are moist, lumpy, granular, or in powder form.
Vertical Spout Magnets consist of a housing and two opposing Plate Magnets. A center diverter on the housing inlet helps direct product towards the magnets. Ferrous contaminants are pulled from the flowing product and are captured by the powerful magnets. A Single Trap face design eliminates the possibility of the captured tramp metal being washed off back into the product stream.
Cleaning is achieved by releasing the latch assembly and pulling the drawer open. As the drawer is opened the magnets remain in a stationary position. Ferrous contaminants are transferred outside the product flow area where they are safely discarded. A specially designed angled drawer end ensures all contaminants are released outside of the product flow area. As product enters the stainless-steel housing, it is diverted towards two very large and powerful magnets that oppose each other. A Single Trap face design eliminates the possibility of contamination wash-off.
-
Stock#: 17245
USED SESOTEC FS70 METAL SEPARATOR
Sesotec model Rapid-Vario FS70 metal separator, S/N 1001-3668-PP, 2016 model year, aluminum in-feed hopper, Primus+ touch pad controls, 110/240 volt input, two (2) 3″ OD discharge outlets. 0.60mm ferrous, 0.96mm non-ferrous, and 1.20mm stainless steel sensitivities.