Array ( [0] => blenders [1] => mixers [2] => blenders [3] => mixers )
  • Stock#: 18154

    USED 50 CUBIC FOOT TWIN SHELL BLENDER


    Used approximately 50 cubic foot twin shell blender. Includes motor, but no intensifier bar.

  • Array ( [0] => high-intensity-mixers [1] => mixers [2] => high-intensity-mixers [3] => mixers )
  • Stock#: 18276

    USED MEYERS 5 GALLON DUAL SHAFT MIXER


    One (1) used Meyers model R-V-L-550-3-3 dual shaft mixer. Five (5) gallon capacity stainless steel jacketed vessel rated at 14.7 PSI at 200 degrees Fahrenheit. Jacket rated at 60 PSI at 200 degrees Fahrenheit. Full vacuum rated at 14.7 PSI. Includes anchor blade and disperser blade that are each driven by a 3 HP motor. Explosion proof motor and controls. Air over hydraulic lift to raise mixing shafts. S/N 369. Manufactured 2/76

  • Array ( [0] => blenders [1] => mixers [2] => blenders [3] => mixers )
  • Stock#: 18096

    USED PATTERSON DOUBLE CONE BLENDER / MIXER


    Patterson double cone blender. Approximate 35 cubic foot capacity. Reported 1000 lb. batch. Includes motor. Non-jacketed

  • Array ( [0] => mixers [1] => mixers )
  • Stock#: 17998

    USED DAVIS HD-30 115 CUBIC FOOT PADDLE MIXER


    Davis model HD-30 paddle mixer. S/N 830231. Measures 94″ x 54″ x 60″ depth. Carbon steel construction. Approximately 115 cubic foot mixing capacity. Powered by a 20 HP 230/460 motor. No controls

  • Array ( [0] => mixers [1] => mixers )
  • Stock#: 17997

    USED KELLY DUPLEX 150 CUBIC FOOT VERTICAL MIXER


    Kelly Duplex vertical mixer. Measures 67″ tall straight side x 64″ long cone x 74″ diameter. Approximately 150 cubic foot capacity. Powered by a 7.5 HP 208-230/460-volt motor. Homemade discharge outlet. No controls.

  • Array ( [0] => just-arrived [1] => mixers [2] => just-arrived [3] => mixers )
  • Stock#: 17929

    USED METALMECANICA ROSSI STAINLESS MIXER


    One (1) Used Metalmecanica Rossi model MV stainless steel screw blender. S/N 0102. Blender is 7′ diameter x 10′ straight side x 6′ cone bottom. Includes (2) 4″ top mounted inlets and a 10″ x 12″ bottom outlet. Blender has an approximate total vessel volume of 450 cubic feet and an approximate working capacity of 300 cubic feet. Center enclosed screw is driven by 15 HP (11 kw) motor. Discharge includes air actuated valve and Eriez model 10.5″ x 8″ TGH-2 metal catcher. Swing open access hatch. Does not included legs. Manufactured in 2014.

    5 Available

  • Array ( [0] => mixers [1] => mixers )
  • Stock#: 18088

    USED NBE 45 CUBIC FOOT CAPACITY VERTICAL MIXER


    One (1) used National Bulk Equipment Co. vertical mixer. Approximate 45 cubic foot working capacity. Carbon steel construction. Has forklift rails for mobility. 1.5 HP 115/208-230-volt 1725 RPM motor. Includes starter with timer, but is missing start/stop button. Mixer dimensions are 48″ diameter x 35″ straight side x 34″ long cone

  • Array ( [0] => mixers [1] => mixers )
  • Stock#: 17721

    USED ROSS LDM-2 VACUUM DOUBLE PLANETARY MIXER


    Used Ross Model LDM-2 Vacuum Double Planetary Mixer, 2 Gallon Capacity, Stainless Steel Construction, Stainless steel, jacketed mix can . Driven by 1 HP 1/60/115-230 Volt variable speed Explosion Proof motor, Hand tilt, S/N 71970

  • Array ( [0] => mixers [1] => ribbon-blenders [2] => mixers [3] => ribbon-blenders )
  • Stock#: 17687

    USED STAINLESS STEEL 250 CUBIC FOOT CAPACITY RIBBON BLENDER


    250 cubic foot capacity non-jacketed stainless steel double ribbon blender, S/N 70-202. Ribbon is chain driven by a Reliance 75 HP 1785 RPM 460-volt 3-phase motor through a gearbox (presently missing). Trough dimensions are approximately 144″ L x 60″ W x 66″ D and has a center bottom discharge. Overall dimensions of the blender are approximately 186″ L x 67″ W x 107″ H. Mounted on 304 stainless steel legs. Last used on food products

  • Array ( [0] => high-intensity-mixers [1] => mixers [2] => high-intensity-mixers [3] => mixers )
  • Stock#: 17519

    USED PRODEX-HENSCHEL CM50 COOLER


    One (1) used Prodex-Henschel model CM50 bowl type cooler having a total vessel volume of 350 liters (12.3 cubic foot) and a working capacity of 150 liters (5.3 cubic foot). Bowl is manufactured of stainless steel and jacketed for cooling applications. Optional cooling ring installed. Blade is driven by approximately a 10 HP motor through a gear reducer. Air actuated discharge. Swing-away lid. Serial #8211. 460/3/60 input power

  • Array ( [0] => lab-testing-equipment [1] => mixers [2] => lab-testing-equipment [3] => mixers )
  • Stock#: 17573

    USED BOEKEL SCIENTIFIC ORBITAL MIXER


    Boekel Scientific Orbitron II model 260250 laboratory adjustable speed nutating mixer, S/N 0619001905, 115-volt power pack for 12-volt input, 6 watts power consumption, 1/2-amp load, adjustable speed from 6 to 23 orbits per minute, 23-degree fixed angle tilt allowing 3-dimensional wave mixing, 2.2 Lbs. maximum tray load

  • Array ( [0] => mixers [1] => mixers )
  • Stock#: 17501

    USED BANBURY 25 LB BATCH MIXER


    Used approximately 25 lb. batch size lab Banbury mixer driven by a 7.5/30HP DC motor supplying 450/1800 RPM. Has air floating weight, McCord lubrication, and rotary unions to each 2 wing rotor.

  • Array ( [0] => just-arrived [1] => mixers [2] => just-arrived [3] => mixers )
  • Stock#: 17421

    USED JAEGER RE-900 ROTARY BATCH MIXER


    Jaeger model RE-900 steel rotating batch blender, 403 cubic foot working capacity, carbon steel construction. Direct driven by a 40 HP motor through a gear reducer. Previously used for batch blending Approx. 10,000 pounds of plastic with additives

    18 FT X 8 FT X 10 FT Overall Dimensions

     

  • Array ( [0] => mixers [1] => mixers )
  • Stock#: 17299

    USED PADDLE MIXER 5 CUBIC FOOT CAPACITY


    Paddle mixer, approximately 5 cubic foot working capacity. Stainless steel jacketed chamber, air cylinder actuated center bottom discharge. Mounted on a stand supplying an approximately 48″ discharge height. Mixer is chain and sprocket driven by a 5 HP gear head motor. Includes a starter.

  • Array ( [0] => miscellaneous [1] => mixers [2] => ribbon-blenders [3] => miscellaneous [4] => mixers [5] => ribbon-blenders )
  • Stock#: 17022

    USED JH DAY FA3.5 NAUTA MIXER / DRYER


    Used 3.5 cubic foot JH Day Nauta mixer / dryer. 304 stainless steel construction rated vacuum internal at 353 degrees F. Jacketed for 125 PSI at 353 degrees F. 5HP drive through a gear reducer. Mounted on legs. S/N 42408. Manufactured 1988. JH Day certification number 1759.

  • Array ( [0] => blenders [1] => high-intensity-mixers [2] => mixers [3] => blenders [4] => high-intensity-mixers [5] => mixers )
  • Stock#: 16845

    USED PATTERSON KELLY 10 CUBIC FOOT V-BLENDER


    Patterson Kelly 10 cubic foot stainless steel V-Blender, S/N 27643, mounted on a stand with a 1.5 HP 1,735 RPM 575-Volt motor, gearbox has a 21.32:1 reduction ratio for an output of 82 RPM, machine is rated for 90 Lbs. per cubic foot material density, 8″ OD outlet.

  • Array ( [0] => feeders [1] => mixers [2] => feeders [3] => mixers )
  • Stock#: 16622

    USED TUSKIN P1076 LIQUID COLORANT MIXER


    Tuskin Equipment Corporation model P1076 liquid colorant mixer, S/N 140341. 1/6HP 110V 40 RPM motor. 4″ OD mixer chamber, coats up to 210 Lbs. per hour pellets. 2″ OD material feed throat, 6″ x 6″ feed throat mounting under in-feed hopper and directly to feed throat of process machine. Appears to have never been used.

    Two are available.

  • Array ( [0] => used-equipment [1] => high-intensity-mixers [2] => mixers [3] => used-equipment [4] => high-intensity-mixers [5] => mixers )
  • Stock#: 3854

    USED LITTLEFORD K1200


    Littleford PVC cooler model K1200, S/N none. 43.2 cubic foot total capacity and a 26 cubic foot working capacity. Interior bowl is manufactured of stainless steel and is jacketed for heating or cooling application. Blades are driven by a 25HP motor with a bottom auger discharge.

  • Array ( [0] => used-equipment [1] => mixers [2] => used-equipment [3] => mixers )
  • Stock#: 6915

    USED GELIMAT COMPOUNDER 10 LITER CAPACITY


    Gelimat high speed compounder with a nominal capacity of 10 liters (10″ x 14 ” mixing area), 8 Lbs. batch size. 75HP 230/460V 1,180 RPM motor. Direct feed top hopper direct drive with clutch brake system.