Product Categories: «Pipe & Profile Pullers»

USED CDS CBH36-6 6″ X 36″ BELT PULLER

CDS model CBH 36-6 belt puller. S/N 011106. Has nominal 6″ wide belts with 36″ of belt contact length. Set up for right to left operation. Top and bottom belt manually height adjustable via hand wheel. Belts are powered by a 3 HP D/C motor and SCR drive. Mounted on height adjustable jacking screws. Speed range is 5 to 54 feet per minute. Digital FPM readout. Manufacturers tag reads voltage input at 575/1/60 but unit input is actually 230/1/60. There is an removable internally mounted transformer that goes from 575/1/60 to 230/1/60. Needs new belts

USED CDS CBH36-6 6″ X 36″ BELT PULLER

CDS model CBH 36-6 belt puller. S/N 230202. Has nominal 6″ wide belts with 36″ of belt contact length. Set up for right to left operation. Top and bottom belt manually height adjustable via hand wheel. Belts are powered by a 3 HP D/C motor and SCR drive. Mounted on height adjustable jacking screws. Speed range is 5 to 54 feet per minute. Digital FPM readout. Includes safety cage around belts and mechanism. Manufacturers tag reads voltage input at 575/1/60 but unit input is actually 230/1/60. There is an removable internally mounted transformer that goes from 575/1/60 to 230/1/60. Needs new belts

USED CDS CBH36-6 6″ X 36″ BELT PULLER

CDS model CBH 36-6 belt puller. S/N 021106. Has nominal 6″ wide belts with 36″ of belt contact length. Set up for right to left operation. Top and bottom belt manually height adjustable via hand wheel. Belts are powered by a 3 HP D/C motor and SCR drive. Mounted on height adjustable jacking screws. Speed range is 5 to 54 feet per minute. Digital FPM readout. Manufacturers tag reads voltage input at 575/1/60 but unit input is actually 230/1/60. There is an removable internally mounted transformer that goes from 575/1/60 to 230/1/60. Needs new belts

USED UNITED PLASTICS MACHINERY 17″ X 55″ BELT PULLER

United Plastics Machinery profile puller. Pneumatically actuated 17″ wide x 55″ contact area belt at a 42″ center-line. Powered by a 20 HP D/C motor thru a gear box. Includes controls. 5775 lbs

USED BOBOR 4″ X 30″ BELT PULLER

One (1) used Bobor two belt puller having nominal 4″ wide belts with 30″ of contact length. Gap is manually adjustable via hand wheel on top belt. Belts are driven by approximately a 2 HP D/C motor. Set up for right to left operation.

3 Available

USED GOODMAN 4″ X 30″ BELT PULLER

One (1) used Goodman two belt puller having nominal 4″ wide belts with 30″ of contact length. Gap is manually adjustable via hand wheel on top belt. Belts are driven by approximately a 2 HP D/C motor. Controls are mounted on a swing arm and include digital speed indicator. Presently set up at a 44″ center-line height but has a great deal of adjustment. Caster mounted with jack screws. Set up for right to left operation. S/N 3958. 480/3/60 operation. 6 FLA.

USED KILLION CH-22 2″ X 20″ PROFILE PULLER

One (1) used Killion model CH-22 belt puller having 2″ wide belts with 20″ of contact length. Gap is manually adjustable via hand wheel on top belt. Belts are driven by a 1 HP D/C motor with tachometer. Controls are mounted on a swing arm and include digital speed indicator. Very clean. Presently set up at a 44″ center-line height but has a great deal of adjustment. Set up for right to left operation. Serial number 16619. 230/1/60.

USED MERRITT DAVIS 8″ X 108″ BELT PULLER

Merritt Davis model 80 belt puller, S/N WC04415-23. 460V/3ph/60Hz operation. 8″ wide x 108″ belt contact area. Top and bottom belts are driven by a drive shaft from an approximately 15HP motor with a manual hand crank gap adjustment with air cylinder pressure. Includes a variable frequency drive.

Two are available.

USED HOSE PULLER 1 HP

Hose puller 1HP motor driven through a gearbox timing belt. Drives a 3.5″ x 6″ long roll with idler roll and hose guide.