Array ( [0] => just-arrived [1] => shredders [2] => just-arrived [3] => shredders )
  • Stock#: 18473

    UNUSED JWC INTERNATIONAL 2 SHAFT SHREDDER


    One (1) unused JWC Industrial / Monster Industrial model 4-Shredd-1-H-3200 two (2) shaft shredder. Serial number 114685-1-1. The shafts are direct driven by a 25 HP 1770 RPM motor through a gearbox with a 29:1 reduction ratio. Nominal 15″x 30″ throat entrance. There is a total of thirty-six (36) cutters each having eleven (11) teeth. Cutters are 7/16″ thick and measure 7.5″ in diameter. Package includes stainless steel hopper, stainless steel stand, and controls. Frame mounted emergency stop button. Manufactured in 2020 and never put into production. Three spare cutters and three spare spacers are included. 575/3/60 input. Includes 230-volt to 575-volt transformer. Rated at under 70 DB.

  • Array ( [0] => shredders [1] => shredders )
  • Stock#: 18377

    USED HERBOLD RM1100/2 TWO SHAFT SHREDDER


    One (1) used Herbold model RM 1100/2 two (2) shaft shredder having a 19″ x 43 ½” throat opening. S/N 57611. Knives are 1-¼” wide and each has three hooks. Sixteen (16) cutters on each shaft. Shaft number one is driven by a 7.5 Kw (10 HP) electric motor while shaft number two is driven by a 37 Kw (50) HP electric motor. No stationary fingers. No base. Gravity discharge. Includes hopper with bale / part feed assist. No controls. 460/3/60 Operation. Manufactured in 1991

  • Array ( [0] => shredders [1] => shredders )
  • Stock#: 18197

    USED VECOPLAN RG52/100SPK SHREDDER


    Vecoplan model RG52/100SPK single shaft shredder. S/N 5542010. 15″ diameter rotor with sixty 40mm index-able crown cutters. Four pc counter knife set. 90 HP (67.11 kw) 460-volt 1778 RPM drive motor thru a Falk model 5407 gear box with a 13.89 gear ratio. Hydraulic ram is powered by a 7.5 HP hydraulic pump built in 2010. Hopper has a top opening of 115″ x 73″. Includes OEM starter panel with PLC and Weg soft starter.

  • Array ( [0] => just-arrived [1] => 75-hp-granulators [2] => shredders [3] => just-arrived [4] => 75-hp-granulators [5] => shredders )
  • Stock#: 18272

    USED WEIMA ZMK60 SHREDDER WITH GRANULATOR SYSTEM


    Used shredder / grinder combination system including the following:

    Weima four shaft shredder model ZMK60 with dual 25 HP 460-volt motors and controls. Has a 74″ x 55″ hopper opening narrowing to a 27″ x 50″ wide rotor chamber. Includes a hydraulic operated ram feed assist with pump. Has 3/4″ wide rotor blades for the middle two rotors and 1/2″ wide rotor blades for the outside two rotors. Has 2″ holes screen installed. S/N 900-985. Manufactured in 2005.

    20″ wide x 18 foot long discharge conveyor.

    Ensign 52″ wide bucket hydraulic gaylord box dumper

    Cumberland model 1828B granulator with 3 knife open rotor. Driven by a 50 HP 208-230/460-volt motor with starter. 1/2″ holes screen installed. Tray feed hopper. S/N 49410-7330.

    6″ OD x 72″ inclined screw conveyor for grinder discharge and additional 6″ OD inclined conveyor 14 feet long for assisting in grinder discharge.

  • Array ( [0] => shredders [1] => shredders )
  • Stock#: 17621

    USED SATRIND K10/30 SHREDDER


    Satrind model K10/30 dual shaft shredder, S/N N220599, 33″ x 40″ shredding chamber, thirty-three 30mm cutters approximately 2-3/8″ on center, twenty 50mm combs, gravity discharge, no motor, stand, controls, or hopper, 1999 model year. Gearbox requires 22 KW (30 HP) motor.

  • Array ( [0] => just-arrived [1] => shredders [2] => just-arrived [3] => shredders )
  • Stock#: 17213

    USED SHRED-PAX AZ-80 TWIN SHAFT SHREDDER


    Shred-Pax model AZ-80 twin shaft shredder, S/N 160-9216. 33″ x 63″ wide cutting chamber entrance. Carbon steel construction. Two rows of intermeshing knives measuring 1-3/4″ thick. Each shaft is driven by a 40HP 230/460V 1,750 RPM Sumitomo AC motor run through a Sumitomo CYCLO reducer. Mounted on a steel frame. Manufactured in 1992. Overall dimensions are 149″ x 53″ 94″. This machine is offered less the controls.

  • Array ( [0] => shredders [1] => shredders )
  • Stock#: 17190

    USED SHRED-TECH ST10EL SHREDDER


    Shred-Tech model ST10EL shredder, S/N E3480216. 13″ x 18″ cutting chamber with 5/8″ thick 2 hook knives powered by a 7.5HP 460V motor, 24″ x 29.5″ hopper opening, 126.5″ x 42″ foot print with a hopper in-feed height of 103″. 30″ diameter stainless steel de-watering trommel discharge with 1/8″ water draining holes. Hopper chamber enclosure and de-watering trommel are stainless steel. Included control panel runs both the shredder and trommel.