Array ( [0] => injection-molding [1] => miscellaneous [2] => injection-molding [3] => miscellaneous )
  • Stock#: 18740

    USED SAVAGE 5 TON PLATTEN PRESS


    One (1) used Savage 5 ton dual-acting 4 post hydraulic compression molding press. S/N 2001. Having two (2) 60″ x 32″ electrically heated platens. 54″ left to right between the posts. 8″ of stroke on each platen. 7″ clearance between platens. Manufactured in 1995. Allen Bradley Panelview 600 microprocessor control. With manual.

  • Array ( [0] => lab-testing-equipment [1] => miscellaneous [2] => lab-testing-equipment [3] => miscellaneous )
  • Stock#: 18703

    PRODUCT DESIGN & DEVELOPMENT 2 LANE NOTCHER


    One (1) used Product Design and Development two lane profile notcher. Air actuated. 5″ x 2 ¼” cylinder. Two post design. Stand mounted.

  • Array ( [0] => lab-testing-equipment [1] => miscellaneous [2] => lab-testing-equipment [3] => miscellaneous )
  • Stock#: 18701

    PRODUCT DESIGN & DEVELOPMENT 2 LANE NOTCHER


    One (1) used Product Design and Development two lane profile notcher. Air actuated. 5″ x 1 ¼” cylinder. Two post design. Stand mounted.

    3 Available

  • Array ( [0] => lab-testing-equipment [1] => miscellaneous [2] => lab-testing-equipment [3] => miscellaneous )
  • Stock#: 18699

    USED INSTRON 5582 TENSILE TESTER


    One (1) used Instron model 5582 heavy duty tensile tester. S/N 55827924. Unit rated to 100 KN (22,500 pounds) Presently has a 50 KN (11,250 pounds) load cell installed. Last used for testing plastic lumber. Includes guards and controls. Manufactured 9/2007 and last calibrated 11/02/2017. Load cell weighs 330 pounds. Tester weighs 1900 pounds. 120/1/60 input power.

  • Array ( [0] => miscellaneous [1] => pipe-profile-cutters [2] => miscellaneous [3] => pipe-profile-cutters )
  • Stock#: 18526

    USED CANTEK CS-18R WOOD UP CUT SAW


    One (1) used Cantek model CS18 up cut saw for wood. S/N 33824. 18″ blade. 7.5 HP motor. 230 volt.

  • Array ( [0] => miscellaneous [1] => miscellaneous )
  • Stock#: 18595

    USED POLLUTION CONTROL PRODUCTS BURN OFF OVEN


    Pollution Control Products model SCTR-6-5493 burn off oven. S/N 6636. Natural gas fired. 360,000 BTU. Manufactured 3/2005. 120-volt controls

  • Array ( [0] => miscellaneous [1] => miscellaneous )
  • Stock#: 17876

    USED MAXON DUAL KNIFE ROTARY SHEETER


    One (1) used 65″ Maxson Dual Knife Rotary Sheeter. S/N 6213M . Model SDFK. Rated 300 FPM. Rexroth / Allen Bradley Controls. Unit has dual knives on rotating cutting head with a knife width of 67″. Load cell roll. Tidland shear slitting. Sheet length is 15″-60″ and can go longer without stacker. Sheet length accuracy plus/minus 0.015″. Shear cut slitting assembly (no knives included). Tape section for sheet discharge. Has reject gate. No overlap. Pile height 45″ maximum (including skid). Good for plastics, vinyl, specialty paper applications, paper, board, abrasive and laminated. No Backstand / Used In-Line

  • Array ( [0] => miscellaneous [1] => miscellaneous )
  • Stock#: 18593

    USED SWEED 510 SCRAP CHOPPER


    Sweed model 510 scrap chopper. S/N 3831. 3″ slot opening. Powered by a 1.5 HP 230/460-volt 1730 RPM motor via belt drive. Mounted on a homemade leg stand. Includes starter and controls.

  • Array ( [0] => miscellaneous [1] => miscellaneous )
  • Stock#: 18592

    USED SWEED 5110 SCRAP CHOPPER


    Sweed model 5110 scrap chopper. S/N 11684. Powered by a 5 HP 208-230/460-volt 1725 RPM motor thru a gear reducer. Mounted on a homemade leg stand. Includes starter and controls.

  • Array ( [0] => miscellaneous-en [1] => miscellaneous [2] => miscellaneous-en [3] => miscellaneous )
  • Stock#: 18572

    USED 5,000 LB CAPACITY DIGITAL FLOOR SCALE


    Rice Lake digital floor scale head. Triner model TSMS5-44 5,000 lbs. capacity platform. S/N 109542. Calibrated last 10/05/2023

  • Array ( [0] => miscellaneous [1] => miscellaneous )
  • Stock#: 18561

    USED WEG 100 HP SOFT STARTER PANEL


    Used Weg custom 100 HP soft stater panel. Weg SSW03 full digital soft starter with interlocked 5 HP blower starter. 460-volt panel has timer delay to shut off blower after main 100 HP soft start shut down. S/N MC16909. Through the door access door on NEMA 4/12 dust proof enclosure.

  • Array ( [0] => auger-conveyors [1] => miscellaneous [2] => auger-conveyors [3] => miscellaneous )
  • Stock#: 18218

    USED 6″ 1 HP AUGER WITH BIN


    Auger feeder. 6″ OD auger powered by a 1 HP 230/460-volt motor. 18″ long auger discharge tube. Bindicator on material bin

  • Array ( [0] => miscellaneous [1] => miscellaneous )
  • Stock#: 17785

    USED 50 HP ATL STARTER PANEL


    Stand alone starter enclosure. A/B series 509 50 HP 460v main starter. Has 2nd blower starter of unknown HP. Panel has through the door disconnect and two sets of start / stop buttons, 110v control transformer, and E-stop button.

  • Array ( [0] => miscellaneous [1] => vacuum-loaders [2] => miscellaneous [3] => vacuum-loaders )
  • Stock#: 17996

    USED 75 HP RAIL CAR UNLOADER


    Vac-U-Vator rail car unloader. Powered by a 75 HP 230/460-volt motor. With Dunbar model 01-D4122 airlock.

  • Array ( [0] => miscellaneous [1] => miscellaneous )
  • Stock#: 18030

    USED ALLEN BRADLEY 100 HP PANEL VIEW STARTER PANEL


    Stand alone Allen Bradley starter panel. 48″ tall x 36″ wide x 12″ deep enclosure. 200 amp thru the door disconnect. Has A/B Versa View Micrologix 1100 (model CE1000H) PLC controller. Includes one each size 4 100 HP 460v 135 max amp starter, one each A/B size 2 25 HP 460v 45 max amp starter, and one each A/B size 1 10 HP 460v 27 max amp starter. Single system start / stop buttons

  • Array ( [0] => hydraulics [1] => miscellaneous [2] => hydraulics [3] => miscellaneous )
  • Stock#: 18079

    USED CARVER HEATED HYDRAULIC PRESS


    One (1) used Carver up-acting 4 post hydraulic press having two (2) 18″ x 25″ electrically heated platens. Platen height is adjustable. Includes temperature controls but has no hydraulic pump.

  • Array ( [0] => conveyors [1] => miscellaneous [2] => pipe-profile-cooling-tanks-baths [3] => conveyors [4] => miscellaneous [5] => pipe-profile-cooling-tanks-baths )
  • Stock#: 18042

    USED MTI COOLING BELT WITH MATERIAL BREAKER


    One (1) used MTI cooling belt measuring 29 ½” wide x nominal 140″ long. Two spring loaded 31 ½” chrome rolls with rotary unions feed the stainless steel cooling belt. Top roll is 8″ diameter while the bottom roll is 19″ diameter. Discharge has a pin bar for breaking up the cooled product. Last used on powder coating. Includes controls.

  • Array ( [0] => miscellaneous [1] => pulverizers [2] => screeners-sifters [3] => miscellaneous [4] => pulverizers [5] => screeners-sifters )
  • Stock#: 18049

    USED YANTAI DONG MODEL 10 AIR CLASSIFYING MILL


    One (1) used Yantai Dong Yuan model 10 vertical air classifying mill. 11 KW (15 hp) main drive. Mill speed 0-700 rpm. Classifier motor 1.5 KW (2 HP), classifier speed 0-2800 RPM. Feeding motor .75 KW (1 HP). Particle size 40-80 UM. 100-200 kilograms per hour output. 575/3/60 operation. Last used on grinding powder coatings.  Includes some spare parts

  • Array ( [0] => just-arrived [1] => miscellaneous [2] => just-arrived [3] => miscellaneous )
  • Stock#: 17803

    UNUSED 600 HP 460 VOLT A/C MOTOR


    One (1) unused Marathon Blue Chip severe duty 600 HP A/C motor. 5011L Frame. 460/3/60. Max Safe RPM: 2800. Model: EC5011LNFS16532AA W. Serial Number: WAA031656. Manufactured 3/2007. With tachometer.

  • Array ( [0] => miscellaneous [1] => winders [2] => miscellaneous [3] => winders )
  • Stock#: 17873

    USED ENERCON COMPAK TF1002X CORONA TREATER


    One (1) used Enercon Industries 60″ wide single side bare roll corona treater. 60″ wide x 7″ OD film / sheet entrance roll. 7 KVA rating, 175-volt 25 Amp input. 9500-volt .23 Amp output high voltage transformer. 10-30 Khz frequency. Compac controls. S/N C21300-02 Last used on a PET lenticular film application.