Array ( [0] => just-arrived [1] => balers [2] => just-arrived [3] => balers )
  • Stock#: 18414

    USED BALEMASTER AUTO-TIE BALER


    One (1) used Balemaster BB series model Q6,J.2.7,U,Z.7,J,I.2,Q.W auto-tie baler. S/N B0234-06-4298527. Bale section measures 30″ x 36″. Feed chute 28″ x 32″. 20 HP hydraulic package with 6″ diameter hydraulic cylinder. Ram rated at 85 lbs. per square inch at 3000 psi. Charging chamber is 25.3 cubic feet. PLC control with touch screen operator interface. Machine weighs 14,900 pounds with oil and no bale. Excellent condition. Limited use. Manufactured in 1995.

    $0.00
  • Array ( [0] => just-arrived [1] => 75-hp-granulators [2] => just-arrived [3] => 75-hp-granulators )
  • Stock#: 18420

    USED NELMOR G3030M1 GRANULATOR


    Nelmor model G3030M1 granulator. S/N 9405-34212. 30″ x 30″ feed throat. Tangential cutting chamber. 5 knife open rotor, 2 bed knife. 75 HP 230/460-volt drive motor. Insulated top front feed hopper attachment that can be removed to give a 40″ x 30″ front feed opening. 6″ OD airveyor discharge. Insulated body panels. Includes OEM stand alone control panel / starter for granulator and a 5 HP blower. Includes manual disconnect. Excellent grinder for drums, buckets, and large blow molded parts

    $0.00
  • Array ( [0] => just-arrived [1] => blenders [2] => just-arrived [3] => blenders )
  • Stock#: 18394

    USED MAGUIRE / NOVATEC WSB-940 4-COMPONENT BLENDER


    Used Maguire/Novatec Model WSB-940 4-component gravimetric blender.  Serial #T128978-38.  New 2015.  Has touch screen control, (4) hopper loaders with operator controls.  Mounted on stand supplying approximately 48″ discharge height.  Blender 110/1/60. 15 amps.

    $0.00
  • Array ( [0] => just-arrived [1] => shredders [2] => just-arrived [3] => shredders )
  • Stock#: 18473

    UNUSED JWC INTERNATIONAL 2 SHAFT SHREDDER


    One (1) unused JWC Industrial / Monster Industrial model 4-Shredd-1-H-3200 two (2) shaft shredder. Serial number 114685-1-1. The shafts are direct driven by a 25 HP 1770 RPM motor through a gearbox with a 29:1 reduction ratio. Nominal 15″x 30″ throat entrance. There is a total of thirty-six (36) cutters each having eleven (11) teeth. Cutters are 7/16″ thick and measure 7.5″ in diameter. Package includes stainless steel hopper, stainless steel stand, and controls. Frame mounted emergency stop button. Manufactured in 2020 and never put into production. Three spare cutters and three spare spacers are included. 575/3/60 input. Includes 230-volt to 575-volt transformer. Rated at under 70 DB.

    $0.00
  • Array ( [0] => just-arrived [1] => extruders-34-3 [2] => pelletizing-lines [3] => just-arrived [4] => extruders-34-3 [5] => pelletizing-lines )
  • Stock#: 18478

    USED HARTIG 2.5″ PELLETIZING LINE


    One (1) used 2.5” pelletizing line including the following:

    A. One 2.5″ Hartig extruder with a 24:1 L/D four (4) zone electrically heated, air cooled, and non-vented barrel at approximately a 42″ center line height. Serial number BE-836. 3″ round feed entrance. Koellmann gearbox has a reduction ratio of 13.95:1 and is rated at 108 HP at a service factor of 1.0. Gearbox is belt driven by a 50 HP GE D/C motor with Safetronics model DC-6 SCR control. Free standing temperature control panel has seven (7) zones of Eurotherm 3208 digital controllers. Water cooled screw with rotary union. Manufactured 1/21/1993. Very clean. 460/3/60 input power.

    B. Mounted on the discharge of the extruder is a six hole electrically heated strand die with downward orientation.

    C. Nominal 6’ long Emery stainless steel water bath measuring 14” wide x 8” deep with strand guides. Includes 54” x 34” x 24” stainless reservoir, Alpha Laval plate and frame heat exchanger with ½ hp pump and 1 ½ hp Liberty pump  for the water bath.

    D. Berlyn model HV-2 air stripper with nominal 10” slot opening, 2 HP blower, starter and disconnect. 460/3/60.

    E. 6” Cumberland “Quietizer” pelletizer having a sixteen (16) knife rotor with removable blades. S/N 326050-B-92016. Factory sound suppression enclosed. Air actuated top rubber roll. Rotor and pull rolls are V-belt driven by a 7.5 HP inverter duty A/C motor with Yaskawa V1000 inverter with remote keypad. Manufactured in 1992. Exceptional condition.

    All equipment is extremely clean and recently pulled from service. Great small line for reclaiming captive scrap.

    $0.00
  • Array ( [0] => just-arrived [1] => 75-hp-granulators [2] => just-arrived [3] => 75-hp-granulators )
  • Stock#: 18484

    USED NELMOR G3030HD GRANULATOR


    Nelmor model G3030HD granulator. S/N 9606-37721. 30″ x 30″ feed throat. 5 knife rotor with knife carriers, 2 bed knife. Dual Fly-wheels. Tangential cutting chamber. 100 HP 230/460-volt 1181 RPM motor. Insulated left hand side feed in-feed hopper with a 40″ x 30″ opening with an approximate 120″ from floor in-feed height. 6″ OD airveyor discharge. Forklift style base. Sound suppression body panels. Manual hydraulic assisted screen cradle. Starter and controls not included.  Ideal granulator for doing barrels, buckets, and large blow molded parts at high through-put rates.


    $0.00
  • Array ( [0] => just-arrived [1] => extruders-34-3 [2] => just-arrived [3] => extruders-34-3 )
  • Stock#: 18495

    USED DAVIS STANDARD 1″ 24:1 L/D EXTRUDER


    One (1) Used Davis Standard Model DS-10H 1″ heavy duty single screw extruder. S/N BK522. SO 83161. 24:1 L/D barrel having a three (3) zone electrically heated, air-cooled, and non-vented barrel at a 42″ centerline height. Gearbox has a reduction ratio of 12.80:1 and is rated at 24 HP at a service factor of 1.25 and is set up for a maximum screw speed of 100 RPM. Gearbox is belt driven by 3 HP A/C motor. Unitized temperature control panel has Allen-Bradley Panel View Plus touch screen controls. Zenith gear pump with 1 HP A/C drive system is mounted on the extruder discharge. Manufactured 1/2007. 230/3/60. 68 FLA. 60″ x 42″ x 88″. Approximately 2,000 Lbs. Overall Dimensions are Approximately 90″T x 58″W x 52″D. Last used on medical tubing in a technical college setting.

    $0.00
  • Array ( [0] => just-arrived [1] => 75-hp-granulators [2] => as-is-granulators-30-hp [3] => just-arrived [4] => 75-hp-granulators [5] => as-is-granulators-30-hp )
  • Stock#: 18494

    USED HERBOLD SML60/100-2 GRANULATOR


    One (1) used Herbold model SML 60/100-2 granulator having a 29″ x 38.5″ throat opening. S/N KA-016237-7951. 24″ diameter rotor. Four (4) knife slant cut open rotor is belt driven by a 105 KW (140 HP) 1775 RPM 400-460-volt motor. Single fly wheel. Outboard bearings. Offered less airveyor extension. 3/8″ screen installed. Conveyor feed hopper. Mounted on vibration pads. Includes hydraulic pump with cylinder for chamber opening. Includes 30″ wide TEC cleat type conveyor having 1″ high cleats with 23 ½” cleat spacing. Conveyor measures 196″ long with a 37″ long horizontal section and 3.5″ high side walls. Includes controls for granulator and conveyor.

    $0.00
  • Array ( [0] => just-arrived [1] => rebuilt-granulators-15-30-hp [2] => feed-paddle-roll-granulators [3] => just-arrived [4] => rebuilt-granulators-15-30-hp [5] => feed-paddle-roll-granulators )
  • Stock#: 18497

    REBUILT AEC WG1256 PADDLE FEED GRANULATOR


    Rebult AEC model WG1256 thermoforming granulator. S/N 509000-10002. 12″ x 56″ feed throat, 5 knife twin shear rotor, 2 bed knife. 30 HP 460V motor. Pneumatic assisted cutting chamber opener. 8″ right hand airveyor discharge, mounted on casters. Includes 10 HP blower with aluminum impeller and sound enclosure. Stand alone original OEM starter / control panel for the granulator and 10 HP interlocked blower. Manufactured in 2010.

    $0.00
  • Array ( [0] => just-arrived [1] => extrusion-screen-changers [2] => just-arrived [3] => extrusion-screen-changers )
  • Stock#: 18492

    FULLY REBUILT BERINGER 12″ SCREEN CHANGER


    Fresh fully rebuilt Beringer model 1200 Hydraulic screen plate screen changer. 12″ nominal breaker plates. 42″ centerline. With stand and 10 HP hydraulic power pack.

    $0.00
  • Array ( [0] => just-arrived [1] => high-intensity-mixers [2] => mixers [3] => just-arrived [4] => high-intensity-mixers [5] => mixers )
  • Stock#: 18501

    USED LITTLEFORD FKM600D MIXER


    Used Littleford FKM600D Stainless Steel Jacketed Mixer. S/N 42818-5293. Manufactured in 2001. Total capacity of 600 liters and a working capacity of approximately 350 liters. 75 PSI @ 320°F jacket pressure. Stainless steel construction. Main drive motor is 15 HP into a Falk gearbox. Has two (2) chopper motors of 10 HP each

    $0.00
  • Array ( [0] => just-arrived [1] => high-intensity-mixers [2] => mixers [3] => just-arrived [4] => high-intensity-mixers [5] => mixers )
  • Stock#: 18502

    USED LITTLEFORD FKM1200D MIXER


    Used Littleford FKM1200D Stainless Steel Mixer. S/N 42820-5295. Manufactured in 2001. 1200 liter total capacity with a working capacity of 988 liters. Stainless steel construction.

    $0.00